• Professional Quality Haze Fluid from Froggy's Fog - The manufacturer that focuses on customer satisfaction and outstanding products.
  • Produces amazing haze in the Hurricane Haze 1D, Hurricane Haze 2D and Huricane Haze 4D
  • High Output, Long lasting, Remains clean, dry, and odorless
  • Water Based Leaves little to no residue or contamination
  • Designed for use with any water based Haze Machine - Froggys uses De-Ionized Water and Pharmaceutical Grade Chemicals in the fomulations of its fluids.

I recently purchased a Marq Haze 800 DMX hazer. I had been using a small fog machine for some time but this is my first hazer and I wasn't sure what brand to go with so I bought the Beam Splitter haze juice based on the reviews here on Amazon and used it for a show a couple days later. I was very pleased with the hang time and my drummer commented that it was not bothering him at all, breathing wise (it was aimed into the corner near him to most evenly fill out the stage with haze). While I can't speak for any other brand at this point as this is the only one I've tried, I CAN say this worked really well and I would recommend to anyone who isn't happy with whatever they are using now. I may try the Chauvet brand at some point (being 1/3rd less expensive), but it's good to know that this is available and works every bit as good as is claimed.

During the Covid lockdown I spent a lot of time trying to learn about the best current offerings of fog machines and haze machines and the right kind of fluid to go with one of these. I selected the ADJ "Volcano" as I had read some reviews here suggesting a water-based haze fluid could be used with that machine. (Note, some reviewers say yes, some say no, some say use only the fluid recommended by the manufacturer, some say it is all a pretty similar use ingredients. I took the chance with this haze fluid and really glad I did!) - I have several lasers and simply wanted to have the haze effect to really enjoy the light beams indoors. The Volcano fog machine using "Froggys Fog Beam Splitter" did the trick nicely. (It produces a volcanic blast effect with what looks like a huge burst of steam going right up to the ceiling where it then disperses gently and begins to fill the room). The smoke alarms did not go off. It was not unpleasant to breath the air, barely noticeable in my opinion. After 6 or 7 blasts the light haze effect was perfect around the room (L. 35 feet by W. 20 feet x H. 11 feet) and lasted a good 15 or 20 minutes with the air-conditioning running. (I left a similar review for the Volcano since this product along with the "Beam Splitter" formula turned out to be a great combination!)

I've been a DJ for 45+ years. I've owned DJ dance clubs for the past 39 years. I've used almost every fogger, hazer, fog juice & haze juice. I've met the Froggy's staff at various trade shows too. #1 These guys really know their stuff. Ask questions and they'll give you authoritative & straight, honest answers. #2 Use their recommended solution for your machine and it'll work and it'll keep working.

I bought Froggys Fog Beam Splitter specifically for use in a refurbished ADJ Fog Fury Faze I ordered. That machine was DOA. In a pinch, I bought a generic 1000W fogger and used this juice at an indoor 150 person gala event. With 4 bursts of 3 seconds, I had a great haze to catch the beams from my pars and moving heads. It didn’t set off the fire alarm. The haze hung for about 15 minutes.

Been running only froggys fog products in my machines for years now. I run this particular fluid in my chauvet hurricane 2d hazer with excellent results EVERYTIME. I have never had any issues out of froggys fluid but I have had an issue with faulty haze machine from the manufacturer...I called chauvet and explained what the machine was doing so they said that the thermostat was off or bad and to exchange it for a new one , which is what I did and no more issues.

This can be used in both water based hazers AND water based fog machines. Creates a very thin atmospheric effect that's 100% oder free. Lights look FANTASTIC. It has a very long hang time which allows much less of it to be used. I use it in both my Chauvet Hurricane 2D Hazer and my Chauvet Hurricane 1300 fogger. Hasn't set off a smoke alarm yet. Very pleased with this product. I also recommend Bog Fog for someone wanting really REALLY thick smoke. This product far out performs other brands. Froggy's Fog is the best.

Tried this compared to the manufacturer fluid. Froggys had better hang time and beam dispersal

I have used this in my Antari Z350 and Chauvet Arena Hazer. Looks great.

Froggys fog makes the best. Great for photo / video sets. Very fine mist haze that settles and hangs well in the air.

This isn't cheap, but it's probably worth the investment to protect my Antari hazer. Overall, this is a good quality fluid that doesn't leave an offensive scent.