Features:

  • Compatible with Apple Watch Nightstand Mode [watchOS 2]
  • [NOTE] compatible with the official Apple Watch Charger ONLY.
  • Easily place and charge your watch with the strap open or closed
  • Apple Watch Stand Compatible with Apple Watch Series 4, Series 3, Series 2, Series 1 / some cases or Spigen Tough Armor case for 42mm Apple Watch case may not be compatible.
  • Apple Watch Charger NOT INCLUDED. Patent Registered
I really love this dock

I really love this dock. It's very stable and holds the charger and the watch very well. The nano suction cups on the bottom allow it to be stuck and removed multiple times. Something I've noticed that others have complained and given this product a low rating for is the suction on the bottom coming off when removing it after placing it down. The reason it does this is due to improper removal. The way you remove it is by wiggling the dock from side to side until it eventually loosens up. DO NOT pull straight up as the suction is meant to work against this force and will ruin it. I don't know why this isn't stated in the instructions since it is pretty important to know.

Simple, minimalist, excellent.

The Spigen Apple Watch Stand works really well. Let's get that out of the way. I have very few complaints, so since it works so well, I'll just address the couple of niggles I have. 1.) I do wish there were a way for the charging cable to come straight out of the back, rather than the sides. This would tidy things up a little, though this will depend on your bedroom/desk setup. 2.) the 38mm adapter piece it comes with is a little tricky to get straight since it sticks down very easily. I suggest using a credit card to line things up against it as you stick the piece down. The nice thing is that in my experience the 42mm Watch works fine with the 38mm piece installed, too. Overall, this is an excellent stand. It does a much better job than several others I've tried, and the way it sticks to your desk is very smart. If you're looking at other stands currently, be aware if there's no lip like the Spigen, the Apple Watch will sag due to the strap weight, and I was getting obsessive about trying to balance it to get it rotated straight with a competing stand. Gaaa! I'm glad with the Spigen not to have to do this anymore. Overall, 4.5 stars out of 5. Highly recommended, especially at this low price point.

Spigen Apple Watch Stand is preferred

I bought both this Spigen Night Stand and the Orzly one, since I could not decide online. I used both stand for 4 nights each. I ended up selecting the Spigen as the keeper for these reasons: the Spigen takes up much less space on my night stand, the Spigen does not require permanent adhesive to stick in place and the Spigen does not put a sharp bend in the charge cable, and has two placement options out each side. My pictures show the side by side size difference. Used both products, both do the job, but I like the Spigen model much more.

Worth it to hold your watch charger.

This is a holder for your Apple Watch charger. It puts your watch upright so you can see it, but requires that you tap the watch or near it to wake it up. Not the holders fault, just the watches limitations. It “sticks” to your nightstand so it doesn’t slide around. I use it every night to charge my watch. It would be difficult to move it around due to the sticky bottom, so using it for travel might not work great, but you can pop out the Apple charger and leave this base when you want.

Wonderful!!

I've had this little stand for my Apple Watch for almost a year now. I use it every single night, and it's wonderful! It keeps my watch from falling off the table and getting broken or lost. The stand has a slightly sticky bottom (doesn't leave any residue), so the whole stand stays right where I put it. It's not very big, just perfect for what it's used for. I love the simplicity of it. The hole for the charger magnet holds it very snugly in place, but you can still get your charger out easily for travelling. There are two gaps for the cord itself to go into, one on each side in the back. This helps keep things tidy. I'm very happy with my purchase! I'm sure this stand has kept my watch safe over the past year just by keeping it up and out of the way, and also keeping my watch charged and ready to go.

Works great!! Love it

Makes charging your apple watch much easier. The only thing I noticed is you must push the actual charger "the magnet circle" through the whole in the stand and make it slightly stick out the front side of the stand. If you don't do this and you leave the "magnet circle" flush in the hole the watch will not always charge or start charging and then you wake up in the morning to see that the watch never charged. After figuring this out, I have not had one issue with the stand and I love it. Hope this helps someone that might be having my same issue when i first got it.

