Features:

  • FITMENT - 2007-2018 Jeep Wrangler JK. Dose not fit for 2017 JK Rubicon Recon model.
  • HEAVY DUTY CONSTRUCTION - EAG manufactures their Jeep Wrangler JK unlimited front bumper to exact tolerances from 5/32" thick mild steel sheet and 2" x 0.120" steel tubing for superior strength and durability. High quality textured powder coat for corrosion protection.
  • PERFECT FOR OFF-ROAD USE - The EAG rock crawler front bumper is equipped with 9,500 lb. rated D-Rings on beefy mounts and an aggressive tube over rider with additional light accommodations. Black isolaters and washers are included. The JK Wrangler front bumper features a built-in winch plate that is capable of supporting a 12,000 lb. winch.
  • OE FOG LIGHT HOUSING - Our bumpers relocate the stock fog lights to widen their field of vision. Pre-machined attachment points insure flush and simple installation of pre-existing OEM size fog light assemblies. (Fog lights not included).
  • EASY INSTALLATION - Direct bolt-on.All necessary hardware and installation instructions are included.
  • Vehicle Specific fit
Good value - hardest part of install is getting the OEM bumper off.

The toughest part of installing this bumper is removing the stock JK bumper. The bolts that hold the factory bumper on are a pain to get to. Took me about and 1 1/2 hours for the installation. Most of that time was spent taking the original bumper off. It was a little tricky installing EAG bumper by myself - getting the bolts to line up - but I was able to do it. Would have been easier with a helper. For the fog lights - a little tricky getting the nuts on. Very limited space on the new bumper to get a couple of fingers in there. I used an open end wrench with a small piece of duct tape on to hold the nut in. Also, the wiring harness from the stock bumper will work for the fog lights. Just peel back some of the electrical tape and there is enough wire to reach the lights in the new bumper.

2015 jeep wrangler unlimited .

I looked for a long time for a bumper(2 weeks) I found this one by E-autogrills . Was a bit Nervous because I have never heard of these people . Also found the same bumper by barricade , so they look the same any way. I ordered the E-Aotogrills cause it was a little cheaper. Being I read the specs on both the on difference is a couple inches , so they say. I truly believe they are the same . I recieved it yesterday along with a 9500 lb winch from smittybilt . The packing was great but the box was beat up. There was a couple little shipping chips on the bumper but was not an issue anyway . Little bit of touch up black and done . The wife and I immediately went to my shop and installed . We love it ! . For the money it is awesome . Was very easy to install , fit was perfect . Original fog lights fit perfect . The holes for the winch was a perfect fit. We installed this with in an hour . That is including the removing of the stock bumper and installing the winch. I have not wired the winch up yet . I did have a Air ratchet. So if you are looking at this bumper and it'd your budget , YES I would buy it . Save the 30 -40 dollars over the other . If you study long on this you will study wrong . Hope this helped you.

Solid bumper for the price

I installed this bumper on my 2007 Wrangler Unlimited X almost two months ago now, and have no regrets so far. Easy to install and just required extending the wiring for one of the fog lights to make it work. Married up well with the 9,500 lbs. Smittybilt winch I installed too. The powder coating could be better, but for the price and being a rugged Jeep that actually gets use as they are intended to see, I've let it pass. A sad story to account for the construction: I live in Montana. Less than a month after installing it, I hit a deer for the first time in my life. We have A LOT of animals on and crossing every type of road out here. I was traveling down the interstate at 80 mph when it appeared seemingly out of nowhere. I'm very cognizant and hypervigilant to animals on the near roadways. There was no preventing this impact. It happened so fast I didn't even get the brake pedal depressed. Let's just say what happened to that poor deer is that she died instantly. Virtually no damage to the bumper or Jeep at all. Just a very small dent and paint chip where the one provided shackle that wasn't hooked into the winch cable hit the bumper itself from the impact. Don't know how the shock bumper would have fared, but doubtfully as well. Just glad I was in my Jeep and not my 2002 diesel Jetta--the deer and I would have been much worse off. Overall, I'm very pleased (just wish I would have gotten it at the current $295 vs. the $329 I paid).

