• 100% Polyester
  • Imported
  • TRUSTED: The original, patented mesh crib liner with millions sold since 2002
  • HELPS PREVENT ENTRAPMENT: Helps prevent arms and legs from getting stuck between crib slats. Easy Care: Secure all fabric fasteners before laundering to avoid snagging. Wash separately or with like colors. Only non-chlorine bleach when needed. Tumble dry low
  • BREATHABLE MESH: Made of lightweight, breathe-through mesh without any padding to restrict airflow
  • A.C.T. AIR CHANNEL TECHNOLOGY: Thin, layered construction allows for maximum airflow
  • SAFETY IS #1: Independently tested for safety, our top priority
  • ENDORSED BY DOCTORS: Designed so baby can easily breathe through it to promote safe sleep
  • TOXIN FREE: 100% polyester, contains no harmful chemicals, flame retardants or formaldehyde
  • EASY TO INSTALL: Smartly adjusts to fit four-sided slatted and solid-back cribs
  • SUGGESTED AGE: For babies up to 12 months of age
  • INCLUDES: 1 long panel (11”H x 111” L) and 1 short panel (11” H x 82” L)

IF- and that's a big if- you can read and follow directions, this product is perfect to keep baby's arms and legs in the crib and keep their head off the crib slats. I pressed it against my face when it was folded up 10 times and I could still easily breathe through it. It looks really nice, too. However- if you cannot or refuse to read and follow directions, it will be a hot mess.

I have done a lot of research on crib bumpers as i wasnt certain which one to get. This one caught my attention and after reading hundreds of positive reviews on mesh bumpers and how amazing and breathable they are I decided to give it a try. I have to agree with the previous review about how thick and breathable this crib bumper is. The print is very entertaining and just looks very cute. And most importantly once i put the bumper on a crib i never had to readjust. It just stays on place. My 4 months old can spend pretty good amount of time in the crib just looking at the animal prints around him. It also works very well with my Babyletto crib. I would definitely recommend this product over the regular padded crib bumpers.

I was hesitant to buy this bumper because we have a flat end crib (no slats) from IKEA. The reviews I read said that it was very difficult to install on a crib like that. I was very pleasantly surprised. It worked perfectly with our crib. It fits nice and tight. It took me less than five minutes to install both sides. There is a YouTube video that shows you how to do it. It's very simple though. The product is exactly as pictured. It is a thin mesh material. The gray is exactly like the picture. If you're looking for something that is thicker and has more padding you may want to buy the more deluxe version as this one is just a thin mesh, mostly just for keeping arms and legs from getting caught between the slats. This is exactly what I thought it would be. I am happy with my purchase.

This mesh bumper is way better than I expected. I feel like the picture doesn't do it justice. We ordered this for our 4 month old son who has gotten very active while sleeping and for the past few weeks has been waking in the night upset with hands, feet, even his face in the crib slats. When I pulled this from the packaging, I expected a thin barrier to simply block him from getting stuck. But this also has a nice, soft layer of padding much thicker than I would have guessed from the picture. I thought a mesh bumper would look unattractive with his crib bedding, but it's actually pretty cute. Our sheets, bed skirt, and crib are all from Pottery Barn and I actually love how this all looks together. My son is now sleeping better at night and doesn't wake up with red marks on his head or lodged awkwardly in the slats. He looks so cozy in there too. Just love this product!

Very happy I made this purchase. After constantly hearing battling information on whether to put a crib liner in baby's crib I decided to go with this mesh one and glad I did, he has moved himself into the edge at 6 weeks and I'm certain his little legs would have been hanging through the crib slats by now, he's a mover, and I don't have to worry if his face gets too near it to suffocate himself. Truly worth the purchase, forgo the cutesy quilted things that come with some crib sets, this is by far the safer product and they don't care about cutesy, at this stage they can't see it anyway. :-)

These crib liners were a Godsend! I had my first child when everyone was starting to lose their minds about crib bumpers being a possible cause of SIDS or suffocation. My very active baby liked to get her little chubby legs stuffed through the slats in her crib. She couldn't get them out on her own, so she would scream until I could get to her to get them out. Sometimes she had them jammed in so far that it took me a little bit. She was a wiggle worm. After 3 times of her getting her legs stuck though the slats, I started searching for something that would keep her from getting stuck, but wouldn't suffocate her if she rolled under them. This set of crib liners was perfect. The mesh is similar to a laundry bag, not big enough to get little fingers stuck in, but big enough to breathe though if she got her face stuck against them. I ordered them in pink, and the were a very pale shade of pink. They are washable, I always washed them on delicate. They lasted through both of my children, and were still good enough to take to the resale shop when my little one stopped using her crib.

