Features:

  • Makes a flexible connection from rigid supply line to hose reel to isolate vibrations
  • Stays flexible and easy to work with, even in the cold
  • Slides over rough surfaces without abrasion
  • Lightweight, low friction hybrid polymer resists kinking and tangling
  • Solid brass connectors never corrode and seal better than aluminum, steel, or zinc
No swivels NPT fixed both ends.

300 psi rating, makes for a stronger hose even though I only run 130 psi from my compressor. I used it for a lead hose from hard pipe to my hose reel. Would buy again.

Outstanding product

I bought two of the 6' version. One to use as a lead in hose from my compressor to the rest of my system, and another to use on my air pig. Once installed, I tested both with bubble solution, and there are no leaks whatsoever. Brass fittings are real brass. Hose seems to be natural rubber, or something that's at least as good. I'm very happy with these, especially at the price.

No leaks

Quality for the price. I just needed a short length of hose to connect my compressor to my reel. This was perfect. I only run a brad nailer and pin nailer on my compressor so my hoses don't see higher than 120 psi. I had purchased a budget one from harbor freight that leaked out of the package so spent a few bucks more and got this one.

Light and flexible with a great price for using tools at a bench or small location.

This is a great hose to use at a work bench, when you have air outlets in multiple places in one garage. It is just the right length and is much more flexible than most 3/8 hose, with no memory. The other hose I use is polyurethane 1/4" and it is like using an extension cord, but it is kinky and has a memory and I needed 3/8" for use with die grinders. I plan to order more of these short hoses for around the shop.

Nice hose, very flexible.

Needed a small flexible hose. Only had 25' available locally. This hose is so easy to work with (especially compared to the PVC hoses which always try to coil back up). I needed for my air impact wrench, only had 25' hose and the wrench didn't have enough power. I had forgotten I may need a shorter hose. When I used this shorter hose it didn't have any issues.

Good hose, well made

2nd Update: While I only use this from time to time, not on an every day basis.. I originally bought this hose in December 2015, and it is now April 2017, and the hose still looks and works like new. No problems yet. When it is used, it is still subjected to pressures of up to around 130psi on the high end too. Update:.. I have now had a lot of use out of it in the last 7 + months of use, and so far, it has worked great. I have used it on pressures as high as 120 - 130 PSI too, and so far, I have had no problems with it cracking, breaking, kinking, or anything else. So far, it has worked great.. Beats my old HF one many times over.. So as of now, I still have no complaints.. ------------------------------------------ Original review: I bought this hose to replace one from HF (I needed the hose now, and they were the best option at the time) that lasted, all of less then a year, before the rubber dried out so bad that it cracked, and blew a hole in the side. As for this one, it seems much better made, It feels much sturdier, better materials, the ends are clamped on with nice, thick well made ends. This hose, looks and feels like a high quality, well made hose. I could tell all of that even before I used it. So far, I have used it and it has held up great. Overall, I really can not say anything bad about it. It is well made, and that is what you should want in something like this. Other then that, what more is there to say. Good hose, well made, high quality, and yes, i do recommend it.

Quality air hose

Made well and working great. Keeps from having to untangle an air hose that is continuous. Make lugging around a power tool much easier.

It’s a Lead in Hose

It’s a short piece of air hose, it holds air with no issue. The price I paid was almost less than cutting up an old air hose and installing new fittings. It is great for what it is.

Used To Connect Hose Reel To Compressor

I couldn't find any 3/8 air hose shorter then 25 feet in stores. So I found this air hose and for the price and the good reviews decided to give it a try. It was packaged well and the hose threads were protected which I've never seen on other air hoses before. I used it to connect my wall mounted air filter to my compressor and my hose reel's lead in hose then connects to the other side of the filter. Great hose, very light, high quality. Definitely recommend.

A high-quality piece that will last many years without restricting airflow!

Are used this hose to connect my retracting hose reel to an air compressor . Sometimes a 25 foot hose is just too long . The hose appears to be very high-quality and I can see it lasting many years .

Full Reviews