• KEY FOB REPLACEMENT: Replace your lost or broken remote car key fob quickly and easily with the self-programming Keyless2Go key fob
  • EASY DIY PROGRAMMING: Program your key fob replacement from your home with easy to follow instructions and a web link to a video demonstration
  • COMPATIBILITY: This keyless entry remote is compatible with a wide range of vehicles from Cadillac, Chevrolet, GMC and Hummer. Check the vehicle fitment tool above for exact compatibility.
  • PART NUMBERS: This car remote works as a replacement for FCC ID: LHJ011 and Part numbers: 21997127, 15186200 #1, 15186201 #2, 15132197 #1, 15132198 #2, 10377295, 22730827, 15186203
  • PRE-TESTED: Each car key replacement comes complete with batteries and has been pre-tested to ensure quality and functionality

Great quality, battery included. Website has good instructions, YouTube had an easy to follow video as well. My vehicle was broken into years ago and the unlock driver side button does not function anymore... So unfortunately I could not program the remote...BUT I simply swapped the electronic part of my current remote which was worn out and had lost the lock button, with the new remotes case and new buttons and it works great! I cleaned the old electronic part with a cotton swab and removed all types of sticky gunk before putting back together, and also used the included battery. I am a very happy customer because I have an extra remote with battery for future use.

I had replaced my original FOB cases a couple times, keeping the inside circuitry and just replacing the cases. But after 15+ years, they would only work RIGHT BESIDE the vehicle, and then only sometimes. : ) Thought I'd try completely new ones. Programmed them just as instructed, worked flawlessly. And now I can unlock my Avalanche from several hundred feet! And my family doesn't have to wait for me to get right beside the vehicle to get in! (I'm slow) Plus I can lock it from several hundred feet, I don't have to walk back if I forgot to lock it! Life is good! Buttons are a little "spongy", not as firm as originals, but work perfectly!

I got the 2 pack of the FOB's. I had no problem programming the first the one. however, the second one would not program and the factory set ones that came with vehicle erased and stopped working. I emailed the company and they replied asap with step by step instructions. I now have the 2 new FOB's working plus the original factory set remote FOB's ...here is the step by step instructions. Follow instructions exactly and you will have no problem. What you need to do to get the remotes working for the vehicle is to program them both while the vehicle is in programming mode (program mode is steps 1-5). Once the vehicle is in programming mode, 1) press the buttons (according to step 5 & 6) on the first remote. ( This is where I went wrong so make sure you hit the driver's side door panel first before you do the FOB) , Once the vehicle responds confirming successful programming of the first remote, press the buttons on the second remote right away. Do not hit any buttons in the vehicle or do anything else with the key before you proceed to the second remote. Once the vehicle responds to the second remote, repeat for any additional remotes. Once the vehicle has responded indicating all remotes are programmed, proceed with the procedure and exit programming mode. Once this is done all of the remotes should work. Please make sure you have all the remotes including the old ones with you. \ Take note of Step 7 on the procedure below. 1. Close all doors on the vehicle. 2. Then insert key into the ignition. 3. Press and hold the power UNLOCK button on driver’s side door panel. Do not release until instructed to do so in step 5. 4. Quickly turn the ignition ON, OFF, ON, OFF. (ON is the position just before of starting your vehicle, OFF is the position where you can pull your key out of the ignition) 5. on the driver’s side door panel, Release the power "UNLOCK" button on the driver's side door panel. The vehicle should respond by locking and unlocking automatically. 6. Hold the LOCK and UNLOCK buttons on the remote at the same time until door locks cycle again. This could take up to 30 seconds. 7. NOW repeat step 6. for all additional remotes including working ones. 8. TURN ignition to ON to exit programming mode. 9. Turn ignition OFF, remove key and test all remotes to make sure that they are all properly programmed.

It did not come with any instructions but I believe a website. We just found something on you tube for how to video and they worked perfectly to unlock and lock so far. The seat, mirror and radio station settings for driver 1 and driver 2 on original remotes doesn't work with these but to unlock and lock and give the old remotes a facelift worked perfectly.

Got tired of having to use the key to open the car doors on our 2004 Chevy Tahoe, so ordered a set of remotes from Amazon for $15. Our local Chevy dealership charges $75 per remote PLUS a $50 programming fee per key fob. ROBBERY! The remotes arrived 2 days later, I went to the website listed on the package and had them programmed within 10 minutes....it was a simple as holding the lock button down while turning the ignition key a few times, holding both buttons on the remote for about 20 seconds, then turning the key in the ignition one more time.) SUPER easy with the detailed instruction on their website, quickest $260 I've ever made! !

After years of using his key to unlock the door, I bought this for my husbands truck. I'm not very handy but I was able to program it and it took me a few tries but that was my fault! He's happy, I'm happy I don't have to wait for him to unlock the driver side door before he can unlock my side! Win win!

I was pleasantly surprised at the quality of of these remotes. I recently purchased a used Yukon Denali and it only came with a single remote and key. Got the key duplicated at Walmart for less than $2.00, and then looked around for remotes, but didn't want to spend a fortune. I found these here on Amazon and decided to give it a try, I had good luck with remotes I bought on Amazon 3 years ago. These look and feel just like the remotes that came with my Yukon. There's a link to a website on the package which has instructions that made the programming very easy. I'm very happy with my purchase.

Great price for replacement key fobs. I was concerned that they wouldn't work and did have quite a bit of trouble programming as the instructions provided on the web site did work for our vehicle. Excellent email customer service from Keyless2Go. We had trouble programming our remotes, despite the fact that they were the correct model. The email customer service was prompt and they continued to offer suggestions until we were able to successfully program the key fob remotes. Would recommend purchasing from this seller!

On my 2004 Cadillac Escalade EXT, Using just a little common sense, read & followed the programming instructions -exactly- on the small slip of paper that came with the two FOBs and a 3rd FOB already owned (must program ALL fobs you want to continue using concurrently). Driver # for each FOB will be in the order you program them. In my case Driver #1 & 2 were the new FOBs and Driver #3 was set on the reprogrammed old FOB. FOBs look and work exactly like the original equipment GM fobs. I went to our local Ace Hardware and bought two rubber covered GM look alike key blanks and had them cut on the spot for $7.27. For a total cost per key/fob of about 13 bucks each. Try that at your local GM store. I now have 3 working FOBs with keys.

Performs the intended function, looks like stock. Don't know why it says to press each button 26X to program. I skipped that and went straight to holding the vehicle's unlock button and continued from there, programmed without issue.