Excellent! Best Value Apple Watch Stand

This really is the best value out there. Don't pay ridiculous prices for some of these other docks when you have this one from Spigen available for next to nothing that works perfectly, takes up a small footprint and won't mar up your precious. The adhesive bottom is nice if you have a semi-permanent resting place but it works well without it. These are the same people who make some nice phone cases too so it's a not some fly by night brand (I'm always wary of those). This would make a great inexpensive gift for someone who just got an Apple watch (to date, this will work with revisions 0, 1 & 2. I've recommended it to several friends and all are super happy with the dock. *Note that the charging cable is *not* included (they are expensive!) so you might want to pick up an extra one of those.

Cheap and Effective but Only Without a Watch Case

I’m giving this 5 stars because it’s cheap and does a good job of doing what it is intended to. It doesn’t come with a charger but it’s also around $6. The quality is reasonably good and it doesn’t feel like it’s gonna break at all with regular use. I like that the design is very simple and meant to hold the watch horizontally or in nightstand mode. It was easy to set up and I appreciate that two options are given for the orientation of the cable. Also I like that they added that somewhat adhesive material to the bottom so the stand stays upright and doesn’t slight around your nightstand or desk. I should also mention that while I am using this with the 42mm Watch, that they have included a little adhesive strip to add to the stand to support the 38mm as well. This also leads me to my one fault for this stand. If you are using any type of case on your watch, your watch may not align correctly with the charger which means it won’t charge. I am currently using one of the X-Doria cases on my watch and due to the fact that it extends off the watch 2-3mm, my watch won’t charge on this stand while it’s in the case. Now I like the stand and so I’m willing to just try and modify it which should be easy. Like I said earlier, im leaving it at five stars because it’s nice, it works, it accommodates both 42mm and 38mm watches, and it was very affordable. If you don’t use a case on your watch and watch a cheaper very usable charging stand then I can easily recommend this.

Holds a 44mm Apple Watch just fine!

Got the Spigen S350 to hold a 44mm Apple Watch, and it does this rather well. Had no issues in plugging the charger into the back what-so-ever. The sticky surface is rather STICKY! Man, that stuff needs to be used a car windshield mounts! Was positioning the stand, then decided to move it. Well, it's like stuck on. Used an Uncle Bill's Sliver Griper to gently lift up on the base a couple of times, until I got got a spot that I liked. You know, bet this could even be mounted vertically on the inside of the hutch if I wanted. It did not mar up anything, and left no trails of any adhesives behind. A gentle tap on the desk awakens the watch so can see its charging status - of course I can always ask Siri and she tells me the battery readout on both iPhone and the watch. I use an Anker Elite USB Dual-Port Charger to charge with it as well, which charges the watch faster than the OEM charger and can charge an iPhone or iPad with it too. And for those that posted about the stickiness, they would be the first ones to complain if the base fell over or moved if it had no sticky surface. It works, enough said.

Excellent design

This works really well. It holds the watch at a good viewing angle and keeps it secure without "locking it in", so you can just grab it and go. No need to buckle it, just rest it on the stand. The base pad is sticky (and I believe the reviewers who said it adhered so well it left marks or residue, altho I did not experience this problem on a solid oak night stand) but could be moved about with a little effort. People reported there were difficulties charging the Series 4 44mm size watch. I think the current design has eliminated the problem if it ever existed. I believe it was people being too dumb to mount the charger correctly. So listen up: push the Apple charger into the back of the base far enough that the concave charger face snugly contacts the convex back of the watch. If you push the charger too far contact won't be maintained if the base is jarred since the magnet is the only thing holding them together and it gets overwhelmed ; too little and the two surfaces aren't in enough contact to charge consistently. But with a little common sense you can see when everything lines up properly; then leave it that way. It is rough and tumble plastic and the base is secure enough that it doesn't tip. If every < $10 product I bought was this good I'd be pretty happy.

Full Reviews