Features:

  • Package Dimensions: 5.25 L x 2.75 H x 3.31 W (inches)
  • Package Weight : 0.36 pounds
  • Country of Origin : China
  • Part Number: K7383
Easy and Quick fix for bad or worn bushings

These were a perfect fit on my 2005 Dodge Ram 1500 SLT 2WD V8. I put them in very hot water for 5 minutes just to soften them up a bit as they are a bit stiff when you're trying to open them at the split to get them around the sway bar. They're just what I was looking for. Start to finish was about 20 minutes including jacking up the vehicle. My best advice would be to loosen one side but not all the way. Then completely remove the bolts from the opposite end. Change bushings out and start screwing in the bolts until they catch. Then go ahead and do the same on the side you loosened earlier. Tighten all the bolts when you have finished with both sides. Tools required: socket set, razor knife (to cut out the old one if necessary), and perhaps a flat screwdriver to assist with removing the old bushing (mine were stuck from 10+ years of sitting there).

Fixed my clunk, added a grease zerk!

I will write a more complete review at another time, but these, along with a new set of sway bar links, solved my clunking problem. There is a comparison of these next to the greasable energy suspension bushings which are complete garbage and much too thin. Would highly recommend.

Perfect fit on 2005 Ram 1500 4x4 (Moog K7383)

This review is for the Moog K7383 Sway bar bushing kit. The blue kit fit perfect. They are slightly smaller than the OEM. But spread nicely when installed correctly onto the frame and torqued to the frame. They have a split center so they slide right over the sway bar and fit perfectly on to the bar and the holder will hold onto the polyurethane bushing while you get a bolt started to the frame. I stepped on the holder pressing the bushing onto the polyurethane bushing so that it would be in place while i got a bolt started. These fit perfect on a 2005 Ram 1500 4x4. Makes the front end get that new truck feel.

Excellent.

I actually bought these on mistake when deciding between Moog and Energy Suspension. Purchased both, and decided to keep these as a back up replacement because I am familiar with Moog quality, but not as much with Energy. Long story short, an end link from PartsW snapped at the joint and bore the holes out on the Energy brand due to loose sway bar. Just swapped then out today, and from what I can tell.. Moog's bushings seem to be out performing Energy's polyurethane. Don't get me wrong, they're both good brands.. but Moog, in my opinion, has proven to be superior for this particular product. I only regret not getting the Moog kit that comes with the grease fitted mounts.

Perfect fit on a 2008 Dodge Ram 1500 SLT Lone Star Edition 5.7l V8

These Moog sway bar bushings were an exact fit for my 2008 Dodge Ram 1500 SLT Lone Star Edition 5.7l V8 truck. About a 20 minute install time. Replaced original OEM bushings and they had to be cut off and then pried off. I prepped the surface, swaybar and bracket (cleaned and oiled with silicone spray). I sprayed some silicone on the new bushing and they slipped right on and slid into place. Great product at a great price!

Look to be a good product.

Bought these for a 2004 Dodge Durango. I also replaced the swaybar links shocks and upper and lower ball joints. Now have a nice firm rattle free ride. These were suggested by my mechanic who is a friend of mine. He said the moog was the best product for the money.

Made in USA and you can tell

Made my steering feel a bit tighter and I changed the out at the same time as my steering stabilizers so it was easy. These were cheaper and way better quality then the Chinese ones at my local parts store will buy again

Easy replacement for worn bushings.

These bushngs are easy to replace, and will help tighten up your front suspension. Be sure to measure the diameter of your sway bar before ordering so you get the size that firts! Took me about 15 minutes to replace. Replace them one at a time...... don't remove both brackets at the same time, or you might have a hard time getting the sway bar back in place!

excellent

Fit my 33mm '06 2500 Dodge perfectly. I put some grease on them to avoid the excess friction between the track bar and the bushings. Made a world of difference in how the truck responds. Highly recommended.

They work... and they fit!

What I like most? Hell of a lot cheaper than the part store wanted. LOL. The color is ugly.. but they work, fit like a glove. Not much else to say... they are perfect for what they are.

Full Reviews