• XtremepowerUS Panels are built from extremely high-grade materials that are proven to last in all types of weather
  • Pools pump and filter system circulates pool water through the SOLAR PANELS when it is heated & then returned to your pool. Once installed, these panels are cost effective, produce no greenhouse gases, and need low to no maintenance. Extend your swimming this year at a low cost with the help from the sun!
  • System is designed to be used on above-ground or in-ground pools. Each kit is made of - 2' x 20'ft panels. Each panel is made of lightweight, flexible, durable black polypropylene. The panel tube construction creates a larger surface area which optimizes heat transfer from the sun to your pool
  • Quantity of these solar panels needed is dependent on the pool size and the location, which may estimate by some websites.
  • Diverter kit may be required for pumps 1.5hp and greater. Sold separately under item number B01FNE41HA

Great but make sure to coat ends with Magic lube (NOT Vaseline) to be able to connect/disconnect without breaking tabs.

Ordered four sets for a 15 by 30 semi in-ground pool. The temperature going in is 73, temperature coming out is 79 degrees Fahrenheit. Current air temperature is 73 degrees Fahrenheit sunny and no clouds. So far I'm happy with the product will have to see how it holds up to the Florida sun and how quickly it heats up the pool.

I put the panels together with no problems and no leaks. I have a 800sf pool and connected them together to provide 400sf of heating area and the water temp on an 80 deg mid March day using a 6 gpm solar pump was 103 deg. It surpassed my expectaions and I would recommend this product.

Fast ship, new, as described. Very pleased with this seller and with this product. Fortunately, the manufacturer has changed the connecting nubs from plastic to metal. The plastic nubs that secured the connectors in the older models would snap off because they'd deteriorate under the heat stress over the season. This year we attempted to assemble two of the older ones and both broke. We bought two more, both have the metal nubs, a great improvement of this product. Our above ground swimming pool is about 8-10 degrees Fahrenheit above what it would be without this heater, and it's been pretty cloudy and rainy this year. Sometimes we take the filter out of the pump so that the water pressure and volume goes through faster, bringing up the temperature that much quicker.

This really works but when I tried to buy another one they say they can't ship it to me in Hawaii. Why not you did it before?

This is the 3rd purchase of this 40 sqft panels to heat a 10,000 gals pool. With previous purchase of 2 of these for 80 sqft, there was a 3-5 degree delta t across the panels. Next spring, there will be 120 sqft and I hope for even better results for an early swimming season.

I use it to warm a 16'x42" circular above ground pool. Connected it separate from the filtration using an extra pump I had. I have it laid out on a strip of patio brick that runs along the side of the house. The brick gets real hot in the sun. I slide the tubes periodically onto fresh hot brick when I'm home. That really boosts the temp of the water returning to the pool. Without the heat system the pool averaged 80, getting to mid 80's when we had a few 90+ days in a row. With heat system the pool is regularly 84-87, with it reaching 90 (even a little higher) on really hot days or a few really hot days in a row. The pool has been outright uncomfortable for me (too warm) a few times. I have it set on a timer for between 10am - 3pm. The sun really kicks in by 10 and that part of the patio falls into shade by 2:30. I'll run it extra (turn it back on) if I'm home and it's hot enough to still be returning warmed water to the pool. I turn it off on days it's gonna rain or is cloudy and/or cooler so I don't cool the pool instead. Hope that helps someone.

I live in Washington state, the weather here isn't all that hot in the summer a few days here and there it might get to 90 degrees, but mostly in the high 70’s and 80’s. this solar panel brought the water temp to 80 – 81 in a couple days, and depending on how cold it gets at night will dictate how long it takes to warm the pool in the day. My pool is 15 feet by 42 inches; about 4500 gal. On a cloudy day, here in Washington it doesn't heat the collectors well enough, but that is to be expected. For all of you in nice hotter conditions it should work well. Do not use at night it will cool the pool down unless you hook up a transfer valve directing the water straight to the pool and not through the collectors. You get 2 panels 20 feet long rows of black PvC tubing that collects the heat from the sun and warms the water and is pumped back into the pool. My pump is a ½ horse and the pressure is just fine. My pool was mostly in the mid 70’s a bit cold for the wife and I. It doesn't come with a hose so I went to home depot and bought a black 24’ hose and cut a 3 foot piece and that worked great, I used the clamps that came with the collectors. Make sure you put the rubber rings on the elbow connector before hooking this all up. there are some U-Tube of people that have hooked up an elaborate system using these collectors. there are some pretty cool ways to use these. Mine came damaged and they replaced it right away within 5 days it was on my doorstep; very good customer service. You can lay this right on the ground if you want. I recommend using a black plastic sheeting to go under it; the stuff you put down for painting; about 10 dollars for 25 feet long, that way the grass or dirt doesn't cool the collectors from underneath. Unroll it in the sun and let it sit a little bit and it will flatten out just fine. Be genital with the panel do not drag it across anything rough or sharp. I give 5 stars because the item works well and the customer service was prompt, courteous and was dealt with in great time.

Awesome product! Extremely Fast delivery and setup was a breeze if you are comfortable with working with PVC. I purchased 2 panels to start with, and I am so impressed with the quality and results that I will be ordering 2 more panels. I am very happy with the results!

I purchased one of these for this pool Steel Pro Deluxe Splash Frame Pool I used this pump Hayward SP1580X15 Power-Flo LX Series 1-1/2-Horsepower Above-Ground Pool Pump with Cord as i routed the water up 2 stories to the roof and the standard pumps (the intex brand pumps are trash) couldnt make it up the long run. (note: in the directions, there are specific instructions on how to run the pipes with a diverter valve for motors greater than .5hp. to get these results you MUST install the diverter valve) Live in Washington state and we have had a decent summer so far. On 80+ degree days, this thing will heat the pool up to 90-100 degrees. Im guessing it takes a couple days of warm weather to get to that point, but once its up there it seems to retain through the night and just keep getting warmer the next day. NOTES: - Make sure to set up a timer on your pump to prevent it from running throughout the night or you will lose a ton of heat running water through it without sun. - in the directions, there are specific instructions on how to run the pipes with a diverter valve for motors greater than .5hp. to get these results you MUST install the diverter valve - If running up a wall, DO NOT use sump pump hose. It is extremely cheap and will eventually melt and stretch with the heat and stress of gravity. Get some good "spa" hose (not from Home Depot!!!!, they are extremely over priced there. If you have a McLendons around you, they have it for a fraction of the price and buying bulk gets you a discount. If not them call around. Just avoid HD!)