Features:

  • 3-In-1 Projector Wall Mount Bracket - ceiling installation, sloped ceiling installation, and wall installation
  • Universal - compatible with projectors whose mounting holes are under 12" and weight under 30lbs (13.6kg)
  • Resistant to rust - ceiling part and projector mounting part are made of cold rolled steel, extendable pole is made of aluminium alloy
  • Adjustable - tilt 90°up/down, pan/swivel 360°, height from 1.96"-21.25",suitable for different circumstance
  • Package - 1×ceiling mount, 1×standard installation kit, 1×user manual
Don't buy high priced when you can get better quality with this one!

This projector mount is amazing. The setup was very easy and the mount holds my heavy projector with no problems. The best part about it is that I can change angles or mount position whenever I want by adjusting the screws, angling to my liking, then tightening them. When I buy another projector.... I will be purchasing this again for that one too. Advice: don't spend top dollar on another mount, this one will do the job (I have a epson 455wi and it isn't light). Hope this review helps you out.

Heavy duty projector mount

This projector mount is super strong! Very well made (I was a bit surprised because of the very reasonible price). The reason that i selected this product over some ohters, is that it can rotate 90 degrees at two different locations. Perfect for what i need for my art studio. Thank you! Great product.

This was actually fun to install

This may have been the most fun to install since I was kid with lego blocks. This bracket is universal and should fit any projector you have. It was fun to figure out how many ways i could attach the base to my projector. Instructions were a little difficult to follow, but you start to see how many combos you can make this thing work. I had my fun trying different variations of the bracket. It is not hard to figure out. Comes with a ton of hardware to make it work with whatever you have. Easy to adjust where you need it and hides cables really well. Very durable and sturdy.

Awesome value and quality

This mount was easily installed, and offered many configurable tilt, pan, and rotation options. Its very well made and was a perfect fit for my EUG projector. I have confidence that it will hold up well, even in the garage environment. My only complaint is for my installation, the min extension was still too low. So I had to run a 2x6 board on TOP of the 8in stringers, and attach the projector mount to that to raise it up another 8 inches. Even that was a bit lower than I wanted, but it was manageable. And I can still reach the buttons. That's a more solid foundation anyhow than the base of the stringers, and it was easily accomplished. So in the end, no biggie. The white finish made it look like the perfect mate for my projector- in the end a very professional looking installation. For $15 shipped, this was a great value.

Great Quality for the Price

I never have high expectations when purchasing an item that can cost 10x as much. In this case, I am very happily surprised. Mounting as very easy. The only problem is that I had to add wood to the drop ceiling to get the projector below the tile. This is not the mount's fault. It seems that this will mount will almost if not all projectors. There are a lot of possible positions. I would not trust a very heavy and expensive mount with this as the metal is not extraordinarily thick.

Exceptional customer service!

UPDATED: The product itself is sufficient for proper usage of most projectors. My main concern is the set screw for the extension arm out of the box was incapable of release. It was torqued down so tight that I could not get it loosened up with the provided allen wrench or one of my own with out stripping and destroying the set screw itself. After reaching out to the seller they were terrific and most helpful in sending a replacement part. I was able to successfully mount my projector and it works great!!

clever engineering,simple instructions, excellent outcome.

Best projector mount ever....i rarely write reviews for anything I purchased, but this item deserves one. I used to work in the a/v field professionally, and this is the best mount I have ever dealt with for your lightweight projectors...this review doesn't not apply to usage on a 3-gun CRT. Perfect fitment in all accessories, clever engineering on extension assembly, and an overall solid feel for less than 20.00. If you are looking to mount a projector less than 20 pounds or so, look no further. There is no need to spend money on a Chief or equivalent, take the cheaper route this time, you will not regret it.

Solid mount and hard to beat for the price!

This is a really nice mount for the price. I used 4 of them on a specially built board to do projections onto my windows for Halloween. I wanted to use these without the extension piece but the mount has actually be redesigned since the instructions where printed. It can still be used without the extension piece but it needs to be "rigged" a little to do so and the piece that is mounted to the projector "arms" piece ends up getting bend/curled up a little bit. But, it still works and holds the projector solidly. Thought I'd write this review to show people how I connected the pieces and used the bolts to "suck in" the once piece that was a little too wide which is what causes it to curl up a little. But it still holds the projector in place and that's my main concern. Bottom line, this is a well built and very nice mount for the price.

Great mount

Used this in our media room to drop our projector down. It was easy to install and made our projector easy to adjust at that level for the perfect screen angle. At the price it was also a steal compared to some out there. Easily fit onto my projector with the adjustable arms.

Great mount for any room

Bought this mount to use in my 2 car garage. Came with all needed materials including the projector mounts screws which I was impressed with. Most of my early mounts didn’t come with that needed hardware and left it to the customer to go out and purchase more hardware. A+ on that note. Came with an Assortment of needed screws, more than you will actually use to install this unit. I did take pictures of all the hardware and mount before and after installation. The only issue was the adjustable mount rail. I really didn’t like that design but this is all in my opinion anyways. I have I guess a complex when hanging things from my ceiling that cost a lot of money and don’t retain a safety screw or bolt to ensure my projector doesn't weigh down the one screw. I decided to drill in a safety screw after getting the projector just right. Other than that one issue it was perfect. Not taking a star off for my issues. Great item with a great price.

Full Reviews