Features:

  • Split design allows for easier installation
  • Replacement can reduce front end noise
  • Restores like-new steering and handling
  • Bushings are engineered to provide long life and dependability
  • Incorporates proven design and engineering features
  • Inner sleeve is phosphate coated for corrosion protection
Great bushings. They are MUCH larger than the originals

Great bushings. They are MUCH larger than the originals. At first, I thought they sent me the wrong ones, but after researching the install I learned you must move the retaining clips on the sway bar in about a quarter of an inch. I used a 4lb mini sledgehammer and it took prominently 2 seconds per side. I installed the bushings on the sway bar with the cut in them facing down, sat the sway bar on jack stands and then started the bottom bolt, followed by the top bolt on one side than repeated on the other. I still did not think they were going to fit but tightened them all down and it fit like a glove! TLDR; They will look too big but they will fit with some minor adjustments

Super cheap, 20 minute job to swap out and ...

This is the first step to try when throwing parts at front end noises in the 300. Super cheap, 20 minute job to swap out and in my case, solved my clunking front end.

Fixed the "Clunking" on my 2010 Dodge Charger SXT.

Drove around for a long time trying to figure out what the cause of the clunking sound was every time I went over any kind of bump in the road. Pep Boys told me I needed new shocks for $1300.00. I changed out my outer tie rod ends, changed out the sway bar links, but what finally did the trick was these sway bar bushings for 6 bucks.

Perfect

Make sure you measure your sway bar befor purchase , found out there’s 3 different sizes for my srt ! Return was easy ,quick response and sent me the correct one.. thanks

Awesome!

It u have a clunk in your front end look no further. This and sway bar links did the trick. Not even sure I really neeeded the sway bar links. The bushings I replaced were squished pretty good. These new ones solved the clink.

Great product great value..

Great product..Dont forget to move the factory bushing holder over about a quarter inch to accommodate the larger bushing..But this was a much needed upgrade..

Great buy

These things worked great. Got rid of the clunking noise from my front end, steering is tighter and ride is better. Highly recommended.

No more clunking from the sway bar

What a bargain, got rid of the annoying clunking noise on my sons Chrysler 300

Easy install!

Fits well on sway bar just had to push back retainer rings on inside of bar about 1/4”. Specified on instructions if applicable.

clanging stopped in my car

these were easy to install and boy did they make my ride better.

Full Reviews