Features:

  • Interior Dimensions L9.4" x W7.4" x H5.5" | Exterior Dimensions L12.5" x W10.1" x H6.0" | Includes 1 layer cubed foam insert with base pad and lid foam
  • Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling
  • NK-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey
  • Two Powerclaw (patented) triple action latches molded in super-tough Nylon keep the case securely closed using compressive force
  • Limited lifetime warranty on NANUK 905 case |1 year warranty against manufacturing defects on the foam inserts
  • High quality polyurethane foam, the multi-layered set of customizable inserts includes a pre-scored removable layer. This layer consists of foam squares that can be removed in various configurations to accommodate the contents of the case.
  • Interior Dimensions NANUK 905 Case L 9.4 x W 7.4 x H 5.5
  • Waterproof Seal- Automatic Pressure Release Valve-100% Stainless Steel Hardware-Stackable
  • PowerClaw Latching System- Clamps the case tightly closed using compressive force while the integrated slide lock prevents the case from opening during transport or when dropped.
  • Soft Grip Foldable Handle and integrated Hardware for an Accessory Strap and Padlock (Lock and Strap Available Separately) . The handle structure is molded with NK-7 resin.
Love this box

Right, it doesn't have a front latch but doesn't need one. This box is solid and beautiful. I wanted something dependable waterproof was a MUST to carry electronics in my kayak. No regrets here.

The case did a great job protecting my camera

I got this case to hold my camera on bicycle camping trips. I put the camera in the case, put that in my duffel bag, and it got tossed in the back of a truck every day for a week. The case did a great job protecting my camera! The perforated foam is easy to customize to fit whatever you want to protect. Highly recommended!

You too could throw this down the stairs on a drunken bet.

This case is amazing, evey time I open it I feel like some sort of secret agent. I bought this to put my portable projector in and not hurt it on my travels. It came with some break-away foam which made it easy to accomodate my projector and all the accoutrements. I even through this case down the stairs on a drunken bet, no scratches to the case at all and no issues with any of my equipment.

It survived 8 days of class IV+ white water with a Dslr camera inside it. Not a scratch or drop of water.

This is the best watertight box I have ever used. I use this to hold my Nikon d610 with an extra lens when I go white water kayaking. I bought the box specifically to protect my camera when on remote rivers running class IV and V Rapids in a kayak. I couldn't be happier. The box fit in my kayak's seat with me. Kept everything dry and from banging around. I would buy Nanuk boxes again and again.

Best case I've owned

My roommate owned some Pelican and they are top of the line. I own Nanuks. They fell more sturdy and the latch handles are more secure and easier to operate than Pelican. Whenever I open a Pelican I feel like I'm going to break a finger nail or scratch myself because it is too hard to pull up on the latches. With Nanuk, it locks tight, but there is another easier safety release that you push, making the latch very easy to release. I feel like a child can safely latch and unlatch Nanucks, but not Pelican. I often have to slap the latch of Pelicans in order to latch them close. I never have to do that with Nanuks. I have also dropped this case with my camera and lenses in it and they are perfectly fine.

Perfect fit for my project

We decided to go with this case for a special project where we needed a hard protective case that we could install an inside face plate for an electronic controller. These cases are pre-designed with an inner lip that is designed for mounting a panel. The lip even has screw holes so installation of our control panel is very easy. We tried other well-known cases but we had to secure the faceplate with screws or rivets coming in from the side of the case, compromising its water resistance. These Nanuk cases are built extremely well (even better in our opinion than the "p" brand), the handle is more robust, and the double-action side latches give it the more futuristic look that we desired. Also you can open the latches and fold them all the way open and they "lock" out of the way until you release them. Nice feature if you want the latches to stay out of your way, which we did. Well-priced, well-built, well-designed and the color options are great. Note that this case does NOT come with the foam inserts, so if you're expecting those you will need to choose a different part number that has the foam.

Perfect fit for my project

We decided to go with this case for a special project where we needed a hard protective case that we could install an inside face plate for an electronic controller. These cases are pre-designed with an inner lip that is designed for mounting a panel. The lip even has screw holes so installation of our control panel is very easy. We tried other well-known cases but we had to secure the faceplate with screws or rivets coming in from the side of the case, compromising its water resistance. These Nanuk cases are built extremely well (even better in our opinion than the "p" brand), the handle is more robust, and the double-action side latches give it the more futuristic look that we desired. Also you can open the latches and fold them all the way open and they "lock" out of the way until you release them. Nice feature if you want the latches to stay out of your way, which we did. Well-priced, well-built, well-designed and the color options are great. Note that this case does NOT come with the foam inserts, so if you're expecting those you will need to choose a different part number that has the foam.

Perfect fit for my project

We decided to go with this case for a special project where we needed a hard protective case that we could install an inside face plate for an electronic controller. These cases are pre-designed with an inner lip that is designed for mounting a panel. The lip even has screw holes so installation of our control panel is very easy. We tried other well-known cases but we had to secure the faceplate with screws or rivets coming in from the side of the case, compromising its water resistance. These Nanuk cases are built extremely well (even better in our opinion than the "p" brand), the handle is more robust, and the double-action side latches give it the more futuristic look that we desired. Also you can open the latches and fold them all the way open and they "lock" out of the way until you release them. Nice feature if you want the latches to stay out of your way, which we did. Well-priced, well-built, well-designed and the color options are great. Note that this case does NOT come with the foam inserts, so if you're expecting those you will need to choose a different part number that has the foam.

Perfect fit for my project

We decided to go with this case for a special project where we needed a hard protective case that we could install an inside face plate for an electronic controller. These cases are pre-designed with an inner lip that is designed for mounting a panel. The lip even has screw holes so installation of our control panel is very easy. We tried other well-known cases but we had to secure the faceplate with screws or rivets coming in from the side of the case, compromising its water resistance. These Nanuk cases are built extremely well (even better in our opinion than the "p" brand), the handle is more robust, and the double-action side latches give it the more futuristic look that we desired. Also you can open the latches and fold them all the way open and they "lock" out of the way until you release them. Nice feature if you want the latches to stay out of your way, which we did. Well-priced, well-built, well-designed and the color options are great. Note that this case does NOT come with the foam inserts, so if you're expecting those you will need to choose a different part number that has the foam.

Solid case with solid latches

You know when the latches are in place. The case stays together tightly and securely. The foam was a little more difficult to cut out than I expected but it works well.

Full Reviews