Features:

  • FLEXIBLE PVC TRIM with internal aluminum metal clips and gripping tongue – providing strong grip and excellent grip retention
  • EASY TO INSTALL push-on edge trim designed to cover sharp, rough edges – providing DIY edge protection on metal, sheet metal, and other materials
  • WIDE RANGE OF APPLICATIONS on marine, automobile, machinery, and equipment cases – including uses on boats, vans, forklifts, golf carts, helmets, playground equipment, and more!
  • WEATHER-RESISTANT outer PVC material allows for outdoor use – resisting temperatures ranging from -20° to +158° while withstanding moisture and sunlight
  • VARIETY OF DIMENSIONS available for various edge thicknesses – allowing for a professional trim with a textured black finish to be applied to a multitude of applications
Five Stars

Worked great on my 3/4 inch plywood outdoor bar.

Perfect fit!

My installation was a really strange place--I cut the top of my Dodge Dakota to make it a convertible and put this trim on the metal edge--worked great.

Trim lok edge trim

Used this trim lok to finish the edge around the powder coated aluminum mesh I cut for my FJ Cruiser. Makes my install look finished and complete with no sharp edges. Nice clean look. Very easy to install and stays in place. Happy customer

Used to trim sharp metal edges on rabbit cages. Worked wonderfully and looks great!

Ok, so I actually did not buy this typically known car trimming to be used on a vehicle at all. We needed some sort of edging to put around the metal edges of our daughters new rabbit cage my husband built to keep the girls from getting cut on it. The rigid plastic pieces made for cages would not work as the metal was ribbed. Ordered this hoping that it would work, at least for a little while. Not only does it work PERFECTLY for this, but it really looks great on as well! Everyone has commented on how nicely finished the cages and bunny house look with the nice black trim. The girls are very proud of it, and I'm pretty impressed with my husband for thinking to use this! The price was great being much less than $1 a foot, it''s a 25 ft. section and we have a good bit of it left. Putting it on the ribbed metal wasn't easy at times, but it went on the flat sections quickly and easily.

great quality product

This is great, just what I was looking for. Strong but flexible at the same time, I needed an edging for an art project to protect the edge of a 1/2 plywood sheet from chipping and this does the job. If you have a 90 degree corner it won't work, but it bends enough for gently curved edges. A bit expensive but worth it. Just in case, I used Iron grip sealant as well to make sure it stays in place and screwed it in a few places.

Adds a Professional Look to Home Shop Projects

This edge trim adds a professional touch to home shop projects. I restore vintage golf carts and this particular one required new upholstery and while doing that I also added a rear flip seat – The finishing touch was to add the "Trim-Lok Edge Trim®". It was very easy to work with and softened the sharp edges of the job giving it a polished look. See attached photos. I truly recommend this product for all sorts of jobs.

Great fit and great product

I needed this product to repair blow-molded golf bag carriers because the original trim had come loose (and the previous owner had tried to epoxy the trim back into place). I measured the thickness of the carrier and ordered the edge trim accordingly. After cleaning off all of the epoxy residue, I sanded and pre-cleaned the mounting surfaces. Then I used 3M automotive weatherstrip adhesive to provide a permanent bond and used vice grip pliers to secure the final seam until the adhesive cured. Great fit and great product.

Flexible, Professional quality product...

I used this as edging on a home made magnetic white board and chalk board combo. One side is dry erase, while the other is chalk board. I used sheets if galvanized steel on both sides of a 1/4 inch sheet of plywood. The trim worked great to edge the board. On the inside if the trim, the metal is like what you would find in a box of staples. The metal is grooved so it will break away when cut. This allows you to more precisely cut the trim to fit your project. The outer coating is a flexible PVC plastic that is easy to cut and mold into position. Great buy.

Best advice I can give is to make sure you ...

I bought this to replace the aging PVC trim guards for my car doors. I didn't want to use trim guards that use adhesive to hold themselves on, as they are problematic during hot months of the year. This holds on to the door edge REALLY tightly, and having an aluminum core, I don't need to worry about it rusting. Best advice I can give is to make sure you have a good pair of metal snips. This comes as a big coil, and you'll need a clean way to cut it.

Trim-Lok to the rescue again!

Used this stuff for years. Nothing better to cover a sharp edge. the aluminum "spine" makes it hold its shape well and can be removed in areas needing a sharp turn. Looks great and very durable. A SMALL amount of Gorilla Glue makes it a more or less permanent installation.

Full Reviews