Features:

  • Series 300 stainless steel band helps provide resistance to corrosion in marine environments
  • Stainless steel screw resists corrosion
  • Miniature size for small hoses installed in confined spaces
  • Band width of 5/16” better fits small hoses than larger widths
QUALITY PRODUCT

have already started using these hose clamps. I have been working a lot with replacing, setting up and reinstalling an electric air compressor in my shop. I have also been doing a lot of work with pressurized garden sprayers and specialized spraying equipment. Many of the parts and accessories I have been using come from a local Tractor Supply Company. I was horrified one day when I went to use on of the forty-pack of assorted hose clamps that I purchased from Tractor Supply's "discount table". I can not imagine how angry I would be if I was really relying on those clamps to get me out of a serious breakdown situation. The "forty-pack" turned out to be garbage. Whenever a moderate amount of torque was applied to the hose clamp it failed. The band twisted and broke. The screw tore right through the soft metal of the hose clamp banding material. This was truly awful. I wrote the company and explained how shoddy the quality was. I have since seen similar reviews on "discounted" forty-pack hose clamps in other stores. At least I know now to stay away from any of that bargain basement junk especially when it comes to an item that I might really truly be relying on to get me out of trouble. I said all of that as a comparison to these high quality hose clamps that I have purchased from this seller. They are top shelf products and I have successfully used them in high pressure air hoses and high pressure water hoses. All repairs are doing well.

A quality stainless steel clamp...

This is a quality stainless steel hose clamp. It operates smoothly and clamps evenly. As typical of clamps of this size, it takes a 1/4" nut driver or a flat blade screwdriver to operate the screw. I purchased this clamp to use with a low pressure air pump I use with my hydroponic systems. It will be used outside, and this clamp will serve this use well. ***I have two sizes of these clamps and I have noticed that they will start to go out of round when tightened to their lower ranges. This has caused leaks for me at pressures around 25 psi. I resolved this issue by selecting a size that I do not have to tighten as much to get the fit I need. Overall, I was satisfied with my purchase and I would recommend them to others...

Tightened perfectly

Maybe I could have gotten a variety pack for the price, but these are a nice solid design. None of the slippage you can see in cheep clamps as you start to tighten them down firmly. Exactly the kind of solid feel I wanted on my transmission hoses.

Great price for marine application on the outside of my ...

Great price for marine application on the outside of my boat motor when the plastic cinch disintegrated in the sun on the flush port of my Yamaha.. Good fit and hopefully the stainless will hold up in the salt. If not, I have 9 more to replace it with. Back on the water. Thanks, Amazon.

Yep, they're REAL stainless steel

I subjected these hose clamps to a magnet that could suck chrome off a bumper hitch and they didn't even think about sticking. No part of the clamp would stick even in the slightest. They should remain free of rust or tarnish even in the harshest conditions, including saltwater.

Excellently Designed Clamp - A Definite Keeper & All Around Win For Amazon!

Reviewing the smaller sizes, with 1/4" screw size "mini clamp" ~ unlike many of the 1/4" drive "mini" clamps, these are really tough and superior in quality, strength and sealing capabilities. HIGHLY RECOMMEND! No reason to suspect the larger ones would be any less in excellence of craftsmanship. These can handle that "extra turn" to bring an end to the all too common dribbling hose or hissing air realized when using many of the Chinese and other imported clamps. Well worth the cost for a clamp that seals and STAYS sealed. No side tracking, slipping, stripping or jumping in the worm drive when cranking out that necessary extra turn. Another WIN! for Amazon!

Not for fuel line

Too big for fuel lines despite the description

Finally a hose clamp that is ALL stainless, not just the band

These hose clamps are the real deal. They are all stainless as advertised and seem reasonably strong (much better than the auto parts value packs that aren't even all stainless) If you have a boat and it needs hose clamps and you don't want them to rust, these are it. The 7/32 size are perfect for a 5/16 inch inner diameter rubber fuel hose (or would also fit a 1/4 inch inner diameter rubber fuel hose pretty well)

Handy for keezers

I use this to clamp down beverage and gas tubing in my keezer. This is the perfect size for that application. For the price, I don't think you'll find a cheaper alternative. I do like the plastic clamps that slide apart on demand though. Still, the worm clamps work. Just be careful not to over-tighten (you'll know this has happened if you see tubing pushing out through the little slots in the band). I've severed/damaged tubing that way before and I've since found that it doesn't need to be *that* tight in order to stick.

Great Hose Clamps -- Purchased to attach a basket to my bicycle rack

The Precision Brand M4S Micro Seal, Miniature All Stainless Worm Gear Hose Clamp, is well made and is aligned with the quality that you would expect for the price of this product. The quality across the ten hose clamps contained in this order was consistent. There are no obvious sharp edges. This item arrived in a small (but appropriately sized) box, packaged within an evelope, the packing seems to be good enough to priotect the product. I intend using these hose clamps to fasten a cargo basket (Wald 582 Rear Folding Bicycle Basket (12.75 x 7.25 x 8.5, Silver) to my Specialized Sirrus bicycle, to the rear mounted Planet Bike Eco Rack Oversized 6061 T6 Aluminum Bike Rack with Pre-installed Hardware (Black). I purchased this product myself with no discount, I will update if these hose clamps have any issues with failing in the application that I intend to use them for.

Full Reviews