Features:

  • US Design Patented
  • Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.
  • pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed.
  • Easy no drilling installation with instruction and mounting hardware provided. | NOTE: Small holes will need to be cut in the bedliner for vehicles equipped with over-the-bedrail bedliner to secure the clamps for proper cover installation; cover will work with under-the-bedrail bedliner without modification.
  • LIMITED LIFETIME . | IMPORTANT: Please measure your truck bed size before ordering. We accept returns; however customer will assume the return shipping cost if ordered wrong.
  • Fit type: Vehicle Specific
Great fit and feels like great quality

Ordered this cover for my new 2018 Tundra after reading many different reviews on Amazon and doing some searches online. I wanted something that would be high enough quality to withstand the weather in FL and also look good while doing it. I also had a price point in my mind I wanted to stay around which was $250 and this cover not only met that price point but also had solid reviews. After receiving nine I can say that the reviews were not wrong!!! This cover arrived packaged very well and had all the necessary equipment and brackets needed. My truck has a spray in bed liner and rail system so I had to use the included metal brackets that fit into my rail system. The cover came out of the box inside a nice little cover that I suppose you could put the cover back inside if you had to take it off for any reason. It also comes with additional seal stripping in case you don't have a bed liner and there are still gaps between the cover and the truck bed. I didn't appear to need them with my truck. The clamps and toggle locks were easy to setup. The only small challenge I had was getting the metal brackets down my tail system just due to the paint on the rails. A few light taps with a mallet got them moved into position then tightened down with the included allen wrench. Overall so far I am very happy with the purchase and looking forward to how well it holds up over the next few years. It feels and looks like a high quality cover and I was able to get fully installed/adjusted in about 15 mins (between interruptions from 3 of my daughters wanting to know what I was doing out in the garage...)

Quality + Functionality / Value = Eye of the Tyger

I installed this Tonneau cover on my Tundra Crewmax about a week ago and here our my initial thoughts, impressions, etc. Pros: - $200 Tonneau cover?!?!? That isn't made out of paper towel and popsicle sticks? Too good to be true? So far the value to money spent is reason enough to give this item 5 stars! If you have done any window shopping which I'm sure you have at this point you'll know $200 doesn't even get you in the door in regards to a tonneau cover. The overall construction seems to be there from the vinyl to the aluminum. Time will tell but the initial impressions are positive. - EASY installation...as in one person could simply figure this out by looking at it and installing it by themselves in under 5 minutes. Seriously. It takes longer to open the box and get all the contents out then it does to install it. This also works both ways meaning if for whatever reason you need to remove it you can do it in under 5 minutes by yourself. My Tundra has a deck rail system and this cover comes with special 'adapters' that slide into the deck rail that you'll end up connecting the tonneau cover to rather then the actual deck rail system. - From a security standpoint if your truck has a locking tail gate (WHICH IT SHOULD) then no one should be able to access the bed of your truck UNLESS they straight up take a knife and cut the vinyl up. The cover snugs up very tightly with the lip of your tailgate if you installed it properly. - The cover has a very simple system of slide release plastic buckles that hold the cover in place if you wish to drive with the cover open. Although the buckles don't seem like heavy duty buckles so again time will tell how they hold up. - Did I mention it's a $200 Tonneau cover?! Good luck finding anything remotely decent for that price. CONS: - If someone REALLY wanted to get into the bed of your truck they could. It's just vinyl after all...Keep that in mind when you decide to leave things in your bed. - The locking mechanism is simple but annoying because you have to go back and forth to lock or unlock the cover. There are two separate handles that tension down to 'lock' the cover into place which means you have to do two things either way to secure or open the cover. Not the end of the world but annoying. - The included LED light is cheap and a throw away sort of item. It would be better served inside a closet or cabinet. But hey it's free so whatever. - The cover isn't a $150 instead of $200... I live in So Cal so I can't attest to snow, rain, water, etc. issues but for $200 are you really going to complain about it not being waterproof?! Shame on you. Buy a tarp you cheap skate.

Fits great on my 2017 Tundra DC. Very Happy

I'm very happy with the cover. I wanted something to keep the bed dry but was easy to remove and put back on. I had a Back Flip style cover on my old truck and I liked it but it was not easy to remove if I wanted to use the entire bed. This one fit perfectly, it took me about 10 minutes to install it and I have a cast on my left hand! I have the cargo tie down system in my truck and this shipped with the adapters for the clamps that fit right in the cargo system. Just slide them in, put the cover on, align the adapters with the clips on the cover and tighten everything up. It looks great! I like that it comes right off if I need access to the entire bed. EDIT: As a follow up. I've driven in rain, snow and through the car wash several times and it does not leak. It seals better than my $800 Bak Flip did. I'm really impressed so far.

Good fit and good quality for the price

Yes, it's only vinyl but I look at it this way, most theives steal due to opportunity. If they see something in your truck bed they will grab it. Cutting through vinyl and risking being seen for unknown gains just doesnt make sense. A thief can easily break the glass window in your house but if you have curtains they dont know what they will or wont get. For $229 this is an incredible value. Went on very easily, I like the extra safety clamps on the front trifold, the bars keep it plenty rigid and the weather stripping for the ends is great. Yes, it ripples a bit on the freeway but just in the middle. The sides dont move at all even at 80+ mph. I attached pics to also show that the swing box I installed doesnt get in the way of the release clamp. Thank god! Highly recommend especially for people like me who aren't sure if they want a cover. This is a very cost effective way to figure it out.

