Features:

  • UNIQUE FEATURE-- The filter wrench has a large cut out in order to clear the crank position sensor area.
  • DURABLE-- 4.6mm thickness metal around the square hole. NOMORE CRACKED when you try to twist it hard.
  • LONG LIFETIME-- made from high strength forged steel for firm and durable, without the problems of broken in half, stripped the filter housing etc. (Hint: put a rag or sandpaper inside the wrench will help to grab filer tightly)
  • PERFECT FIT-- for all Harley-Davidson Twin Cam Big Twin models and other models with oil filters with 14 flutes.
  • USAGE-- Easy of Use for installation and removal of oil filter Allows the spin-on filter to be turned with a 3/8" drive socket wrench.
Yes, it's the right one

Bought this to replace the one that broke. It's virtually identical to the original one I bought from the HD dealer. I use it on a 03 HD Fatboy, you need it to get it the filter out from behind the forks which is jammed in there. Still a PIA to get to, but at least it's possible with this tool (and a ratchet with an extension).

2010 FXDC Super Glide Custom

Fits my 2010 FXDC Super Glide Custom. Used it this weekend and it was extremely easy to remove the filter without damaging anything.

Must have - don’t try with out it.

Works great for HD 2015 Road King. Job was a nightmare without this tool.

Solid metal

Seems solid and has yet to slip.

Great Product. Works Great

Perfect exactly what I was looking for. Highly recommend. I would buy again.

Clampit Dont Crampit

Fits the filter perfectly, and also slides into the spot around the filter with no problem. Harley made the tolerances tight to get at the oil filter on the 2017 Dyna Street Bob, but this worked well. I used it in conjunction with a custom made plastic orange drain pan to try to mitigate any oil leaking out of the filter, and although not perfect, it proved to be way better than without one. The filter wrench has a cutout which is actually handy to ensure that the wrench is seating onto the filter properly and can also aid in getting the filter & wrench separated after removal. Good tool.

Great

Its metal and not plastic easy to use, must have for a motorcycle

Perfect Fit!

It is exactly what you need to remover the oil filter off you bike (fitment was on a 2009 H-D Road King) . Very good quality.

Filter wrench for 2006 Ultra Classic

I'm glad I got this. The previous owner of my bike had the strength of a gorilla when he put on the oil filter. I was afraid that this wrench would slip as I had to get a breaker bar on it to get it free. It held the filter just fine and I was able to get it loose. I've moved to K&N oil filters with the nut on the top but I'm keeping this wrench for sure.

Great product!

This is a great oil filter wrench. I used it on my 2017 Harley Ultra Limited.

Full Reviews