Features:

  • ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Best Price i could find

I did a near complete front end replacement on my '05 Silverado 2500HD. I replaced the pitman arm, idler arm, idler arm bracket, inner and outer tie rod ends, upper control arms, and lower ball joints. I used moog parts for everything. On the control arms, ball joints, and tie rod ends Amazon was a little less expensive than any other place i found, and with free two day shipping it was great. Parts are the genuine article and i was able to complete the project in a day and get an alignment the next morning. Very well pleased!

Gives your truck that ‘Like New ‘ Steering feel !

Came in a moog box with the rubber boot on as many have mentioned they received a white box and others without the rubber boot. Went on easy and took me about an hour to do both sides with an eyeballed alignment. You will need a 36mm wrench or big adjustable pliers to the install. Gives your truck that ‘like new ‘ steering feel and responsiveness.

Quality Product

First initial thought when I open the package was the high quality of the arm. I am always looking for the least expensive option and made a mistake buying the cheaper tie rods and ball joints. I recently placed a cheaper set of arms and ball joints on my truck only to have to replace them 6 months later. I highly recommend this product especially if you have a lift on your truck. I will stick with Moog, it might be a little more expensive but my time and safety is far more important.

Nice high quality part

Nice high quality part. I replaced both inner tie rod ends on my 2004 Escalade AWD with 3.5 inch lift and 33x12.50x20s. The truck is very hard on front end parts but these Moog parts look and feel a lot stronger than the OEM parts they replaced. Lifetime guarantee gives me piece of mind knowing that I wont have to pay for a new pair when these eventually wear out. They come with everything you need for installation, even lock tight.

2002 Yukon SLT 4WD

Moog makes a great product with a great fit. The quality really does meet or exceed factory specs. I replaced all of the moving parts in the suspension on my Yukon with Moog products. After an alignment, it has brought my ride quality back to a new vehicle feel. I would recommend these to anyone trying to restore handling and ride quality. These were installed on a 2002 Yukon SLT 4WD.

great quality

I purchased two of these to replace my factory ones after 260,000 miles. The rubber boots are thicker than the factory set, the steel seems to be better quality, and overall, this is a good part. It was really easy to install along with the outer tie rod end. The truck handles better and the steering is firmer than before. 2002 Chevrolet Silverado 2500HD 4x4 Duramax

Reliable quality

Perfect fit & function, the hardest part was putting my 2004 GMC Yukon on jack stands. Had to buy a large crescent wrench to get the inner tie rod separated from the steering link. Used Moog to replace both inner and outer tie rod. Be sure to grease all fittings on the tie rods and the steering link. A wheel alignment should be done as soon as possible after installing.

Great Part!

Perfect Fit and Part for a 2005 Chevrolet Silverado, ext cab, 4x4. No issues with it going on or the operation of it. Over the last 2-3 months i have redone my entire front end suspension with all MOOG Parts. This is another part I would highly recommend from them....plus you can't beat the price!

Great item, makes a difference

Very easy to install, took maybe 15-20m each side. I can feel the difference in road already after I did install, feels stiffer 👍🏽 and nice and tight when driving. I would recommend this for your hummer h2

Quality parts always

Well made product. Always used moog parts and requested when repairs are needed. Reasonably price. Comes ready for installation. There is some work involved to remove and make a repair to steering components. Moog quality products a must for me. Thank you.

Full Reviews