Features:

  • Buy one dash cam, buy one dash cam mirror mount. MUST HAVE for dash cam!
  • New 7 different joints kit suitable for most car dash cam on the market, include Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE and other hot selling dash cam.
  • Mount your dash cam behind car rearview mirror, provides better drivers' view. Real 360 degree rotation design, adjust to any angle you want.
  • Exclusive 9.70mm ultra-slim design SnakeMount, suitable for most car rear view mirror.100 percent sturdy dash cam mirror mounting solution.
  • Heat-resistant. Never fall off the windshield. Never.
Perfect if you’re worried about your camera being a little loose from its original swivel.

Fits a Vantrue N2 Pro. With no wiggle and very durable. I thought at first, the original swivel from my dashcam was a little loose, but this will make it snug. It’s worth the buy for it’s price! Really easy to install. No need for any types of tools. I installed it within 10 minutes. It was just a matter of getting behind that rear view mirror and tightening everything up. Don’t waste your time thinking about it, trust me, you’ll be amazed.. I had installed it for my 2017 Jeep Patriot, in which the cylinder wasnt long enough, but I had enough to work with so everything worked out fine. I hope i helped you out a little bit with your decision making.

Read my TIP. 5 Stars

Mirror attaching mount is by far the best (mount) i have used. Easy to install, follow the directions. The different dash cam attachments are great. I have a (Rexing) the attachment clicked just right into the camera. But I did add some double sided tape to add more stability to the camera. ***The MOST*** important instruction I can give is when adjusting the angle of the camera make sure to keep the ball joint holder loose. *** I tightened the ball joint holder to tight and adjusted the camera several times only to break the ball joint from the mount. I only have one (Rexing) attachment. I was able to use another attachment with double sided tape on the (Rexing camera) all is well. My fault. ***REMEMBER DO NOT TIGHTEN THE BALL JOINT WHEN MAKING ANGLE ADJUSTMENTS, KEEP IT SLIGHTLY LOOSE*** I still gave the mount 5 stars due to the design and strength of the mount.

No need to sweat this purchase. It was better than I ever dreamed.

I have not written a lot of reviews, but I really need to for this mounting kit. I received a bag of hardware in my mailbox. I thought, “ Oh Great! I am going to have to build an ARK.” This wasn’t the case at all. The kit is very straight forward and easy to assemble for your particular dash cam. Note: I did not look at any directions. It is that simple to assemble and use. The best part is, I have a very professional looking install that isn’t held together with spit technology. ( suction cups ) I was on the phone talking to a buddy as I put everything into place. I did lay the phone down and use the speaker option when attaching to the rear view mirror. It took longer to adjust the dash cam to the specs I wanted than the rest of the process combined. I also received a nice email from the owner of the company as soon as I took delivery of the dash cam mount. If you are pondering on this purchase, there is no need to. I will buy from this vendor again and again. Many thanks 😃

Infinitely better dash cam mount than suction cups or adhesive mounts!

This mount was SUPER easy to find a match for my BlackBox DW1 among the plethora of adapters you get with this product. Instructions are very easy to follow and it took perhaps 5 minutes total to install from the moment of opening the package to having my dash camera mounted off of the mirror. I love how you can angle the mount in any direction as to get the perfect angle for your dash camera. This mount is infinitely better than suction cup mounts or adhesive mounts! No more having my dash cam fall off the front windshield due to heat or risking breaking my dash cam when it comes down with the suction mount or adhesive. I highly recommend this product; couldn't be happier. Update 6/6/2018: I have to make a note about their customer service: it is outstanding. I haven't had any issues, but twice now I have received follow-up emails ensuring that I was happy with the product, making sure I didn't have any questions or concerns, and even offering a 20% discount for a future item if I wanted it. I won't be taking the discount offer, for frankly I would rather pay a business a little more money for an outstanding product and 'old school' customer service, meaning, personal, timely, concerned, and those who genuinely value their customers. I'm happy to support AmorTek with my dollars in the future.

Sturdy mount

I used this mount 2 years ago to hang my KDlinks DX2 dashcam for a road trip out west. While a little difficult to get mounted, having to hold the silicone pad and screw at the same time, once mounted, it was rock solid. In watching my dash cam videos there was no camera shaking or movement. Now I am about to go on another road trip and couldn't find my mount. In a panic (because it is that good) I raced to Amazon to see if they still sold them. Voila! I ordered a new one.To my pleasant surprise, I see they now have holes through the silicone pad to put it through the screws to hold it in place. I guess I wasn't the only one who had problems with the previous one. I eventually found my mount but I am not sorry I bought the second one because I do like the new silicone pad better. Armed with the idea, I will punch holes in my old ones too. Also I will note that this mount comes with every kind of adapter you can think of. And I mean EVERY. It must have close to 10 different kinds. I'm not kidding, adapter after adapter came pouring out of the package. I dug through until I found the one for my camera. If one doesn't fit your camera, did you buy it from Mars or something? If I ever need a replacement adapter for my camera, I will just buy another mount. A suction mount may be easier to attach, I did one give up on this one once because I was in a hurry and couldn't get it up easily, and opted for a quick suction mount. But this mount will always be used for important dash cam road trips without question.

