• Metal handles in Pewter finish
  • Features 2 open storage spaces divided by 1 adjustable shelf that can support up to 15 lb
  • Cut out hole in the back panel which allows for easy wire management
  • Made in North America with non-toxic laminated particleboard
  • Accessories not included, 5-year quality guarantee

Just built the desk tonight. Really not that hard to put together, although I am very handy. Only problem is that I didn't realize until half way through that the top of the desk had a surface crack across one side. I decided to finish it and see if I can get a replacement from the manufacturer. I will update with results. Really not a bad desk for the price. The design is great, but the material is cheap. It's pressed wood with a very thin veneer. I've had items made of similar material and I know they don't last. But, for the price it's ok. If they send me a replacement top I'll be happy. ASSEMBLY TIP: lay out the pieces like they show in step 1 and it's much easier to put together. UPDATE: Emailed South Shore customer service this morning. Here is the customer service email: South Shore Service This afternoon received a response that they are sending me a new desktop. They're also sending me the studs to connect to the base. Very happy with service. Great company with fast response to service requests. 2nd update 8-16-16: Installed new desktop. Very easy to replace. Arrived in perfect condition, packed very well with wood all around it.

I was skeptical at first because I saw that everyone had bought this for their kids so I thought maybe it'd be too small or not sturdy. It's been a few months and I am completely obsessed with my desk. It's the perfect size for my smaller room and I still don't feel like it's tiny and cluttered. I have a laptop so I used the slide out tray to organize office supplies in an acrylic organizer as well as a paper tray with important documents. I was able to assemble this with my older sister. I wouldn't say the assembly was a very sturdy one due to no actual screws or hammers holding the desk together but it held up even in the process of transferring it to my bedroom. As a college student looking for something affordable yet valuable, I definitely hit the jackpot. UPDATE 3/01/18: This desk is still holding up! It has gone through college finals weeks where I have packed on the textbooks and used it nonstop. The only thing that bothers me about this desk is the sharp edges that start to bother your forearms after leaning on it for a while (while writing, typing, etc.) other than that, I still rate it 5 stars.

Package arrived in perfect condition. This desk took about 2 hours to put together by myself (my husband tightened a couple screws that he thought were loose and also gave input on which way a few pieces should be put together, but that was it). Unfortunately a lot of pieces were not marked and I had to make an educated guess on what piece was which based on the shape, size and matching if the holes on the diagram matched the ones on the boards, but it wasn’t too bad. One minor complaint is that when the desk is put together, the drawer doesn’t sit completely perfectly in the space—it’s ever so slightly crooked. It does not impact the use of the drawer or anything, but if you are kind of OCD this might bother you a bit. One thing to note is the back piece that covers the shelf section doesn’t fit over the entire back which confused me, but this is on purpose to fit wires instead of holes in the backing. If you look at the picture of the desk, you can see the left side is not covered. Other than that minor drawer aesthetic it’s a great desk for $99 so far and very pleased with it.

Awesome. Its very hard to find an affordable computer desk that isnt just a flat table these days. Package is pretty heavy, and if you live on a 2nd floor appt like me, you may need a hand to get it up the steps. Came on time, completely undamaged. Not even a scratch. I was worried based on some other reviews I read, but I guess I was lucky. The instructions are just pictures, but if you simply read them over once before starting assembly, and seperate pieces and parts accordingly, Its actually really easy. All my parts were labeled correctly, just double check everything step by step as you go, as some of the letters and numbers do look similar. You can do it yourself, but I'd highly suggest a second set of hands to help with holding piece in place as you attach them to one another in the first few steps. Funny enough, they even state to grab a friend, and put on music before beginning assembly haha. If you have a basic sense of 3D "front and back, left and right", and a screwdriver you are set. I would NOT suggest using a drill, as the connectors are designed to be inserted, and locked into place by location, not strength necessarily. All the holes were pre-drilled and lined up perfectly, and the kit came with exactly the parts, and color specified. If you dont double check the details in the instruction pictures, its easy to flip some parts around as they are not labeled front and back, as well as sizes of specific connector materials as they are the same type and color, with different diameters. So make sure you get it right the first time, as its a pain to attempt to re-do. [I had to re-do a piece of the top shelf, and it was tough to do w/o breaking the connector.] Took me and my roomate less than an hour to assemble. My half tower fits perfectly in the base, BUT without the open shelf. I had to remove it. I have the drawer above, then tower immediately below. A full tower would NOT fit, and a mini tower, or laptop would be fine. There are spaces built into the back of the desk for wiring which is really nice, and helps with airflow and cooling. The height is also very nice, as long as you have an adjustable computer chair. Its fits both of my 21in monitors on the top shelf beautifully, with the roll out keyboard shelf being a life saver. [only 1 monitor in pic, Im repairing the other currently.] Computer speakers get a little boost if placed between the main top piece of the desk, and shelving piece. If you need something affordable and functional, go for it. It can support at least 130 lbs of weight when assembled, as I have stood on it multiple times already to get to the ceiling above, and wall behind for decorating, so no worries of flimsyness or collapsing.

