- Minimizes sway caused from passing trucks and sudden wind gusts
- Double friction pads provide constant sway abatement
- Eaz-Lift sway controls are easily released when road conditions do not warrant their use
- Will not reduce road clearance
- Attaches with easy socket and spring clip connectors
-
Information
-
Twitter
-
Pinterest
-
Youtube
-
Facebook
Robbie Dyches
Absolute Necessity For Towing Large Trailers
Tow Vehicle: 2013 Ford Expedition Trailer: 2015 Keystone Outback 7,427 lbs (9000 lbs GVWR) - 35' Long I had towed my travel camper a few times using a load distribution hitch. At highway speeds, the trailer would sway occasionally and it was a bit unnerving. When tractor trailers passed, the sway was VERY noticeable and, a few times, my trucks anti-sway system engaged to keep it under control. I decided to add this anti sway bar as well as the 48380 (passenger side unit) to my set up based upon the length of my trailer. The welding mentioned in the instructions is required ONLY if the hitch on the tow vehicle does not have provisions for a sway bar set up; my load distribution hitch already had places to mount each of the sway balls so no welding was needed (If you are installing only one unit, you may want to consider part 48386 - a bolt on adapter that requires no welding). It is necessary to drill 6 - 11/32" holes in the frame of the trailer to mount the sway ball plate. I was able to do this and install the ball plate with the hardware attached in about 15 minutes (per side). We took a 1500 mile trip with the trailer over 7 days and WHAT A DIFFERENCE! The only time I felt anything close to sway was when being passed from behind by a tractor trailer. When that occurred, the trailer and my truck were pulled GENTLY towards the passing truck but it was very easy to maintain control. Turning sharply to make right or left turns in city traffic does create a "creaking" noise; when riding on the highway, there is no noise at all. Some have commented that backing up is not possible with the sway bars attached. This is extremely dependent upon the application. I was able to back up with the both bars installed both with them tightened (engaged) and loose (disengaged) without issue. The instructions explain to verify that there will be no binding or over extension when moving the trailer into a "jack-knife" position and I verified this before backing and again, had no issue. I HIGHLY recommend this product. It has made a tremendous difference in the handling of my truck when towing and has made me feel much more comfortable towing my trailer.
Billie Tyer
Buy both left and right sway bars for bnb peace of mind
This is the second set I have purchased in the past three years for two separate trailers. They work flawlessly and will make your trip less stress. I bought both a left and right set up. I would highly recommend you also invest in a weight distribution set up to go along with these sway bars.
Yasmine Soojhai
6200lb trailer
I already had one, but I needed a second because I was still getting sway even after one. I am pulling a 6200lb trailer with an 08 Expedition. This helped a lot.
Timothy Johnson
Safety and control of my RV trailor.
I last mont finished a 4,500 mile Trip with this sway device. It was a great item to have on windy days and with interstate traffic speeds. Large trucks passing me had little effect on my trailor pulling. Great product easy to use. A great safety item.
Erica Brehm
I ordered a left side anti-sway bar. I wanted two bars. I tend to be redundant. Safety First
For added safety I decided to add another anti-sway bar. Installation was quick and easy. Thanks so much for the fast shipping.
Lucky Day
Great product, great quality
This is the third different brand of sway control that I have installed/used over the past 14 years on a couple of travel travel trailers and EAZ LIFT is by far the best quality so far...I just wish I’d tried this brand/model sooner.
Angie Lopez
great addition
They are easy to install,and they made a huge difference on eliminating they seay of my trailer
Jennifer Mosby
Works as advertised.
Just the extra stability I needed. Be sure to check your measurements before drilling holes for mounting plate.
Jeffrey Nii Armah Adamah
Quality
Good compliment
Heather Boone
Great
Works as it should definelty glad I added it