Features:

  • MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
  • PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
  • STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
  • WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc
  • WHAT YOU'LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram
Perfect fit!!!

I bought this switch along with 2 others to go on my ATV. They just snapped into the switch box I also got from Mictuning. I just followed the wiring instructions for the switches and they worked perfectly. Running the wires so they were out of the way and not seen for my 5 rock lights and whip took me two days. I also bought extra electrical wire and connectors to get it done right. I have not hooked this switch up yet because I am trying to figure out the best light to go with it. I plan on mounting it right below the other two switches in the picture. The only thing I do not like is the LED light in the switch stays illuminated in the off position. They have not drained the battery yet but the longest I have gone without starting my ATV is 36 hrs. I may hook the switch up to the ignition if it becomes an issue. In all I am very satisfied with this product. Update 1/1/20 - I have had these switches on my 4wheeler for over 3 months now. As I stated in my review. I had some concern as to battery drain while my ATV was not in use because, the switches are always illuminated since I hooked my lights up directly to the battery. One switch for the rock lights and another for my lighted whip. I have not hooked up this switch yet and am waitting until this summer and warmer weather to do it. I have had temperatures below freezing for over a month. During that time the temperature got down into the single digits for several days at night and I did not started my ATV for 4 days. It started right up with no problem. The battery drain these illuminated switches use is very minimal. But if you want to wire it up to the ignition that is fine. In my opinion, you do not need to unless your worried they may accidently get turned on. On another note. I found out you can easily remove the switch handle itself since it is just a pin on the back side. My jacket caught the switch one time and popped it off. I just put back in with no issues. Mictuning makes a switch holder that comes with 3 switches already in it but for some reason they will not change them to what the customer wants. Probably because they would have to open the sealed packages to do that. Not sure if they already do this or not but maybe they could sell the switch handle separate from the switch assembly. I am sure it would cost less and customers would buy it to get what they needed. See pictures I have added.

FOUND BIGFOOT!

I have been looking for Bigfoot my whole life. I purchased this switch as a last resort. I installed it and waited until dark. Flipped this switch on and BAM, I saw Bigfoot hot footin' it through the back pasture. If you have not seen Bigfoot you need to get this switch. Oh yeah, it works pretty good to turn on the light bar on the jeep too.

Awesome rocker switch!! Thanks MICTUNING!!

Cant go wrong with MICTUNING. I have 4 rocker switches and 4 wiring harnesses, from them. I have 2 more switches on the way from them as well. The button looks amazing, on or off. The lower writing is illuminated all the time, and when the light is on, the sasquatch, or whatever icon you have up top, lights up, along with the bottom. I have the vader, this one, and 2 zombie switches. The think I love the most about MICTUNING, is that they send the wiring diagram and the jumper wires. The jumper wires are the most important to me. It is 2 steps that you don't have to worry about. They did it for you, just to make your install that much easier.

Im glad I switched to this switch.

The switch feels high quality, has a very nice on off click and feel, and clearly visible LEDs and etching so it is easy to read and should never wear off. I was really looking for a backup camera switch as a manual override for a backup camera installation, but came across this and it was a comical option. I am fairly new to wiring, and it was very helpful that the product came with a wiring pin out so I could show my friends when I needed help, and the included wire set really sealed the deal on this for me. I bought it to fit a stock blank opening on a Honda Odyssey, and some part of the switch is keeping it from sitting lower in the stock opening. I had to file the square corners down to round them off. That being said, still 5 stars.

Great switches that are well made!

MICTUNING is the rocker switch I only use if I'm ordering from Amazon. The only time I don't order there setup is when I'm needing something more custom. Otherwise, everything is from them. The quality is top notch, which is the first thing you'd wonder about given the price point. The lights are bright and it's easy to wire. They include a wire diagram and mine came with connectors that had spades on it, ready to hook into. I would call that an entry level wiring harness. The bottom (where the label is) is lit anytime the switch is hot. When you flip the switch to on, the top lights up to let you know that whatever accessory is on. They fit in all the different brands of rocker housings that I've used. Overall, I recommend any of the MICTUNING switches.

Great Rocker switches!!!

The blue in this particular rocker was slightly off-colored from two others I bought of the same brand and style. However, what's not to love about a funny light switch? Works perfectly, easy to wire, and have had no issues. I don't recall these being listed with any sort of weatherproofing protection, but I installed this on a sport four-wheeler for auxiliary lighting, and had no issues at all!

Glows and looks great!

Very easy to install. I put this on my 2012 570 Ranger side by side for my light bar. One thing I had to figure out is how to get the switch to only glow when the switch is turned on since i have it wired to the battery. It's made to glow all the time with your dash lights in your car. So I pulled the negative wire for that light (since there are 2 blue lights in the switch) and seems to work and still glows when I turn it on. The wires are included to allow the switch to glow. Even comes with directions!

These turned out awesome. Only complaint I have is the electrical connectors ...

Picture says it all. These turned out awesome. Only complaint I have is the electrical connectors fit VERY tightly on these, and are kinda difficult to pull off. Other then that, look great and work great.

Hilarious and sturdy

Hilarious spin on the light bar set up in my jeep. Love the lights when off and on. Very cool and funny to explain

Great product

Button feels good-quality and the LED lights up nicely. Fits well in the taller blank to the left of the steering wheel on my 2019 Tacoma TRD Off-Road.

Full Reviews