Features:

  • Type: 2 Pins (3 Pins with LED);
  • SPST: ON-OFF
  • Input: 12V, 20A
  • Light color: blue, green, yellow, red
  • Pack of 12, 3 for each color
Work well, great value.

These are nice basic toggle switches. I used one for the led lights I installed in my box truck. The other was used to power my rearview camera. Having the light to indicate it's on is a nice feature. With my cargo lights it would be obvious that they're on. However the rearview camera doesn't light up. Having that indicator on the toggle switch is a nice reminder to shut it off so my battery doesn't drain.

Terific mini switches for 12 Volt applications.

Easy to use. I needed only four switches, but this offer for twelve was the best deal I could find. I had a bit of a problem getting the correct size hole for these to fit, they were too tight in a round hole. But I finally used a file and made slots for the two plastic retainers which are supposed to help hold the switch in the hole. That worked well. The led lights come on when the switch is on and are just the right brightness. Make sure you connect the ground wire to the brass or bronze color lug and put the 12 volt power to the center post and the outgoing power to the device being powered. Easy. Standard size crimp-on lugs work perfectly with these switches. I really like them.

great little switches.

switches work great. only used 2 so far but they're good. I found it odd that the light comes on when that side of the switch is up, not when it's down. No issues at all, just backwards to how my brain thought it would be. Also, the blue is actually a better & deeper blue than what the item's picture shows. ( I was hoping the baby blue in the picture was inaccurate and it was) :)

Great deal. They work perfectly

Great deal. They work perfectly. Love having a different color LED to identify different controls on the same panel. The clip in nice a snug with the proper size hole drilled. I've used them with both push on terminals and soldering directly to the tabs. No issues. I'd order again.

Nice!!!!

I don't plan on running any more amps thru the switches than a coil in a relay so can't comment on how they control a large load. That being said they are really well made, and I have zero issues having them control the current in a control circuit running relays that turn on aux lights in my truck.

Look at the picture!!!

A lot of people ding this product for being "backward". Someone actually gave it one star because of this. Look at the pictures, folks. You can clearly see that the LED is activated when the switch is pushed away from the LED. I admit that this is opposite of what most switches do but the pictures clearly show that this is the case. Shame on me for not realizing that. These work great. Drill a 13/16" hole, crimp on quick disconnects, ground goes on the colored pin, power source goes on the middle, power out goes on the last one. Couldn't be simpler.

Good Switches. Very durable.

Switches work great. Size dimensions shown are slightly off. Hard to find the correct drill bit to cut a hole that's the perfect size for these. I purchased a forstner bit based of dimensions listed and I still had to take another drill bit and widen the hole to make them fit. They lock in perfectly. It would be nice to also have a chart indicating which polarity is which. Through trial and error, I found the correct polarities for mine.

This has to be one of the best bangs for the buck I've ever purchased on Amazon

I'd give these switches 10 stars if I could. This has to be one of the best bangs for the buck I've ever purchased on Amazon. I used 4 of the switches for lights and turn signals on my electric trike and they are perfect. The little LED lights "blink" to remind me the turn signal is on or off. I'm sure I'll use the remaining 8 switches on various projects in the near future. What a deal for well under $1 per switch. Just wire the brass colored tab to a ground wire, the middle tab to your light or appliance and the other outer tab to your incoming hot from battery. They work like a charm.

Great led switches

Needed these switches for my sons rzr ride on toy for his lights and horn that I customized. These things are a little tricky to wire up to get the little led light to come on inside them but they aren’t to bad once you learn how. I have one wired to 24v and I’ve read that the led inside the switch will not withstand the 24v but it’s going as of now. The led on the 24v is just brighter .

Great switches, bright indicator LEDs

These switches are really nice! The LED indicators light up really bright. We used a couple of these on our robot FIRST Robotics Competition. We had a blue one to toggle the blue LED underglow and a red one to toggle the red LED underglow on our robot. It worked great and they still work even after the robot went after many obstacles and got hit by other robots. We built a little button panel for these by drilling two holes the diameter of the switches and they popped right in securely with little clips to hold it once it is pushed in. My only complain is that the indicator lights are on the opposite side. So when it is off, the side with the light is pressed down and when it is on, the LED lights up but the other side of the switch is pressed down. No big deal, but it does seem a little strange. This package comes with 3 of each color: green, yellow, blue, and red.

Full Reviews