Features:

  • MICTUNING MIC-B1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install.
  • Details Makes Perfect:adopt flexible strand copper wire,up to 180 watt load capacity.It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
  • Great Construction:40A Power Relay and Inline Blade Fuse for multiple safety protection.With 2 lights output connections,it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.
  • 10FT Extendable Wiring Harness:up to 10ft of wiring that is plenty of length to put it where you want.
  • CAUTIONs:We recommend professional installation,pls let professinal installer to wire the harness kit; If let the wire short circuit,the harness would melt and even caught a fire,We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well.
even a monkey can connect this..

just got this product in the mail. looks well made and packed safely. it came inside a box inside a bag waterproof by the way. literally took me 5 min to open and connect both of my 7” inch led lights to the harness. i will add head gasket cylicone to the connection since i want them 100% waterproof. im lazy to unplug them and add heat shrink wire. should’ve done that befor i clapped the connector down..will definitely order again for my truck led bar. very happy..

Great quality harness

Harness is exactly as described; includes relay, in-line fuse with spare fuses, male spade crimps for connection to two fog lights, and a weatherproof switch that can be changed out. All connections appear to be properly crimped and heatshrunk. The harness is well laid out for fog light/driving light locations and should work for most vehicles. Simply put I doubt you could make this yourself for less than the asking price of this harness given the wire, quality crimps, relay, fuse holder and spare fuses, heat shrink and wire looming.

this is the second one i've purchased and installed and they've been great. i used this one for a 52" LED ...

quiality made product. the wiring from the switch to the harness isn't that long...almost too short for what i needed, but i made it work. otherwise, this is the second one i've purchased and installed and they've been great. i used this one for a 52" LED light bar on my RV.

Works with halogen fog lights

I have a 2000 Dodge Dakota sport that didn't come with fog lights. I bought the factory halogen fog lights but could not get the factory switch and wiring to work. I installed this kit because with 37.5 watts per bulb (75w total), I was well within my 180w limit. Everything works great. The red light, when the switch is on, is a bit bright, but not a deal breaker. Overall, good quality and great price.

The wiring harnesses made the installation of the lights easy as all the connections were preassembled

Purchased 5 of these for multiple light bars on different ATV's. The wiring harnesses made the installation of the lights easy as all the connections were preassembled. I used these on 8 inch to 50 inch light bars with no problems. Can't beat the price for these.

Not Using it but...

The harness was shipped on time and arrived when expected. I did wire it up and it all worked correctly but I decided not to use it because the switch light was illuminated when the power was applied, not when it was off. This was being installed in the engine compartment of a rear engine motorhome to control a LED light bar and after setting it up I realized I couldn't see the switch in the dark (duh). I needed a switch that was illuminated when power wasn't supplied to the light bar. I'm saving the harness for use elsewhere.

This wiring harness was perfect. It allowed me to wire the lights and ...

I added lights to my riding lawn mower. This wiring harness was perfect. It allowed me to wire the lights and maintain a factory look. The light switch lights up when activated. I drilled a hole in the dash of my mower and the switch pressed in and locked easily. The double set of wires allowed me to hook up two sets of lights. Perfect.

Great so far, good quality, quick shipping

Very bright. Good quality. I put them on projector headlights that I ordered aftermarket for my f150 the h7 bulbs barely lit up the road. This kit fixed the problem. Since my headlights were aftermarket projectors I had the custom solder the wires the way I needed them to work so I could use the barn door for the bright lights even though it's only a single beam, aftermarket headlight projectors have the high beams with just a flip of a barn door inside the projector.

Installed in a John Deere Gator and here's how I did it...

First of all let me say I installed a 20" LED light bar on the roof of my Gator and wanted to avoid removing all the panels to access the underside of the machine, and if you've ever worked on one of these vehicles, you know what I'm talking about. The section of harness that connects the light to the battery was long enough to run from the roof, along the roll bar and then down the backside of the rollbar on the passenger side and under the seat to the battery. The switch harness however was much, much shorter - 3 ft long at the most and certainly not durable enough to withstand the brush, greenbriar and cactus that I drive through. I sacrificed a 16 ga outdoor extension cord, cut off the ends, cut the switch harness in two and soldered each end to both ends of the extension cord (use shrink tubing to cover the splices). Then I was able to run the new harness from the dash switch out through the firewall and then on top of the floorpan, zip-tying the cord to the control cables that run under the machine and then over to the battery. I also used the MICTUNING (love these chinese names) light bar rocker switch instead of the switch that came with the harness. It fits in one of the spare switch spots on the dash but the opening will have to be enlarged slightly. https://www.amazon.com/gp/product/B00M5YC7Q4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 There was probably an easier way to do this but my wife will tell you, I don't always pick that one. How much time did I spend? Well, at least two cigars over a two day period.

Perfect Companion for a 20" LED Light Bar on John Deere ZTrak!

I used this to connect a 20 Inch Led Light Bar Eyourlife 126W Led Fog Driving Lights Waterproof IP67 Bumper Grill Roof Tail Light Bar Truck Off road Vehicle with 180 Degree Slide Mounting Brackets + 3 YEARS WARRANTY to my John Deere ZTrak. This harness has everything you need: a good protective coating, leads so you can connect up to 2 different lights, the included mating terminals for whatever lights you want to use, fuses, the relay, and a super bright light in the switch to show you when it's "on". I'm REALLY GLAD that this company spent the extra few pennies to include the terminals and fuses, rather than forcing customers to buy them separately and hope that they picked the right ones--this takes out all of the guesswork for the end-user.

Full Reviews