Features:

  • Powerful, handheld pneumatic metal cutting shear cuts through aluminum (1.6mm) and steel (1.2mm)
  • Pistol grip provides comfortable use and the muffled exhaust reduces noise during operation
  • Ideal for cutting ferrous and non ferrous sheet metals, rubber and plastics without deformation of edges and can cut angles, squares, circles with ease
  • Connects easily to an air compressor with 3/8” hose size and 1/4" NPT inlet; includes planetary cage gearing for heavy-duty use for industrial or household work
  • Great for ductwork and auto body repair; blades are also easily replaceable
Great buy for my application.

Works better than expected. This was purchased to cut thin aluminum sheet, for trailer skin repairs. It does that very well. But I wanted to see if it would do thicker aluminum and I was pleasantly surprised.

Never bat your eyelashes at cutting hardware cloth again!

Laugh at the hardware cloth you need to cut! Your hands will never ache from the repetitive cutting with aviation snips! This tool is a must if you are cutting any hardware cloth. I can't believe I didn't know of this product previously.

Works for me

For all the types that are out there, at a wide variety of prices, this was the best price around. Two fixed blades and one active center blade give nice, smooth, almost burr-free, edges. I was not familiar with this type until I used this one. Be aware that, to give that nice clean cut, this shear produces a thin strip of waste between the two halves produced. You need to pay attention to the desired line and which side of that line you wish to use. This is a characteristic of the tool, not a fault or complaint. I arrived at this choice after some research. It compliments my air chisel set nicely. You can't get such a nice fine edge with a chisel. I'm happy and recommend this product.

Works great

Works as expected. Only had it 6 months, but oil it routinely and it's running wonderfully through 16g steel

I beat the beast.

First of all wear safety glasses and leather gloves. This worked well. I used it to cut up our pool. The only drawback is make sure you have a good quality air compressor. I have a craftsman one and I would need to let pressure build up during a cut.

Didn't know I needed it, until I tried it.

Recently had to cut some corrugated sheets for a rustic bath. Too thick to do by hand especially give the amount of cutting.. The Neiko is very easy to use - no need to practice. It does use some air - cfm and psi. I was able to make it work off my portable pancake cutting 30" at a time - no sweat.

Works great. Used it to cut 18ga steel

Works great. Used it to cut 18ga steel. Nice straight lines, easy to use. Seems to be very good quality.

Great for cutting pole barn steel

Cut a mile of ribbed sheet metal while building a barn. (At least 30 sheets but cross and rip cuts) Worked great and I was even able to cut up and over the ribs with some effort. Cuts the flats like butter even at the end of the job. Worth every penny.

Works

Does a good job, I use it for aluminum body panels for trailers. I use it a few times a week and never have any problems with it.

my new toy!

works GREAT! EASY TO MAKE STRAIT CUTS also clean cuts using it is fun on to my next project

Full Reviews