Features:

  • SUPERCOAT rolls like paint, wears like steel! If you can paint a wall, you can use SUPERCOAT.
  • SUPERCOAT’s breathable two-part waterborne epoxy coating system is the hassle-free way to give your garage, basement, patio, dog kennel, storm shelter, wine cellar, rec room, or other special areas a professional, easy to clean, decorative finish.
  • The kit includes a cleaner/de-greaser for preparing the surface to be coated, the two-part epoxy coating, an anti-slip aggregate to prevent the floor from being to slippery, decorative flakes, a stir-stick, and easy-to-follow instructions.
  • SUPERCOAT is as easy to apply as paint after minimal surface preparation. Other products require that the surface be acid-etched. If not done properly, acid-etching can harm the concrete floor, surrounding areas, pets and humans. With SUPERCOAT, no acid etching or mechanical prep is necessary in most cases. Clean the surface with the included degreaser, mix, and apply with roller. Scatter flakes in wet epoxy.
  • After applying the flakes, we recommend using either SUPERCOAT Acrylic Glaze Coat or SUPERCOAT Waterborne Urethane Glaze Coat, both sold separately, to add shine and durability, to protect the decorative flakes, and to make cleaning even easier.
  • SUPERCOAT is a professional grade floor covering that is far superior to traditional floor paint. Our water-based chemistry forms a unique coating that allows moisture vapor to pass through. Unlike other coatings, SUPERCOAT resists blistering, chipping and peeling
  • SUPERCOAT is resistant to damage caused by automotive chemicals, such as gasoline, brake fluid, battery acid and standing fluids. It provides protection against hot tire lift, and adheres well to concrete and wood.
  • Each kit covers 200-250 square feet, and is a partial flake kit. For heavier flake or full coverage flake, contact the manufacturer at (866) 679-7154.
Looks great!

Looked great in my garage and saved a ton of money getting it done professionally. Make sure do do it when the weather is right outside.

Beautiful Result

The epoxy Floor was great. It was simple to put down and looks fantastic. Biggest thing that you need to do is to get the floor fully cleaned and decreased before applying.

Superior Sandstone Epoxy Floor Coating was easy to do!

This product was so easy to use. My son and I did it and neither one of us is "constructionally" skilled. Everyone has noticed our new and improved front porch and they all love it.

Product worked excellent in my shop!

Product worked excellent in my shop! Directions are minimal but adequate and easy to follow. It would have been easier with two people, one to cut in and drop flakes and the other to roll but, like George Thorogood, I work alone. Or, was that drink. If I were to do this again, I would do as I did with the Supercoat glaze, used after the epoxy. Buy empty one gallon and quart cans (1 each) from any hardware store and pour half of each can of Supercoat into the empties. This will allow you to mix half of the amount at a time so the epoxy doesn't harden faster than you can work. Make sure you stir parts A and B thoroughly before dividing up. Preparation is key to any epoxy coating. Don't cheap out in that area. I used two part epoxy that comes in a caulking tube and play sand to fill any cracks and you can't tell they were ever there. A grinder, cup wheel and dust shroud (With a good vacuum) does wonders if you need to mechanically remove anything from the floor before de-greasing and cleaning. Coverage was about 200 square feet per gallon so plan accordingly. I think this is because the epoxy hardened quicker than I worked and I was rolling too thick. Once started, you can't stop until it's done.

Great product and finish

Finished the floor last weekend and had to spread it over two weekends because of vehicles and fridge. This product exceeded my expectations and came out great. Prep as everyone says is vital and key to the finished product. Used Supercoats Urethane Glaze to finish the look and add protection. It has a very hard gloss finish that looks great. I was worried about the finish as I was coating over 15+ year old epoxy paint that was worn out and showing its age. Great product and worth spending a bit more than an lower quality box store version. Used two kits for a two car garage with a landing and had product left over.

Outstanding product - highly recommended!

Outstanding product. Less prep work required compared to other epoxy floor coatings. Very easy to apply. Tossing the decorative flakes in a consistent pattern was a little challenging the first time but you get the hang of it after a little while. The finished floor definitely exceeded my expectations and looks fantastic. Time will tell how durable it is but it seems extremely tough and scratch resistant. Highly recommended!

Follow the directions!

After reading the reviews and watching several videos about how to properly install I decided to give it a try. I am very pleased with the results. The mistake I made was covering the entire 2 car section of a 3 car garage before laying down the flake. Therefore I had to do a second coat and install the flake as I painted the grey. I also went to home depo and purchased extra flake to give it a heavy flake look. Lastly, YOU MUST get the polyurethane top coat for it to look and feel professionally installed.

Simple process, very nice finish.

Simple process, very nice finish. I also purchased the clearcoat to go over the top, great product. Very nice red brick color.

Easy to use as long as space is well vented

Easy to use as long as space is well vented. Needed product for patching a few areas on garage floor that was done a few years ago by contractor. This was easier and cheaper than another servicing by contractor for just a little work

Full Reviews