Features:

  • Replaces 24-volt solenoids
  • High-quality construction
  • Connects sprinkler timers to valves
  • plunger is metal with a rubber tip (to seal).
Easiest repair ever!!!

Was having problems with water leakage by my valves and the water flow to the sprinklers was best if my existing solenoid was loose. This caused water leaking as well. Some valves seemed to buzz as well. After researching YouTube to troubleshoot, I decided to buy 1 solenoid. It completely solved all the problems. Bought a 2nd one and woolaaa, 2nd valve was working perfectly. Bought 2 MORE for my remaining zones and everything is working perfectly. And costed much less than if I went to the major box hardware store. Super easy to install and rewire. My sprinklers were installed 15 yrs ago...so I guess it was time. VERY SATISFIED!!!

Good value.

Good value, free shipping from prime made it cheaper and faster than if I ordered it for free pickup in store. If your control console wont activate your sprinkler stations but you can do it manually (by unscrewing the small black plastic screw on the valve) then you might need a replacement one of these.

Fixed my sprinklers

Last time one of these failed, the irrigation company charged $125 to come out and replace it. Did it myself this time and saved enough for a really, really nice dinner with GF. Search YouTube for installation instructions. Almost as easy as replacing a burnt out light bulb. Seriously.

Exact replacement worked perfectly

My sprinkler system is about 15 years old and one zone stopped working. I tested and confirmed that the voltage was present when zone activated. This solenoid was exact replacement and easy to replace.

so I guess that's better than the old one

Replaced some old solenoids that were acting up. The old ones had metal casings that were rusted through and peeling, and I was shocked they even worked as long as they did before shorting out. The new one has a plastic shell, so I guess that's better than the old one? So far it works like it should.

Perfect screw in fit.

Had one old control valve that was buzzing and not fully opening the flow to the sprinklers. Turned out to be fairly easy replacement. Worst challange was getting the wires bonded back together, they were cut short in the original installation. Would buy again if I have another failure.

Excellent replacement Solenoid

Replaced a solenoid in a Nelson valve that is 20 years old. It worked immediately. Easy to screw in and to attach the 24 volt wires.

Good Replacement for Nelson Systems

Excellent replacement solenoid for my Nelson irrigation valves. The wire leads are much more durable than the wires on the original equipment.

Fits Orbit valves

I have several models of Orbit valves and was worried, but these fit what I have. Typically I just replace the whole thing as the cost difference is minimal, but this was a great deal

Good product

Works just fine. Installation depends on your system but you just screw it in and connect the wires.

Full Reviews