Features:

  • Rectangular metal magnetic plates to attach device onto magnet mounts.
  • Great to use with smartphones and tablets magnet mounts.
  • The magnetic plate mount easily sticks to the back of devices for easy mounting
  • Very easy to attach without a hassle.
  • Works with magnet mounts designed to hold devices with the metal plate,
Very satisfied with this purchase

I used Mountek plates before, but switching from phone to phone weakened the glue. WizGear turned out to be much cheaper replacement and does the job. I'm using it for Iphone 6 Plus (which is quite heavy) but the thin rectangular plate lets the magnet hold it very strongly. Very satisfied with this purchase.

Works great super thin

These are great. I lost the original magnet I got with the magnetic Mount I bought in a store so I bought these as a replacement because I had the tiny little rectangle on my giant Note 8. I also bought these because they are super slim. I bought a vinyl skin from decalgirl online and I use a clear case on my phone but I didn't want to put the magnet on top of my skin or case and ruin the aesthetic, so I bought the super slim magnets and I put it underneath the skin and it looks perfect. It's an almost invisible and doesn't affect the skin at all. I put this underneath my clear case as well that is pretty slim and it still works just fine with my magnetic Mount and grips even better now that I use the larger magnet.

Very Strong hold

Works perfectly behind my Otterbox case and I did NOT have to stick it to my phone. Do NOT stick this on your phone if you don't have to because I've seen countless reviews showing how hard it is to get off without some form of damage. Also, do not put the magnetic side (I know both sides are magnetic) but the one with no sticky pad.... just place it inside your case with the pad side touching the phone... metal side..touching your case. The strength is great for the larger rectangular ones and I've not tried the smaller ones, but assume they're good too for smaller phones.

Excellent for magnetic mounting for 2 devices

Purchased to replace an aging volfon case with 1" diameter circular medal mount and ring holder combo for a S7 Samsung. With a spigen case and these wiz gear metal tiles for magnetic car mounting support. The volfon case with its key ring is nice for holding but terrible for magnetic mounts. The 1st image is the spigen on top and volfen on bottom. On the right is the 4 wizgear metal disks: 2 rectangle & 2 circular. 2nd image shows the best location i placed the wizgear metal between the tpu shell and rubber layer without adhering it to the spigen case. I layered the circular slightly over the rectangular one and didnt notice any bowing after putting the phone in. Note* I initially, attempted 2 rectangular ones horizontally however after setting the phone in. noticed an air gap between the tpu case and rubber which caused a clicking sound much like a milk cap. Overview this product is self explanitory it comes with 4 self adhering disks. You may or may not have to use the adhering.. i did not. Set it up between the tpu/rubber layer and it works fine. When driving, the mounts hold up to bumps, taps, without falling off.

Nice and thin. Very powerful magnetic plates

These plates work really well with cell phones and cell phone cases. They don't stick out but are very strongly magnetic and hold the phone onto the dashboard magnetic phone holders. Update - after using them for a few days. These magnetic holders and their plates are strong. In my case, way too strong. The problem was that when I tried to take the phone off the holders they wouldn't separate and the entire magnetic holder pulled out of the air vent and remained stuck to the back of the phone. Removing it by hand was pretty tough. These things are powerful!! Solution. I hacksawed one of the rectangular plates vertically, into a piece about 1/3 the size of the original, filed the rough edges smooth where the hacksaw had cut the thing, and then used contact cement on the phone and the back of the smaller piece of plate to attach the plate to the phone. Worked perfectly. Cutting the plate in this way reduced the magnetic attraction to the point where I could now remove the phone properly, but the attraction was still strong enough to hold the phone in place.

Works Well

I ordered this item after I purchased an I-Ottie. I-Ottie did include some metal plates, but they were not adhesive. This item comes in 3 different colors, but I chose the silver to better color coordinate with the color of my IPhone. I have a couple of cases, so it's great that there are four of these in each package. This works very well.

Must have for avid car mount users

I have couple different cases that I like to rotate so needed some extra metal plates for my car mount. I didn't want to get the regular gray ones since I stick these to the outside of the case so it doesn't scratch the glass back of my phone. These compliment my cases well and doesn't stick out as much as the gray ones. The surface of the plates is a grainy texture instead of being completely smooth which at times are unpleasant to touch but not enough a deal breaker to not use them. I use the car mount on a daily basis and haven't experienced my phone falling off even once. There is a hole located on each plate and I'm not sure what the purpose of it is. However, the sticker on the back covers over it so it's sticky whenever I touch that part. Overall though, a very happy customer.

Perfect replacement for plates that come with WizGear mounts

The perfect replacement for the plates that come with the WizGear mount. When I got a new phone I needed a new plate, since I prefer putting my plate directly on the phone instead of the case. The adhesive on the extra plates that came with the original purchase had degraded, probably because I left them in my car and live in the south, the hot car got to them. This is a cheap, easy buy. It would also be appealing to anyone who has multiple phone cases, that way you can put a plate in each case.

Just as described. Works well with different mounting systems ...

Just as described. Works well with different mounting systems other that wizgear. Sticks well to the inside of my case and holds well on magnet car mount.

Perfect replacements for my Anker magnetic car mount when my ...

Perfect replacements for my Anker magnetic car mount when my phone case broke and I needed new metal plates for my new phone case. I just needed one rectangular plate, but the 4 pack worked out great- I gave one to my boyfriend so he can use my mount when he's driving my car (we travel/take road trips a lot), and I wound up using the smaller rounds for my old ipod shuffle, which isn't really necessary, but wound up being really convenient with the extra plates this pack provides. Haven't had any issues with the mounts not holding to the magnet while the car is in motion (and I live in a mountainous area)

Full Reviews