Love this desk!! It was in perfect condition, and easy to assemble. The thing that really struck me was one particular page in the instruction booklet. I enjoyed it so much, I posted it on my Facebook page with your company information and a copy of the diagram. See below: "So, I bought a new desk online manufactured by a company called South Shore. The first page of the very detailed instructions on assembly is probably one of the most original diagrams I've ever seen. It made me smile. I'm not sure if you can see well enough from the image, but it starts out with 2 people. As you follow the path, you see you need a screwdriver, a hammer, you need to place the pieces on a rug to protect the surface, and finally, you need to CRANK SOME MUSIC!!! Love it!!! It's like they knew that's exactly how we ALWAYS assemble furniture at our house..." I am VERY impressed with your company and will definitely order form you again!!!

I don't think i have ever found such an excellent buy for such an amazing price! First when the package arrived, i was skeptical if i would be able to put this together by myself(i am a single mom) But the instructions and the parts were so very well detailed that i was able to fix it in 2hrs just with a hand screwdriver and a hammer. The quality of the product is very good and i must say it exceeded my expectations. Its perfect size for your personal desk space. See pictures for an idea.

I bought this desk in black for my son's room; he is 11 (5 ft 7 - 132 lbs). He fits this desk, even though it is considered smaller. He loves it because he feels special to have his own work area in his room. I assembled it myself (I am his mom) without any difficulty. It says you need 2 people to assemble, but you do not. Directions: you kind of have to guide your way through these assembly instructions because they are not completely accurate. Just use your head and you'll be alright. It took me almost 2 hours to assemble-but my son is worth the time. The parts are all labeled with "A" "B" G" etc…. The back panel was too small for desk, (wrong part) but I can do without it since it's against a wall. PERFECT for dorms, small spaces etc.. The drawer and keyboard tray slide without effort and has a great, smooth glide. You won't be disappointed. Have a great day!

shorter than i thought it would be but it definitely works. glad i didn't buy the chair yet so i know what to look for now. all but one of the rails came bent and amazon refunded me for keeping a damaged product but they would have helped me get new rails if i hadn't needed the desk right away. they straightened out enough to be functional when i screwed them down tight. easy enough to put together alone. i did it in about an hour. getting it out of the packaging is kinda tough and i had help but if you give it some grit you can do it. the drawer isn't white on the inside so that threw me off but it all looks good and isn't obnoxious. picture included just so it doesn't catch anyone else offguard. also the middle piece shown on the hutch portion doesn't quite touch the top of the desk. i would have secured that with a cam lock if i could have. all the pieces are covered in sawdust as pictured, so i recommend wiping it all down after putting it together. that shouldn't prevent you from buying it. overall a really great desk for the price and quite attractive for pressboard. thought about docking a star for the minor issues but honestly i'm very happy with this desk. i wanted something cheap and functional and this is exactly that.

Great desk! It looks fantastic and was very easy to assemble. Did arrive with a few scratches and scrapes but not a big deal for me. The size was perfect for what I needed

The box had seen better days when it arrived, but everything inside was perfect. (one or two little chips doesn't bother me) I thought it was going to be a chore to put this together alone, but it only took me 2 hours! Very simple instructions, a screwdriver and hammer are only tools needed. It's perfect for my needs and I love it.