It's an inner tube, I stuck it inside the snowblowers tire got the tire back on its rim, (that took some time with a couple of screwdrivers and a few choice words) then I installed some free air into the valve stem, at this point I realized I was done so I went into the house, made a ham sandwich, got a beer, and watched three reruns of kojak, Telly Savalas is awesome, "Who Loves Ya Baby".
After about ten years, the tire on my two wheeler popped. This tube fit my dolly and it holds air. So far so good after a few months of occasional use. Just make sure you get the right tube to fit your equipment. My other dolly tire went flat last week, so I will be buying another.
Did the trick, exactly what I needed. I ran over a carpet staple with my moving dolly, and of course completely wrecked the inner tube right when I needed to move all of my brand new appliances. This saved the day and allowed me to get up and running in just a few minutes and get my appliances unloaded off the trailer and into the house. it seems to be of excellent quality, packaged well, and arrived quickly. I'm not sure what more I can say about an inner tube... except that I'm definitely going to order a few more to have some extra backups....
The inner tube was an identical perfect replacement for a tube in my hand truck tire that after 18 years had the joint between the stem and the tube deteriorate until it wouldn't hold air. The Marathon tube appears to be high quality and because it was identical in its design, fit in the tire and on the rim with perfect alignment (the stem). The price was competitive. Delivery was fast.
My first time to replace a tube in a dolly wheel. For some reason the valve stem in angled which made installation a bit more difficult than it would have been otherwise. But the angle may be necessary to make the stem accessible for inflation. Nevertheless, installed easily, and several days later it is still holding air.
Perfect for my use to convert my tubeless tire to include a tube. The tubeless tire would not seal to the rim on my Leaf Shredder/Chipper, this elimantes that issue. One thing to be aware of is that the stem is not straight it has a bend/curve in it, if you look at the picture you can see it. This was not an issue for me. The installation was not easy for me so I took the rim, tire and tube to an auto tire center and for $8 they installed it, well worth the money. The price for the tube and the delivery was great.
Inner tube worked well. Struggled trying to remove tire from rim until i found the dolly rim was split and could be unbolted and tube replaced easily. Check before you struggle like I did for 5 minutes. Went quick once I figured that out.
Looked all over for an answer to my problem. Usually don't read other people's comments but this time I am so glad I did, The inner tubes are great, purchased extra just in case because I don't want to have to be frustrated by not finding them for this specific size for o.e of my dollies.
Tested with air in water filled sink to check before installing, held air fine. I installed in 9" scooter tire just fine. The tube was actually 9 3/4 inch diameter when inflated not in tire. Hoping that it not being stretched too much will help it last. Easy to replace with split rim on scooter. The valve stem was bent at about 50* angle, really needed 90* but it works with a valve stem extender. Make sure to put talc in tire before tube,and check for any sharp items or dirt before mounting!
Heather Reed
Telly Savalas is awesome, "Who Loves Ya Baby"
It's an inner tube, I stuck it inside the snowblowers tire got the tire back on its rim, (that took some time with a couple of screwdrivers and a few choice words) then I installed some free air into the valve stem, at this point I realized I was done so I went into the house, made a ham sandwich, got a beer, and watched three reruns of kojak, Telly Savalas is awesome, "Who Loves Ya Baby".
Hilario Castrejon
So far so good after a few months
After about ten years, the tire on my two wheeler popped. This tube fit my dolly and it holds air. So far so good after a few months of occasional use. Just make sure you get the right tube to fit your equipment. My other dolly tire went flat last week, so I will be buying another.
Fozia Amjad
it seems to be of excellent quality, packaged well
Did the trick, exactly what I needed. I ran over a carpet staple with my moving dolly, and of course completely wrecked the inner tube right when I needed to move all of my brand new appliances. This saved the day and allowed me to get up and running in just a few minutes and get my appliances unloaded off the trailer and into the house. it seems to be of excellent quality, packaged well, and arrived quickly. I'm not sure what more I can say about an inner tube... except that I'm definitely going to order a few more to have some extra backups....
Regina Lehnen
The inner tube was an identical perfect replacement for a tube in my hand truck tire ...
The inner tube was an identical perfect replacement for a tube in my hand truck tire that after 18 years had the joint between the stem and the tube deteriorate until it wouldn't hold air. The Marathon tube appears to be high quality and because it was identical in its design, fit in the tire and on the rim with perfect alignment (the stem). The price was competitive. Delivery was fast.
Jeromy Rillstone
worked like a champ
My first time to replace a tube in a dolly wheel. For some reason the valve stem in angled which made installation a bit more difficult than it would have been otherwise. But the angle may be necessary to make the stem accessible for inflation. Nevertheless, installed easily, and several days later it is still holding air.
Yatish Kakade
Perfect Tube for replacement or to convert from tubeless to tube
Perfect for my use to convert my tubeless tire to include a tube. The tubeless tire would not seal to the rim on my Leaf Shredder/Chipper, this elimantes that issue. One thing to be aware of is that the stem is not straight it has a bend/curve in it, if you look at the picture you can see it. This was not an issue for me. The installation was not easy for me so I took the rim, tire and tube to an auto tire center and for $8 they installed it, well worth the money. The price for the tube and the delivery was great.
Doods Jet Cunanan
Flat no More.
Inner tube worked well. Struggled trying to remove tire from rim until i found the dolly rim was split and could be unbolted and tube replaced easily. Check before you struggle like I did for 5 minutes. Went quick once I figured that out.
Rodica Liliana
Extremely happy.
Looked all over for an answer to my problem. Usually don't read other people's comments but this time I am so glad I did, The inner tubes are great, purchased extra just in case because I don't want to have to be frustrated by not finding them for this specific size for o.e of my dollies.
Toni Sandell
works perfect
seems to be a high quality tube. way better than the stock one it replaced. it has held the same pressure for over a month now. no complaints at all.
Rebecca Carothers
Fits in 9 inch scooter tire fine. Actual OD was 9 3/4 inch with air in tube. 50* valve
Tested with air in water filled sink to check before installing, held air fine. I installed in 9" scooter tire just fine. The tube was actually 9 3/4 inch diameter when inflated not in tire. Hoping that it not being stretched too much will help it last. Easy to replace with split rim on scooter. The valve stem was bent at about 50* angle, really needed 90* but it works with a valve stem extender. Make sure to put talc in tire before tube,and check for any sharp items or dirt before mounting!