Features:

  • DUAL IN-LINE VALVES: Controls water flow for 2 sprinkler lines.
  • QUICK SETUP: Easily installs in just minutes.
  • NO TOOLS REQUIRED: Hand tighten installation is all you need.
  • MULTI-SYSTEM: Works with PVC and poly pipe systems; adapters for 3/4-inch and 1-inch PVC pipe included.
  • COMPATIBLE DESIGN: Works with most existing sprinkler systems.
  • Unit has 2 valves
  • Installs in minutes
  • Hand tighten; no tools required
  • Works with pvc and poly pipe systems; adapters for 3/4" and 1" pvc pipe included
  • Works with most existing sprinkler systems
Bought this for my DIY sprinkler system. Very easy to use!

I installed my own system this spring. While it was a ton of work, I'm glad I did it! I did a bunch of research and I settled on Orbit because of their reputation for quality products. These pieces are all very easy to install and work together seamlessly.

The best for serious irrigation

I mounted two of these together and retrofitted an indexing valve. Much better control of each zone.

Fast, clean, and with simple future valve replacement

I used four 2-valve units to create two valve boxes each with four valves. The 57250 made for a neat and easy tool-less and largely glue-less valve assembly. Very clean installation with simple future maintenance since the valves are easily replaced (between unions). I used Orbit Valve Box Bases with NDS 113BC boxes which fit perfectly into the bases (the Orbit 53212 boxes did not fit properly).

Welll..it does say, "Patent Pending"

Because of root damage from my one of my neighbors' trees, I had to replace my sprinkler lines. I have always used a competitor brand for my sprinkler valves, but when I came across this manifold system, it looked exactly what I had envisioned doing with a series of valves. I didn't want them in the ground because...wellll ok, I am old and I have sciatica, and I didn't want to bend down any more than I have to, so I wall mounted. I would have had to purchase and install 5 new valves anyway, so I ordered this product, and also Orbit 57250 2-Valve Heavy Duty Preassembled Manifold to add to this one, so I would have 5. The simplicity of the removal of an occasional bad valve, would be much more simplified. Uttt ohhhhh....maybe it was just a bit TOO simplified?? I followed the manufacturer's instructions to a Tee. I did hand-tighten all of the fittings, per instructions, and to the credit of the manufacturer, I had no leaks on the hand tightening. My water pressure is no where near the 80psi that they say to avoid. Soooo.. I am attaching a few photos here, that show leaks...but not where you hand tighten. If you zoom in, you will see a couple of the valve bodies leaking, but in all honesty, all 5 do. The ones not showing as well in the photos, are on the back side. These are from the manufactured body, and there was no way I was going to try tightening those using my Channel Locks, or anything else, and then have the manufacturer tell me that I violated the product warranty. So, for now, I am not returning them. Why not? Because I have no guarantee that the next 5 will be any different than these 5 were, and it is just another job this old man doesn't need to keep playing with. If the leaks worsen before my return deadline, then I may return. But of course, I will go back to the previous manufacturer, and have to try to adapt what they have, to my installation. Just more work than I wanted to put into this project. Bottom line?? I won't be using this manufacturer's products again. And the circle keeps going round and round. LOL...

High quality components

Extremely flexible components for building a complete unlimited sprinkler valve system. Rugged and no leaking. I built a seven valve station to replace my old existing valve station ( Could not find any parts to fix my old system) Enclosed the design into a box lined with 3/4 and 1.5" of Styrofoam

This is my second set to extend the current system ...

This is my second set to extend the current system. Works as expected. I remember the last one i ordered i got also 3 of the barbed "Orbit 57188 3/4-Inch Manifold Poly Adapter, Green", not this time. Maybe it's a different version.

Easy peazy

Hasn't seen water yet but installation was easy and it was very easy to add a valve

Product works as stated.

Exactly as previewed. Just be smart and tighten all connections and the manifold should work with no problems. I installed, tested, and have not had a problem with this product. Very pleased!

Much better than trying to piece something together!

Would have liked to get it cheaper but it was still much better than trying to piece things together. This is a solid product giving no issues at all.

Makes install super easy and worth every penny.

Very impressed with this. I had built my own previously out of PVC and valves but the installation of this was so easy it makes it worth the price. I used the poly adapters so being able to connect those to the sprinkler lines first, then being able to screw in the manifold made installation extremely easy. I had a set of three and a set of two that I hooked together. I definitely would recommend these!

Full Reviews