Features:

  • Stores up to a full sized half shell Sankey standard keg or two sixth kegs; does NOT support use of Coors, Miller rubberized or other oversized kegs
  • Temperatures: Low 30s to mid 40s degrees; rolling casters included for easy mobility; Protective floor plate
  • For freestanding use only; 5 lb. CO2 cylinder (supplied empty) included with external or internal mounting capabilities
  • External Dimensions: 48 1/2 x 20 1/10 x 24 13/16 (height includes the draft tower); Warranty 90 days labor 1 year parts
  • For a black version please see model KC2000TWIN, for a single tap KC2000SSA, single tap in black KC2000
YES, you need this.

Made the jump from binge drinker to full-blown alcoholic! Converted mine to ball lock to keg homebrew, just takes barbed ball lock poppets (a gas in and a liquid out), ball lock kegs and some hose clamps and boom, 24 hour party time. If I feel lazy switch back to the sake taps the kegerator came with and buy a keg from the store. Mine had no problem keeping beer sub 38 degrees. CO2 regulator is terribly inaccurate but just get to know it and you will be fine wit carbonation. 2 beers on tap all the time? Game changer.

Love the Dual Tap

Who wouldn't love a dual tap kegerator? Came with all instructions needed to setup the kegerator--was completed quickly and easily in about an hour or so. Keeps the kegs cold and the beer flowing. When using two 1/6th kegs, there is still a little room to use as a fridge on the bottom, if needed. And, it looks nice too. Great for parties or just grabbing a cold one after work. Very happy with this purchase.

Good stuff

I am impressed with this product. I did not find it difficult to put together, nor was it difficult to set up. I added a two-line manifold instead of the T-splitter that came with it. I also ditched the screw clamps in favor of Oetiker clamps for both the gas and draft lines. Do be forewarned that if you wish to use homebrewing kegs, you'll need to replace the OEM keg connections and get adapters to connect to ball and pin lock connectors. You can get these from Amazon or any homebrew supply place. Do save your Sanke D connectors though in case you ever buy a commercial keg. You should be able to switch back and forth in a few minutes. People have asked about the inner dimensions of the kegerator - I don't know. It's plenty big enough for two pin lock kegs. See the attached photo.

So far so good. Turned it to between 4 and 5 and ...

So far so good. Turned it to between 4 and 5 and it nearly froze a few 7UP the kids had put in. Works great. Very quiet. Shipping was outstandingly fast but it must have been a little rough. The box with all of the accessories bounced around inside bending the shelves. I bent them back no problem. Only thing that could be helpful is if the hoses to the tape were marked left and right..

Pours cold beer

The over all is so far so good the beer is cold . The clamps that come with the lines are plastic they should be replaced with metal clamps also it only comes with domestic keg taps had to buy a a different tap for Heineken, Stella ect. euro Bees but still so far so good

Great product/ Confusing instructions

This thing works great, and I haven't had any issues or complaints with the actual product. Be aware that certain components might not be the same as the instructions. So it may mention blue tubes and you notice you have none. But you do have red tubes that aren't referenced. Same thing with metal and plastic clips. Move slow and keep a count all the pieces and you can put it together without issue.

It has been an excellent purchase. Note it does not come with a ...

I have the edgestar for several months now, other than the tap handles sticking if you don't use it all the time, It has been an excellent purchase. Note it does not come with a filled tank, so plan on getting it filled. 1 tanks has lasted me about 6 kegs and is still going strong.

Awesome...Just Awesome!

After having this for a few months I must say....I LOVE IT!!! This is in my basement and hold temp exceptionally well. I couldn't be happier with the purchase. The unit is quite and keeps my beer cold! I love the fact that this is not one of the overly complicated units. It is truly a set it and forget it configuration!

Solid product, low maintenance, good results

Fairly easy to put together! Holds both temperature and pressure perfectly. It took us about two weeks to empty the first keg and temperatures and pressure stayed perfectly stable the hole time without adjustments. The only thing I want to point out is that you should make sure your fave brew is available in the size you want before you buy. I had a few surprises, but in the end it all worked out well

Very good Quality for all the parts also stainless steel

Gift for my Son 45th Birthday He LOVES it He puts beer he Buys by the ka From brews

Full Reviews