• Split design allows for easier installation.
  • Thermoplastic bushings are resistant to heat, wear, salt, road grime and oils.
  • 2 per box for complete installation.
  • Includes a Pair of Matching Bushings. Fits a 32mm bar only. Bushing has 2.15 Inch Width Across Face.

These worked perfectly in my 4x4 2003 F350. I never realized how much floating I had until I changed these out! Huge difference! If you're not sure if yours are bad get under the truck and try to move the sway bar side to side, if it moves side to side the bushings are bad. I replaced my sway bar links while I was at it as well! Will buy again when the time comes! In my pictures black is the old bushing and blue is the new.

I have a 2004 F250 SuperDuty Diesel 4x4. There was a rattle in the front suspension I was having a devil of a time tracking down. Replaced everything - still had the rattle. The old bushings did not rattle when inspected and didn't seem to move much, but I bought these anyway and replaced the old OEM ones - BAM! no more rattle. That was it.

Sway bar bushing were worn and had clunking noise coming from the front end (2004 F350). Went down to the local auto parts store and picked up a generic set of sway bar bushings. No change in front end noise. While doing some other work, noticed that the sway bar had movement. Ordered the MOOG bushings and installed them. No further movement, and noise is completely gone.

replaced with the old ones with these.. 2002 ford f250, V10. old ones looked OK, but had a clunking noise almost like a bad ball joint,, put these in .clunk gone truck drives and steers better, 200.000 miles on her running strong , recommend these, would purchase again

I had a dull thumping in my 2004 F-250 Powerstroke Crew Cab over every little bump. I upgraded to Rancho RS9000 Shocks and tried almost every level but the bump persisted. I took the old bushings off and they were a bit hard yet not distorted or worn out. Installed these new Moog bushings and took it for a test drive. The thumping went away instantly. I was really happily surprised by this. Easy 10 minute job with a 15mm socket/impact or wrench and they are split which makes install a breeze.

Install was easy, used silicone grease to make sure there will be no squeaking from the sway bar rubbing the bushings. I replaced my sway bar links at the same time, now the front end rides a lot better.

They will squeak at first but after driving for a week or two they will rub in and keep the front end stiff. Make sure to take a caliper and measure your bar to make sure that this will fit. The sway bar will have different thickness depending on the trim of your truck.

Perfect fit on the front of my 1999 F350 4 X 4 powerstroke diesel. Great upgrade from the factory suspension. Very tight front end now !

I love moog products and this one is no different. Took me five minutes to install and it fixed the clunk in the front end of my truck.

Fit perfectly. Make sure to measure your existing before ordering. Glad I read the reviews befor ordering because the first number that came up was smaller.