We absolutely love this bumper! We just transitioned our 6 month old to his crib, and I knew I wanted a breathable bumper to keep his little limbs inside. The original bumper I had looked at was no longer available, but this one came up and we absolutely love it! It really was a cinch to install when following the easy to follow instructions provided, and I did it all by myself in less than 15 minutes. I have seen in some reviews comments on there still being gaps after installation. So I have to wonder if the instructions were followed correctly, or just how large their cribs are. Because our crib is standard size, the back fit perfectly, and the front piece was long enough I was able to go one slat farther than the instructions showed when trying to fit this as snug as possible. I also saw in a couple reviews the comment that this is not for all cribs. The product description states it is compatible with all 4-sided cribs. When you receive the product the packaging clearly states that it is NOT for 3-sided cribs attached to changing tables/dressers. I think it would be helpful if that bit of info was added to the description. When installing follow the instructions exactly and you should have no problems, and don't be afraid to tug the ends and really pull on them to tighten up the liner. If you follow the instructions and get the liner nice and tight around all corners you should have no problems with this at all. The only downside for us is that our crib has one wide section at the back side so the center tie for the back obviously will not fit it. I simply ensured I pulled the liner as snug as I could before sealing the velcro to keep it taut at the back, and so far it is standing fast.

Exactly what I needed for peace of mind! Baby started getting his leg stuck in the crib rails but I was deathly afraid of bumpers. Well fear no more mama, these liners are totally breathable! And I thought I'd be able to install without watching any videos- WRONG. Just go to their website and watch the 3 minute video and installation will be a breeze. Also, you can still change the seats without having to touch the bumpers which is a blessing! Others have said that there's not padding... well this is true but padding wasn't my concern. Safety was my concern and now my child wont get stuck or smothered in his crib.

We couldn’t be happier with this liner. We didn’t transition our daughter to her crib from her halo bassinest until after 6 months. Once we did, she seemed to get a hand or foot between the slats often. Our nursery has gray walls, a white crib, and pink accents so I ordered this hoping for a pleasant match. Sometimes the colors in these online products can be off putting when you see it in person. Not the case here! It is a perfect match. The gray is a beautiful true gray, the pink is soft and beautiful, and the white is perfect. This also isn’t an old school bumper that you just tie off to the slats. It’s a two piece bumper. You place the longer piece against the back of the crib and follow the directions to thread through in certain places then secure with very strong Velcro and finish off with ties. The second piece is shorter and goes along the front in a similar fashion. It leaves no gaps and my little one hasn’t had any more slips between the slats. I was a little intimidated when I originally removed it from the package because their were no directions included but the company directs you to their website where there is a great video tutorial (which is a big plus for mommy brain!). I’ve washed the liner once and it held up great. We use it with the Graco Rory convertible crib and it’s a perfect fit. I don’t worry that my daughter will step on the liner and use it as leverage to step out of the crib. The liner slides down from the top if she tries to step on it but it still maintains a barrier from allowing her feet and hands to slide out. She likes to pull it down a little bit to peak out when she should be sleeping! She also loves the animals printed around bumper. They are beautiful and friendly looking and she loves laying in bed and cooing to the animals! If you found this review helpful, please click the helpful button 😉

These saved us. After my daughter learned to roll she would roll around her crib at night and get a leg stuck in her crib rails. Sometimes she would get herself into painful positions. I needed something to block the rails that did not pose a risk for suffocation. The mesh is soft and allows air to pass through. These allowed my daughter to sleep peacefully. Before these we would wake up to her crying stuck in the rails. These only took about 5 minutes to install. The directions where very clear and installation was a breeze. These liners are speficically made for a crib with solid ends. The ends are Velcro and customize to fit any crib with solid ends. The fit is tight, safe, and it stays on. The look is neat and tidy.