Features:

  • LED INDICATOR FOR BLOWN FUSE - Easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected.
  • FUSE PROTECTION COVER - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.
  • 100 AMP RATING - Maximum of 30 Amp per circuit & 100 Amp per panel.
  • HEAVY DUTY CONSTRUCTION - This fuse panel has a #10-32 stud for power feed, .250” male quick disconnect terminals, and can take an input voltage of 10 – 32 V DC.
  • User Manual available for download under Product Information Details; Search for "Online LED Store Fuse Box" on YouTube for How To Video.
Excellent product for added safety!

This fuse block helps insure that by putting a fuse inline before LED lights that I will not have an unexpected fire from the LED shorting to ground which has happened to a number of people. It also is good from the standpoint that when you have a fuse burn out you can easily find the bad fuse by the LED indicating light is illuminated. When you are on your back in a storage bay or under a dashboard it is a real benefit to have the fault light. I use a 1 amp fuse in all applications for safety which is more than adequate for short runs of LED lights since the current draw is small. Also, on the power input lug I use an electrical rubber boot to prevent accidental contact with other items that could arc. I will certainly be using more of these as I put one in each storage bay and multiple places inside the motorhome. Should a motorhome catch fire you will have less than 4 minutes to get out so this provides a bit of added safety for you and your family.

Great looks and function

I installed this for add-on accessories on my brand new 2015 Subaru Legacy. I was installing a trailer wiring harness that required a direct battery connection and I hate having a bunch of wires hanging off the battery post so I installed this fuse block. I've only used one of the available 6 circuits so far, but I'm sure that will change as I add a radar detector and maybe a camera or two to my car. I like the idea of the red lights that illuminate when a fuse is blown. The description doesn't specifically say it, but the lights remain dark when everything is OK. If you're not using a circuit--no fuse plugged in and no wire plugged into a tab--the light for that circuit remains dark. This is good because having the light on all the time would allow for a constant drain on the battery... slight, yes, but a drain nonetheless. The plastic cover is nice and provides for a clean installation. I'd call it water resistant, but not waterproof. Also, I've installed other fuseblocks in the past that come with a rubber boot to cover the power input stud. This one didn't come with a boot so I just installed a short piece of heat shrink tubing to cover the otherwise exposed terminal. Seems like it'd be easy to accidentally touch it with a wrench or something. I've never been a big fan of sparks! One installation tip... I used glue to attach this to the side of the box that holds my OEM fuse box. If you go to the hardware store, ABS cement is perfect for this task. Look specifically for ABS cement and NOT the PVC cement... Different chemicals. The installation is pretty much permanent using this option, but I'd rather leave behind this inexpensive box when I sell this car rather than leaving empty holes from mounting and then removing this box.

Fantastic means of power distribution...

I have this installed in my (still under construction) camper trailer for off grid use. I liked the way it is designed and finding the blown fuse by means of an LED is fantastic. This is part of my control panel in the trailer.

Even Better Project Than I Anticipated

Set up two of these (one constant hot and the other tied to the ignition switch with a relay) and a bus bar for ground to avoid having multiple fuse taps on the main fuse box of my F-350. Turned out even better than I anticipated. Good little unit for the money. I must give credit where due. I saw this type of set up on a YouTube video by klowny1969 titled "how to wire a switched fuse block from scratch". Highly recommended, very detailed and successful if you just follow the directions and this product fit perfectly.

Great little device for wiring lights and power ports on my Yamaha Viking!

Great little device for wiring lights and power ports on my Yamaha Viking! I bought the 6 place unit thinking I would only use 3 or 4. Once I realized how nice it was to separate out devices on their own fuse I used all 6 positions and wish I had bought the 10 slot. Be sure to buy one with additional fuse slots because you will probably utilize separating out your circuits and use more slots than you think. The blown fuse indication is a nice feature also. I tested it with my first connections when I forgot I hadn't connected my light bar and the wires were still taped together for threading through the flex tubing...

Great for the money. Good quality

Bought this to replace a cheap block I bought at Pep Boys that fell apart. It cost more than this one but was junk. This one is solid and has a nice cover. Was very impressed for the price. Needed it to wire in fog lights, a cb radio and air horn. Handles everything great. Can't beat it for the price. Has holes for screws to attach anywhere you need. Super happy with it.

Excellent fuse block!

I haven't installed this yet, but I decided to test the blown fuse LED indicator and as you can see from the images the blown fuse lights up the led perfectly. It's surprisingly good quality for the price. Although there's a cover for the fuses, it's not waterproof, so try to keep it from getting wet. I mounted mine behind the glove box of my 1986 Ford Ranger. Pros: Built well, low price, blown fuse L.E.D. indicator lights Cons: Aside from not being more water-resistan there's no real cons for this item.

Great quality and value.

Purchased this led fuse box for the bed of my truck which is covered with a fiberglass ARE BED CAP. I’m currently using this as an alternate power fused box for led lights and usb chargers I installed back there. I have several ports on the fuse box for later expansion of any other circuits I may install later on. Nicely made product and would definitely recommend to anyone who’s asks about its quality and performance.

Great fuse block!

I am restoring an old boat that I have had for years and needed one central location for all of the fuses for lighting, bilge pump, etc. Bought two of these and have them mounted under the console. The smaller black glass fuse holders under the switches are now gone and my dash looks much cleaner. I do not believe these are water PROOF, however they do look water RESISTANT. I covered all of the connectors and openings in this block with liquid electrical tape to prevent corrosion (due to salt air- even thought the male spades on these blocks are tinned) and water entry. They work great. Have not had any issues with fuses, bad connections, fuses blowing, etc. They are about as big as the palm of your hand with four mounting holes in the center of each block (four aren't really necessary as they are light weight). I don't see the connection bolt as being 1/4 but I may be wrong. I didn't measure it.

Recommended product and great value

This is the second of these fuse boxes I have installed in vehicles for different projects and they have been a great solution. I think they are a good value for the money and I like the idea of having the light to quickly identify the blown fuse, especially in a low light environment. The only way I could see to improve this product would be if they offered a rubber or plastic cover for the positive battery connection to protect it from accidental contact with a ground wire. A bit of liquid rubber or silicone takes care of that issue just fine. I would recommend this product.

Full Reviews