Perfect fit 2012 CrewMax Tundra

For $200, this thing cannot be beat. True prime shipping, 2 days via UPS. Box was is good shape, no dings or dents. Installed in about an hour. Took me a little bit of time to figure out which of the 3 settings I wanted the anchors set to. That will make more sense when you begin installation. All parts were present, no real QA issues either. Cover is well built and sturdy! Canvas top was thicker than I expected. Folding feature is a huge plus. Purchased for a 10 day family trip from Florida to North Carolina and back. All of our bags have stayed nice and dry! MINIMAL water intrusion, I'm talking single drops of water in one place or two. If water resistance is a concern, stop worrying. Properly installed this will keep all your gear nice and dry! Drove about 80 mph on the interstate, no issues whatsoever. Highly recommend. simply does what it says.

Easy on and off even comes with the brackets for ...

You just can't beat it for the money. Easy on and off even comes with the brackets for the Toyota bed rail system. One person installation and removal, comes with everything you need just keep the storage bag in the truck if you are out and about and have to remove it. This fit my 2016 tundra double cab perfectly. Absolutely no complaints about this product.

Tundra CrewMax - Looks cool, easy install!

I bought this for a Tundra Crewmax that has a 5.6 ft. bed (short bed version) and it fits perfectly. Some reviews mentioned it took 20 minutes to install - maybe I'm not as proficient, it took me a little over an hour, but I recognize I'm a perfectionist and I wanted it perfectly aligned. Pros: 1) It is a soft vinil, pre-tensioned tonneau cover, it means that all you got to do is unfold the trifold, align it and set the ancors. No rocket science to install. 2) It comes with all you need for your Tundra / Toyota bed rail system. The anchor tabs slide on the rails and have a small screw to secure them from sliding back/forth. Once set you need to anchor the back part (the closest one to the cabin) and secure both sides. Once secure, unfold the cover towards the end of the bed (I call this the "front" of the cover) and then repeat the process; secure the tabs and then use the lever anchors to secure it. Once this is perfecty aligned it should be flush against the front and end of the bed. The sides are a about an inch short on both sides but this actually is by design. 3) No drilling or mods needed on the Tundra, it is literally tighten and go 4) The anchors adjust the tension down by rotating a screw, this way the cover sits snug over your truck bed walls. 5) The anchors also adjust sideways to align with the rails, this is important, read the instructions, there are only 5 steps and are mostly pictures easy to follow. 6) Comes with a bag for storage, in case you take it off - I liked this, so I can store it in case I need to. Cons 1) It's soft vinyl, if you are looking for a hardtop, this is not your product. It worked for me and the price was unbeatable, does not look cheap and time will tell how well the vinyl holds in the hot Texas weather. 2) It's trifold - there are other covers of comparable price that are roll ups. I was undecided to go for that other product, but in the end, I liked this one better due to the simplicity of the install 3) It does NOT take 5, 10 or 20 minutes to install, it takes a little while more IF you want it perfectly square. If you don't care, then yes, it can be laid and tightened in 15 minutes or so. Overall I am very happy with the product and I recommend it!

Perfect Fit. Best Economic Solution

I was apprehensive about buying a vinyl truck bed cover for this price. I will not state what I paid, as it will be different for your market. It was a good price, to say the least. So, why should you buy this cover over any other? I sought out a cover that would be easy to install and remove as my needs dictate. As other reviews have stated, this cover takes about half and hour to install; that is from opening the shipping box through to closing the tailgate to admire your work. It is easier than you can ever imagine. The cover fits the truck bed as stated. Just the right amount of overlap to look professional. I am very pleased with the fit. When it is folded for partial cargo, the cover is still very good looking. If you are looking for an economical solution that looks great, this is the cover I recommend. If you want to impress your friends, people that don't pay you to drive your truck, and anyone that doesn't matter; go buy a more expensive truck bed cover that does the job this one does. This truck bed cover does the job it is made to do, it is a great price, and looks great. Great buy for me.

Can't believe I waited so long to get this

This cover is awesome. It has all the parts necessary to install it with or without the cargo rail system. The only thing is that I wish it came with instructions on how to install if you have the cargo rails.. I had to look up a video on youtube to find instructions. but once I got that figured out it was super easy and this cover is perfect. When we have a super strong rain storm I might get a little tiny bit of water that gets into the bed of the truck right at the front of the bed...and if I had used the weather stripping that they even provided that probably wouldnt happen. But I didnt because I was just trying to install it pretty quick and wasnt worrying about potential for minor leakage. I was able to install this by myself without much difficulty (after finding the youtube video.) If you are even considering - I recommend just going for it. totally worth it.

It fit perfectly and installed easily

I have never written a product review in my life, primarily because most products don't live up to the advertising hype. This product is very different. My wife and I are in our seventies and both have severe arthritis. Working together we were able to make the installation in about thirty minutes. If I should need to remove it, re-installation should take about 10-minutes, now that we have everything adjusted up. I hoped that it would offer some weather protection, but never dreamed that it would keep the bed contents COMPLETELY dry. This morning I put the cardboard box, the cover came in, into the bed (opened so it covered the whole bed), shut the tailgate and sprayed the whole thing with a water jet from my garden hose. I sprayed directly into the bed/cover juncture on three sides (I couldn't get a direct shot at the side against the cab bulkhead), but I sprayed into the other three sides from varying angles. I figured the cardboard would show me where there were leaks, so I could place the (supplied) weather stripping. When I pulled the cardboard out, there wasn't a single drop of water anywhere on the cardboard or in the bed. WOW! I don't know how long the cover will last up here in the deserts of Eastern Washington, (High UV exposure), but I do know VALUE when I see it. I HIGHLY recommend this product!

Full Reviews