nothing but 5 stars !! money well spent, even built better than the higher priced ones out there.

like everyone says it's 5 stars, from the looks, to the ease of putting on, to quality of build. again it will take you a lot longer to take off the plastic shield and get off the factory bumper and fog lights than it does putting this bumper on, it literally takes only a few minutes to bolt this bumper on it takes longer to put the little screws that holds the fog lights on than bolting the bumper. also a hint everyone says a deep well 19mm socket but for one of the bolts on the driver side you will need a normal size 19mm socket also. also you can split the tape on the factory fog lights and stretch them to make them work without cutting wires or buying a adapter.

Awesome bumper. I'm not very handy

Awesome bumper. I'm not very handy, but I was able to install this bumper with a friend. Only thing is that you will need power tools.

I love this bumper

I love this bumper. I've read reviews saying the packaging was bad and it came scratched. Well mine didn't. It was well packaged and not a scratch on it. It's heavy duty but I was able to install in about 30 minutes by myself. You'll need to pull your fog light wires out a bit to get them to extend but that was simple. I've already installed a winch and lights on my bumper and it looks fantastic.

Super bumper!

EAG rocks! My bumper came to within 30 miles of my house in 1 day on 2 day Prime shipping. Then it went clear across the country for some unknown reason and stayed there for 2 days. I gave it an extra day to come back but it didn't budge. Called EAG and they immediately shipped another one overnight and took over getting the errant delivery back to them. Very good customer service! It wasn't their fault, UPS screwed up, but they fixed the problem. Did I say EAG ROCKS!! The bumper is better than I thought it would be and am super happy with it. The fog light holes fit the stock LED fogs well but keep in mind you will need nutplates or rivnuts to mount them. they are only holes and it's almost impossible to access the back to put nuts on bolts. I also had to pull the stock wiring out of my stock 2018 Wrangler JL bumper since it only hooks up to one side on the JL. It took about 100 screws and panels to get to it!! Crazy way they designed that thing. This bumper is stout, well made and the finish looks no different than others 3 times the price. Thanks EAG!!

Great Value, Rugged, and Looks Good!

For the money, I couldn't be happier! Looks great on my ride, and for far less than the big name brands. Installation was pretty straightforward, and everything needed was included with the package. I installed it by myself, but having a helping hand would be ideal. I mounted a (http://www.amazon.com/gp/product/B008JCW9GY/ref=cm_cr_ryp_prd_ttl_sol_3) winch to it without any extra purchases required. Some have mentioned the fog lights needing to be spliced, but I just cut some of the factory electrical tape, and they fit fine now. One caution: mounting the fog lights can be a bit tricky, as there is not much room to put tools behind the mounting holes. I used some "clip nuts" to mount mine. Overall, I am very pleased with the purchase, and I love the look of my Jeep now! If you found my review helpful, please feel free to indicate it below. Thanks! :)

Five Stars

Just got into a wreck, weather was pretty bad and I slid into this guy car my jeep is okay but the guy car is beyond messed up.

Great bumper upgrade. Super easy install.

Very solid bumper. It came well protected. It did have a couple small, and I mean small, blemishes. I put a few coats of paint on to protect from the Upstate New York winters. I purchased some aftermarket headlights and fogs to go with it as well as a light bar - all for less than the price of similar bumpers. I can't imagine getting any better quality for the prices of some other ones. As everyone says, taking off the OEM bumper is definitely the hardest part. If you don't have the exact right tools, don't bother trying. I believe it was a 19mm deep wall 6 point socket. 12 point won't work. This was the first major upgrade I did by myself and I'm glad EAG made it so easy.

Full Reviews