Features:

  • Color: Silver golden. Material: Zinc alloy.
  • Wrench width: about 8cm 3.15 inch. Lever length: about 21 cm 8.3inch.
  • Featured side mount design, suitable for TOTO and Kohler toilet tank.
  • To decorate your bathroom, make your life perfect and convenient.
  • Please noted that there is no install instruction, please make sure you can install it before order.
Great product although some adjustments were needed

It looks to be made much better that the original 9592 part (THU004#CP) that came off the Toto Ultimate 853 toilet - more robust and heavier. It's being a universal part was not a direct replacement, so I had to remove the square rubber washer/bumper and bend the rod in proper place. It took me a little while to adjust the rod and and chain (lengthen), but it worked like a charm thereafter. The original part was 2.5- 3 times the price of this OULII flush lever, so I recommend it to everyone if spending a little bit of time on adjusting is not critical. I'm personally very happy with the purchase!

Fits great-works well

I bought this product to replace the broken handle on my Glacier Bay toilet. Very easy to install. Like others reported, I did need to remove the rubber square around the handle for it to fit through the square hole. I used the round washer from my previous handle on the inside and it works perfectly. I will be ordering 2 more for our other toilets! Glad Amazon had the product because I wasn't able to find a good replacement in stores that didn't have to be adjusted to fit a side flushing toilet.

99% better than the original kohler

I can say that this fit well on my Kohler toilet. I had to bend the lever a little bit. But the rubber gasket fit perfectly in the square hole. Also because of the way that the bracket pivots on the toilet lever handle, it leaves the slightest bit of play in the toilet handle. Other than that I can say it's made far better than Kohler original which the bracket is made of plastic. The price was great. I took the old one off the channel lock pliers I installed the new one in I made some adjustments to the bracket and to the chain to make sure that it's low enough so the kohlor system could actually close the valve and not leak. I tested it three times and have to say that I'm very happy. I would have given it 4 and 3/4 Stars if I could. actually I am upgrading to 5 stars after a month of use.

So far, seems like an excellent product....

I purchased this lever handle because the internal parts on my original Toto handle broke apart. I chose this handle because it looked like nice quality in the photo, plus the lever was brass. My original handle was white plastic, so it wasn't imperative that the actual handle be metal. Taking it out of the box, I was impressed with my purchase. It seemed like a well built part. When I installed it, I thought at first that it wasn't going to fit...that the square portion was too large for the toilet......(as others have mentioned)... until I realized that it just took a little extra strength to tighten up the nut which pulled the square piece snugly into the little square. This made for a very nice and secure fit. I am giving this product five stars starting out because at this point, it deserves it. The quality seems excellent and the price was half that of similar offerings on Amazon. If after using this for awhile and I find it does not hold up, I will return to adjust my review and rating. So, at this point I highly recommend this product.

Perfect for a side-flush Mansfield Toilet . . . if you really tighten it down.

That worked PERFECTLY for our 15-year old side-flush Mansfield toilet. (There's no model number on the toilet, just a Mansfield stamp in the center). Anyway, we tried the plastic version that came with the so-called "Universal" replacement kit. It didn't work, and then we bought another plastic side-mount handle at Home Depot, which also didn't work. I ordered this one on Amazon. It showed up in two days, and I installed it in two minutes. The only minor issue I had was that I needed to reaaaaallly tighten down the handle from the inside, so that it fit right us next to the toilet.)

Works perfectly on Glacier Bay side flush installs in seconds by female with no experience

I bought the only option available at Home Depot. It sort of worked. But with no angle I was holding the flap up an inch while the water seeped into the bowl. I spent $1 more for this one. I installed it myself (no experience or tools) and it works perfectly. I’m absolutely delighted!

Works with Glacier Bay side flush

This worked great on a Glacier Bay side flush toilet. If you look in the pictures of the handle, you'll see that the square part that goes into the side of the tank is black - that's actually a piece of rubber that I had to remove to get the handle to fit in. With that gone it fit perfectly and it operates as expected.

Finally!!!

Fits our Glacier Bay side handle mount toilet. I tried 4 different "universal" box store toilet handles that didn't work. Incredibly frustrating. I tried adjusting and bending their arm and shortening the chain with no success. The issue was their handles didn't turn the arm far enough and lift the flapper high enough to effective evacuate the bowl. We had to hold the handle down to complete the flush and even that was difficult because the water flow was so weak, it usually needed to be done twice. This toilet handle worked immediately and lifts the flapper high enough to fully flush the toilet. Just flush it and walk away!

Easy Install

Super easy to install on my Glacier Bay toilet. As a previous reviewer mentioned you must remove the black rubber gasket to get it to fit. Not sure if this impacts performance or longevity. Looks nice and more substantial than the one that broke. Thinking of replacing my other toilet’s handle just for that reason.

Worked Great for my Toilet!

I'm so glad I found this product on Amazon. I have a toilet made by Universal-Rundle (Sears), which originally came with a chrome push-button flush lever. [photo 1] From day one, this push button was a real pain in the butt (pun intended), because it always required an uncomfortable amount of force to activate. Why the manufacturer chose a push button instead of the much more common rotating lever handle is a mystery. After some 20 years of use, the push button on my toilet finally broke. I easily found identical push button replacements on the Internet, but I didn't want to go that route again if I could help it. Lucky for me, I found this lever handle on Amazon. Like so many of the other reviewers, I also had to remove the square black rubber gasket from the replacement flush lever to get it to fit my toilet. I also had to go a step further. My toilet has an oval-shaped hole rather than a square hole in the side of the tank for the flush lever. [photo 2] The oval hole wasn't quite large enough in height for the replacement flush handle to fit, even after I removed the black rubber gasket. I used a Dremel rotary tool with a small diameter cylindrical grinding stone and ground a small amount of ceramic away at the top and bottom edges of the toilet tank's flush lever opening. It didn't take much grinding, it ended up more like polishing the edges smooth from their factory original rough finish. That's all it took and then this replacement flush lever fit and works perfectly! [photos 3 & 4] The quality and finish of this replacement OULII flush handle is quite good, especially for the price and I highly recommend it. The only thing is, it took a while to get used to the fact that our toilet now has a flush lever instead of a push button. For about a week, we kept trying to push on the side of the lever instead of rotating downward. [grin]

Full Reviews