- ❤NOTE: Please verify your resistor has a 2 HOLE mounting flange! For MANUAL Air Conditioning ONLY. Replaces dealer part numbers: 89019089, 15305077, 1581087, 22807122, 89018597, 973004, 3A1042, 158770, 20293, 89018439, DR775, RU371
- ❤Blower Motor Resistor Fitting for the following years and models : 2002 CADILLAC ESCALADE, 2002-2006 CHEVROLET AVALANCHE 1500 2500, 1999-2007 CHEVROLET SILVERADO 1500 2500, 2007 CHEVROLET SILVERADO 1500 CLASSIC 2500 CLASSIC 3500 CLASSIC, 2001-2007 CHEVROLET SILVERADO 3500, 2000-2006 CHEVROLET SUBURBAN 1500 2500
- ❤Durable & Safe: Our Blower Motor Resistors use imported copper core socket to prevent poor contact and prevent the current too large and burn the blower, have the advantage of impact resistance, heat resistance, aging resistance and high hardness.
- ❤Easy to intall: First, Remove the negative battery terminal; Second,Locate the blower motor resistor on the passenger side under the dash board. It is mounted to the the blower housing near the blower motor; Third, Disconnect the electrical connector to the blower motor resistor; Fourth, Remove the screws or bolts to the blower motor resistor and remove the resistor; Fifth,Installation is the reverse of the removal.
- ❤1 Year Warranty: Every Blower Motor Resistor must take inspected and tested multiple times before the shipment, if you get any problems with our this Blower Motor Resistor, please contact us in the first time, we will response it as soon as possible.
-
Information
-
Twitter
-
Pinterest
-
Youtube
-
Facebook
Pauline Rayno
Worth every penny!
Works perfectly so far. Perfect fit for my 02 silverado. This thing is over 35 bucks locally. Cant beat price here.
Amber Elizabeth Lewis
A breeze
Love the products all my fan speed from 1-4 was out only speed 5 worked. Everything works now. And easy install just some screws to remove 1-2 wire unplug. Then reverse process 10 mins project
Bradley Rollinson
Worked great and easy to replace.
I purchased this after the A/C on my truck had become limited to 3, 4 and 5. I saw a video on this and was able to swap it out for the first time in under 10 minutes.
Nisim Salinas
This is a great value that was easy to install & got air moving in no time
I was skeptical at first but this went in better than I expected. Wire hook up was a breeze and with in 15 min. I was done and had cold blowing air again at any speed I wanted. Did I save a bunch of money by waiting two days (Prime delivered on time as usual)? You bet that I did. Very satisfied with quality of construction and ease of installation. If you have issues with you blower motor not running at the speed that its set on or it does not run at all - Start here. You will find it right below the glove compartment. I had a total of four screws to deal with; two that held the plenum and two that held the Resistor. Unplug the wire block, remove and re-install new with two screws, plug wire block back in and re-install the plenum. Your done!
Jerrid D Lindsay
Nice delivery
Thank you very much
Misty Boss
Good quality great price
On time, as described and I saved a bunch of loot. Was worried about the quality due to low price but they have been installed for a few weeks and are doing what they are supposed to. Excellent value.
Angelica Nordgaard
Works great
Works great and fixed my issue
June Kiker Poston
It works great but boy what a pain in the butt to install
This resistor replacement solve the problem of my air conditioning controls not functioning across the entire range of power. I could only use three four or five. Now I can use all from 1 to 5. However the disassembly of the trim and glove area pieces on my Suburban K 2500 was easy. Replacement was easy for the particular part. But reassembling the trim and other parts took about an hour and a half. This is because of alignment issues due to things beyond the control of the resistor. Be warned this is not a 10-minute job
Bonnie Crossman
Easy and quick to use!
A perfect fit and very easy to install. Truck has heat on all fan levels now and it works!
Laurie Patino
Functional fans after 3 years of disrepair!
I absolutely LOVED this resistor. It fit perfectly in my car and it was very easy to install. I thought it was awesome that they included instructions and packaged the product well. Thanks for that! My rear fans stopped working and I was told the rear blower motor stopped working, BUT to my surprise, the rear fans began to work again when I replaced the resistor in the front. It feels really nice having working fans in my car. Onto the next repair!