Features:

  • MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
  • PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
  • STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
  • WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc
  • WHAT YOU'LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram
Works perfectly and looks factory!

This is the second of these MICTUNING switches I have purchased and will buy more as the need arises. This one had much better directions and a wiring diagram included that made install a breeze. The switch has a back light that lights up with the ignition on and the blue color matches the stock Polaris rzr4 1k XP back light color perfectly. One would think they were stock if you didn't know. The size is about 1/16" larger in width and height than the perforated cut outs on the rzr dash but I would rather have to carefully file extra out of the dash hole until it fits than have the hole too big by following the perforations.

Blue led indicator lights

These switches can be wired to show blue led light when the vehicle is on or off. Meaning the name of whatever you have wired to this switch would have the light on when the vehicle ignition is in the on position. Or you can wire it so the blue lights only come on when you turn the switch to the on (up) position.

Mictuning 5pin Dashboard Rocker Switch - Blue LED backlight - LED Light Bar design - On / Off - 20A 12V - Recommended

Nice switch. Easy to install in rocker-switch blank on the dash panel of our 1998 Jeep TJ. Nice blue color when on (we purposefully switched the hot & ground leads so that the backlight stays dark when off... which I prefer). This one now controls the light bar mounted to the front of our Jeep. That bar came with a wiring harness that had different connector ends, so we needed to use the jumper wires that came with this switch. easy to figure out, though the leads did pull out of the adapter ends way too easily. We reset them all using needle-nose pliers and did not have any further problems after that. Instruction sheet is just about worthless but we figured it out through trial & error (thankfully, no errors). Plan to purchase one additional rocker switch from this company... for a set of fog lights... already purchased and installed a switch for the lighted whip installed on the rear bumper. Recommended. Go for it.

Great switch!

I just installed this LED light bar switch and love the look of it and it seems to be very solid. In the package it included some very nice wires with ends already installed which made it extremely easy to hook up. Thanks for a great product and the fast shipping!

Best ive seen so far

Just installed in my SxS so I'm not sure how they hold up over time but out of the box they work perfect. Only thing I'd change is the words stay lit 100% of the time, so if your application will sit for long periods of time you just need to clip the red wire they supply and find a switched power source for one of the spades. Easy install, snapped in tight and plenty bright for night rides.

good guality

Perfect upgrade for the small round switch that came with the wiring harness nice backlit feature

Awesome appearance!

I bought a couple of these switches for the light bars in my truck. They're awesome! The bright LED lights give a great glow in my cab and I've had a dozen compliments. Wiring is easy and comes with instructions and everything you need. You will need to purchase additional wire depending on how far away your power source and lights are from the switches but mine installation was a breeze. It took me about two hours to install these into my truck but I'm very particular about appearances in my vehicle and measured everything out to perfection. You don't need to be an electrician to install these, Mictuning get's you all set up and lays everything out in a very simple way. I'm very impressed with the quality and appearance of these switches.

Perfect switch

Easy hook up. Works great. Fits perfectly in the knockouts. 1 of the 3 switches I installed in my new 2018 Polaris Ranger 570 full-size

Works great guys and it fitted in my o6 nissan titan ...

Works great guys and it fitted in my o6 nissan titan oe switch . This switch has two leds as if u want them on or off so i simplay took of the ground wire which is blk and leave the left blk one off, so now the led which stays on will be off and when u turn the switch on the 2nd led will light up . Problem solved good luck . So leave numer 8 wire off if u just want the led to be on while the switch is on

Great Switch, Great Documentation and Even Includes Jumpers for the Switch Lights

I used this switch when I installed a light bar on my Polaris Ranger 900 XP. I worked perfectly for me in this application. The switch fit perfectly in the existing blank in the dash. The switch feels nice and solid and has a positive lock when going back an forth. There are two nice touches that MICTUNING provides with this switch. It comes with a diagram that clearly labels the connectors on the back side of the switch. I used this switch to replace the round rocker switch that was included with the wiring harness I purchased for the light bar. This diagram made this change as simple as possible. MICTUNING also includes two sets of jumpers for the hot and grounds for the lights on the switch. It took me longer to pull the blank plug out of the dash than it did to wire this switch up and get it in place. I will use these switches for any other projects I have.

Full Reviews