Works great on Outback and Crosstrek with Eyesight technology

The Subaru manual says specifically you can't mount anything to the windshield if you have the Eyesight technology and since we bought two Subarus mostly because we wanted Eyesight I'm not willing to risk compromising the functionality. This mount works just fine to mount our dash cams on the mirror support instead of the windshield, keeping the dash cam well out of range of the Eyesight cameras. Installation was easy in my Crosstrek. Because my wife's Outback has a headlight sensor already mounted on the mirror support getting everything adjusted right was a bit more of a task but it worked out in the end. There are adapters included to fit a very wide range of dash cams. One of our dashcams fell off after a few days but a dab of glue (between the adapter and the camera) solved that problem. I highly recommend these mounts for anyone who doesn't want to mount something directly to the windshield glass.

Far superior to anything else I have used

I have used 2 other mounting options, both being of the suction cup style, and this by far is better than any of those. I did have to modify the mount just a tiny bit, the part that mounts to the actual camera itself, just barely covers the USB power inlet to the camera, just enough that the plug wouldn't quite fit in the camera in it's original state. However a quick bend of this tab, or a file would have also done the job, once that tab is out of the way, all else is spot on. And the band I made did not compromise the durability, and took about 2 minutes to spot the issue, and correct it. And the fitment and durability is worth the effort to correct this simple issue. And it is worth noting, not everyone will have this same issue, if you use a different camera. My camera is an "apeman" with the power supply plugging in at the top, if you have a camera where the power supply is on the side especially, I suspect you would absolutely no problem, and needing no modification of any kind. I have nothing but good things to say about this product

Stable dash cam!

Okay so if you don't understand my headline I'll tell you this, I have tried the orignial stick on my dash cam came with and it fell off from the windshield. Try number two was industrial strength Velcro this one held well all throughout the winter but once summer hit the Velcro melted right off the windshield. My third try was a suction cup mount this one didn't fall off in the summer but in the winter it started popping right off the window and wouldn't stay on. Finally I got this one because it looked sturdy and fail proof. It came with very simple instructions I mounted it on my mirror and put the right head for my dash cam and viola it can't fall off anymore! No matter if it's not or cold this is going to stay on. It is very secure and doesn't move, so overall I am very happy with the product and would recommend to anyone trying to find a stable mount for their dash cam.

One mount that must fit just about every Dash Cam.

Deciding which mount to use rather than the stick ons "can" be a bit tricky. We lease a Honda CRV EX every three years, consequently the stick ons can be a problem as you get 2 that stick to the windshield which we leave there as we might damage the windshield trying to scrape them off. The suction cups kept falling off in cold weather. While searching for a new dash cam, I saw a camera mounted to the rear vision mirror by a mounting bracket. Now the fun begins, finding a Dash Cam & mounting that will work in unison. We chose the WheelWitness Dash Cam, now we needed a mounting. I kept noticing that one mounting company had set up their mounting in a way that you could easily see exactly which Dash Cams were compatible with their mounting. There was someone working in the "ArmorTek Snake Mount" company that had a good knowledge of marketing. We bought it and had our camera mounted "Quick & Easy". Besides making a great product, they also had it delivered on schedule as promised.

Flexible & inexpensive option for hard-mounting a dashcam

I didn't want to rely on adhesives or suction to hold my Roav A1 dashcam, so I explored some solutions to hard-mount it to the rear-view mirror stem. This kit did the trick. It comes with a handful of different t-slot adaptor sizes (I guess the industry hasn't got a standard), a decent toothed bracket for the mirror stem, a silicone strap that I did NOT use (wrapping six inches of electrical tape has the same effect, with the benefit of adhesive), and a couple of ball joints for flexible positioning. I was able to mount my camera offset to the right, semi-concealed by my rear view mirror but still with access to the camera controls, which is exactly what I'd wanted. Communication from the seller has been proactive, which warms my heart, and the packaging was secure. Installation recommendations: See my note about the electrical tape. Also, don't crank down hard on the butterfly nuts or the tightening knob; you don't need a ton of pressure to hold things in position and you'll just break plastic if you do it. Be patient in finding the right spot, then set it and forget it!

Full Reviews