Features:

  • Gives you the flexibility you need without risking bending your HDMI cables excessively which may damage the cable or even worse the ports on your expensive equipment
  • Ease the strain at the point of connection to eliminate damage to the HDMI ports on your devices
  • With gold-plated connectors that resist corrosion while offering optimum signal transfer
  • Support Audio Return Channel, HDMI Ethernet Channel and 3D
  • Support resolutions up to 4Kx2K
Works at 4k 60hz 4:4:4 YUV, with a 50 ft active cable

I recently got a 50 ft active cable and to my dismay because of the thickness of the cable, it wouldn't to as flush to the wall as usual, and pushing it against the wall was causing the picture to intermittently drop out (and immediately come back on) Well, with this adapter I can route the cable against the back of the tv and pushing the tv against the wall no longer puts strain on the cable and the ports, and best of all no more dropouts, because the connector isn't getting wiggle loose! I was afraid this wouldn't work with my active cable because of the length (it's one one the longest non fiber optic cables available), but it has no issues passing the 4k 60hz signal!

Problem solved!

TV picture blinking off and on due to previously the HDMI cable stuck straight out the back of the TV-so it was sagging down and causing connection issues. Even my duct tape sling to support the connection kept failing (:)), and I was afraid the connection would be bent or otherwise damaged. This little adapter directed the cable down and flat, so gravity isn't dragging the connection out of alignment. At first I thought it was faulty because it didn't work-then I realized I hadn't seated the connection tightly enough. Nice tight fit-works great!

Essential angle adapter for camera monitor

Great product to save strain on monitor. Plug this in and instead of a straight cable into monitor it turns 90 degrees down towards the camera mini hdmi jack. Used the other one on my tv to turn that cable downward to hide it.

Successfully Passes-Through 4k/60 & HDR10

My 4K TV only has one HDMI 2.0 port. I got this pair of adapters to hide an unpowered HDMI switch for my PS4 Pro and 4K Blu-ray Player behind the TV. Both work flawlessly as expected. It's also worth mentioning that my 4K Blu-ray player is connected by UGREEN's 30 FT Fiber Optic HDMI cable via this adapter; so even with a long active-cable into an unpowered switch and finally a 3 FT passive cable into the TV these adapters are holding up with no issues. I highly recommend this product and this brand.

They work.

These didn't quite work for the application I ordered them for... I ended up needing the bend to be 90 degrees down, instead of sideways... Not the product's fault.... But it turns out I still had a use for them on my TV. I've been using them for about a month now, with no complaints.

2 units with 2 different directions, which is a plus

You get 2 of these, one for a left turn and other with a right hand turn so one of them will work for whatever direction you’ll need.

Fit nicely for mounted television

The previous connection caused the cords for our mounted TV to be bent at unfortunate angles. Two cords broke due to the strain. These adapters allow a more natural bend that doesn't affect the placement or angle of the TV. These are a must if you like a mounted TV with no visible wires.

Very Solid

Great physical connection on both male and female ends. As it should be for my short run, video quality is not negatively impacted at all by the addition of this adapter. My use case is only 1080p PC graphics so can't comment on heavier bandwidth except that build quality suggests high manufacturing standards.

Great and perfect fit

Awesome adapter. Using it to connect to Roku and Chrome-cast. Love the design, as my TV is flushed to the wall with a small room to spare.

Nice connector

It’s a simple product, it works well, and it Amazon it’s available at a reasonable price.

Full Reviews