Features:

  • SUPER BRIGHT AND WIDE ILLUMINATION RANGE: Advanced LED chips give out bright and white ray for clear visibility. Special designed lamp cup leads to wider illumination range, allowing you to see the left and right clearly.
  • BETTER HEAT DISSIPATION: Quick cooling aluminum alloy heat sinks and high-quality heat conduction silicone gel can effectively extend the lifespan of the light bar to over 30, 000 hours.
  • HIGH PROTECTIVE PERFORMANCE: IP67 Waterproof Rate, waterproof up to 1 meter of water for 30 minutes and effectively dustproof. The stainless mounting brackets are rustproof and anticorrosive.
  • ADJUSTABLE MOUNTING BRACKET: With adjustable mounting bracket, the work light can adjust to about 45 degrees, which makes changing direction easier. . WIDESPREAD USES: The light bar can be compatible with almost all Jeeps, 4x4, Trucks, Motorcycles, SUVs, ATVs, Cars, Boats, etc. Many indoor and outdoor uses: Garden Lighting, Backyard Lighting, Back-up Light, Off Road Lighting, Construction Lighting and so on.
  • PACKAGE INCLUDE: 2PCS 18W Flood Led Pods
I had to buy a separate wiring harness but you can find one easily in other reviews here

I give it 5 stars. I had to buy a separate wiring harness but you can find one easily in other reviews here. Installation was easy I added them to a Yamaha Rhino so I can see what I am doing when plowing snow. They are awesome! Wish I had bought them years ago. The only downside is they turn off when raising the plow using the winch. I suspect the winch draws so many amps that the Rhino's system can't handle the lights at the same time. The lights come back on when the plow is raised. Not an issue that has to do with the lights so no points deducted. Wondering if anyone else has experienced this? Edit, I fixed the issue where the lights go off. Originally I wired the lights to the relays for the winch, since it was convenient and there is both a hot and ground terminal. Amateur move, indeed. I rewired directly to the battery and now have no problems Cheers!

Nice lights but one issue

Lights are sturdy and are very bright. I've read where some have said to seal with silicone for added protection. I didn't do that, but what I found was that almost all the allen head screws that are on the outer housing were loose. Some needed just a little tightening and some made almost a full turn. With almost all of them that loose, it will definitely get some moisture inside. Didn't take but a couple of minutes. There are two sizes, both metric. Once those are tight, I see no need for additional sealing. For those of you who already installed them, it would be good to go and just make sure all the screws are tight. I already ordered a set for my Dad for his truck. Big improvement over the 55W halogens I had before.

Strong Construction

Shoutout to Nilight for the strong construction of the light, Bought in August 2015 and have had them on my truck as Aux reverse lights, last night leaving work the nut came loose and I dragged the light 30km at a speed of 100km/hr. light still works just beaten up

Great lights, great price!

I bought these lights to use as reverse lights on my 05 F-150. After I had the windows tinted and smoked my taillights the factory lights just didn't do anything. These lights where extremly easy to install. I installed them on my tow bar and they are small enough to fit right under my bumper. They produce a immense amount of light. The light is spread out with a wide enough range that every thing in my mirrors is lit up.

Great lights, see pics for a good illustration

These lights are great on my four wheeler. From over 100 feet away, they clearly light up a two story house including the tree out front that is closer to 200 feet away. There are only two things I had a problem with: i had to re position one of the rubber gaskets to get the proper seal and i wish the wire leads were a bit longer. Even so, you can't go wrong with these lights. The pictures are the of just the wheeler's headlights and the headlights with the LED lights on. The chicken coop is 90 feet away, and the hanger looking building is about 225 feet away. Very impressive amount of light.

Great light output

I bought 2 sets of these to upgrade the stock lights on my tractors. They looked like they would make good work light replacements and oh man, are they bright. I put one on so I could see the side by side difference between the old halogen work lights and these. It's like comparing a candle with the noon day sun! The light temperature looks almost blue in the pictures but it is ultra white. It's not hard on your eyes to use the light, only to look at the light! I'll be buying more for sure. In fact I bought these because I have a Nilight light bar I bought for a trailer but is actually too bright!

High Quality Product!

This is my second set of LEDs from Nilight and I am still pleased. I originally purchased the recessed LEDs for my rear bumper (using as reverse lights). There are several reviews that mention water leakage...if you'll take a couple of minutes to tighten all of the allen screws on the lights, you'll have zero issues! I installed these pods on my front bumper (using the Nilight wiring harness) and they are super bright! Thanks for making LED lighting affordable for everyone! Top notch quality, highly recommended products!

Great pods for the price!

Mounted these on my motorcycle and am very happy with them. Mounting and wiring (not included) were easy enough for this humble home-gamer. Now I'm tempted to put pods or a light bar on everything I own with a motor.

Great motorcycle headlight

These lights are great. I put them on my motorcycle and they are hella-bright. Very easy install, this is the most electrical I've done and I spent maybe a couple hours doing so. I bought a harness separate from the light which had a switch and it all intstalled flawlessly. I have not used it in wet weather yet so I'm not sure how it will handle condensation.

Great quality and easy to install instructions!

At first was a little concerned by the small packaging I received. But once I opened it up and saw the quality of materials used to make the LED strips, I was impressed! I installed my bed lights in about 3 hours. The only thing I had to add to the materials I received was extra wires. The material that came with the kit didn’t have enough lineal feet of wiring to reach the interior dash of my 2015 Tacoma, where I wanted to put the switch to operate my lights. But it was my choice where to put the switch. All in all, I am totally satisfied with the light kit! I’ve shown it to several friends and they are impressed! I absolutely recommend this bed light kit to anyone who is interested.

Full Reviews