Features:

  • Durably constructed to deliver a consistent flow pour after pour
  • These NSF-approved Kegco KT85D-L "D" System Keg Couplers
  • This nsf approved 3-1/2 diameter air-cooled stainless steel draft beer tower
  • 12 inch
  • Heavy duty faucet wrench: make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench
Nice upgrade for my old single tap.

I had an older single tap Summit SBC-500 kegerator given to me and the tap was leaky and the finish was pitted. This was a nice upgrade and fit perfectly. Now I can have two tall 5 gallon kegs and serve both hard cider and beer. I love the press-on line clamps. When I got the package there was a part missing, but a quick call to support and they had a replacement sent to me right away.

Twice as good

Two thumbs up! This regulators keeps the pressure so much better than my last regulator. I just converted my single tap kegerator to a double tap with this kit. Everything you need included in the tap and is very easy to covert from a single to a double. One heads up, however. The diameter on this is slightly larger than that of a single tower. You may need to tap new holes into the top of the fridge casing. Mine left a slight gap between the base of the tower and the top of the fridge. I ended up using some insulation foam from a can to cover the gap and keep the cold air from escaping. No big deal. When new, the tap handle was very loose and any slight jar would open the tap to poor beer. After a few months, the tap is stiff. I have not tried messing with it yet to see if there is anyway to adjust it. I don't think there is. If anyone knows how to adjust it, please share. Aside from those minor faults, I love this double tower. Now I can get two smaller kegs in my mini fridge and enjoy twice the flavors. Another great purchase from Amazon. I highly recommend this to those looking to double their drinking pleasure.

Works perfectly for a rustic bar, just as well as a mini-fridge.

I decided to build a big wooden bar for my wedding and this was the kit I needed. I borrowed a c02 tank, connected a keg on ice and had perfect beer by the second pour. I was nervous about foam and almost went a jockey box approach - but it turns out that if you pour the beer fast enough, temperature won't be a problem. I was so glad nobody had to pump a keg or drink foam. Bonus: the entire kit will fit in a 40MM ammo can (also available on Amazon) - so if you are building a portable rustic bar, you can take the tap off and put everything away to transport it safely to the next wedding.

Exactly what I was looking for!

I ordered this item to convert a used mini fridge into a man cave focal point. It was just what the doctor ordered. Each item came indivually packed in a larger box with no damage noted from the shipping process which was pretty quick. All items are well constructed and I suspect the tower/tap will function for years to come. You cannot go wrong with this item. Some thoughts for those wanting to do a conversion: 1. When considering a one tap tower vs. a two tap tower remember that keg beer is unpasteurized and lasts only 1-1.5 months. The smallest standard keg (1/6 barrel) holds something like 5.3 gallons. So unless you have a lot of beer drinkers all the time a two tap tower might be an unnecessary added cost. 2. I wouldn't recommend buying a new mini-fridge as you run the risk of destroying it if you drill the beer line hole in the wrong location. It took only a few days of looking around online (Craigslist) to find a used one for $60 that would fit the bill (look for one without a freezer). 3. There are PLENTY of videos online which show the conversion process and how NOT to damage your fridge, so once you have this kit it takes no longer than 30 minutes start to finish. 4. CO2 can be obtained from a gas supply store for much cheaper than a beverage supply store. Here in SC I can get a food grade CO2 fill up for $15 at Airgas National Welders. I hope this info helps and you enjoy your kit as much as I do. Happy Drinking!

Works great, easy to install, fast shipping

Works great, easy to install. Shipped quickly during the Christmas holiday week. Would buy again.

Quick delivery, awesome results

I bought this kit to convert an old dorm fridge into my garage kegerator and I'm amazed at how well it compliments my man cave. It was super simple and easy to install. The delivery of the package was so fast I barely had time to pick a good keg! The regulator and the tap are quality made, the tower installation was simple and easy. My beer is super carbonated now, so much better and cheaper than going to the bar!

worth the money, great product.

Couldn't be happier with my keezer conversion. Came packaged in individual boxes. Solid construction! This is heavy duty stuff. I ran my lines through copper and it pours cold from the first glass. I ended up buying a 10' 3/16 line. I never ran the one that came with it as i heard it may be too short. My friends are impressed with the quality too.

One of the best

Good quality and really good looking! Even the tower with the two taps is well insulated. Much better than others I've seen. I'm very happy with this purchase!

Heavy Duty Hardware - Great Quality!

Installation was easy and the quality is amazing. Very heavy top-quality hardware and connections. A few tips: 1. Most CO2 refill companies will require you exchange your tank for theirs - be prepared to give up the nice aluminum tank. Check your local fire extinguisher refill companies in the yellow pages and DO NOT use paintball refill retail outlets (some add lubricating oil to their CO2). 2. If running the tower mounted on a bar outside of the refrigerator, you will need to keep the beer line temperature at a cool 38 degrees. Do this by running the line through 2" PVC and using a 12 CPM pole fan (and 1" tube) inside the fridge to circulate the cool air through the pipe and tower. I used a 2.5" hole saw to accommodate the piping. Failure to do so will result in lukewarm foamy beer. Enjoy!

So easy to convert

If you are thinking about converting your single spout kegerator to a double, this is it. My kegerator regulator that I had before the conversion did not have a indicator to measure the amount of CO2 in the tank. This one does. So easy to convert, 4 screws for the tower and clamps for the hoses. Less than an hour to do. Now I have two 1/6th barrels hooked up. Awesome!

Full Reviews