Features:

  • FEATURES - This 4 Inch LED Fog Lights are an Excellent Replacement for the Stock JK Fog Light. They can Boost Your Vision with Greater Illumination.
  • HIGH PERFORMANCE CREE LED Chip - Super Bright, Color Temerature is 6000K and the Life-Span Reach to 50000Hrs.
  • HIGH-QUALITY - Waterproof IP67, It perform Well and Provide a Best Driving Experience in Foggy Envirmnment.
  • EASY INSTALLATION - Plug 'N' Play, Easy to Install. ( Notes: Upside Down the Plug Due to Wire Reversed Issue & Anti-Flicker Canbus ( ASIN: B01EBCEBFM ) May Need if Lights Flickering ).
  • FITMENT - Jeep 2007 - 2018 (Excluding Hard Rock Edition), Jeep Wrangler JK JKU TJ LJ Freedom Edition, Rubicon Sport, Sahara, Unlimited Hard Rock Edition, Willys Wheeler, Altitude, Dragon Edition, X Sport Utility 2-Door, 4-Door & 4 Inch Fog Light
Works on 18+ JL models!

Easy install! Fit perfectly into aftermarket bumper with plug n play wiring using stock fog light harness. I added the "Xprite LED CANBUS Anti-flicker, Error Free" inline adapters due to having a 2018 JLU with stock halogen fog lights. I'm not sure if it was required, but they lit up first try.

So far I couldn't be happier with these lights

Received and installed these a few days ago in my 2015 JKU. So far I couldn't be happier with these lights. They seem to be solidly constructed and throw off great light. These are plug and play and I have had zero flicker. There is a n alignment screw in the back but mine seemed to aimed perfectly out of the box. These throw a ton of light on the road and I can't wait to see how they do in conditions with poor visibility. I have these paired with a set of JWS Evo's and didn't want to pay almost $300 for the JWS fogs. The light color isn't an exact match between the headlights and the fogs it is close enough that I am happy with it, especially for the price. There are 2 ways that these can be installed. the first is to remove the bumper. I wasn't up for the labor on that so I went with plan be and that is to remove the plastic trim piece that lays across the top of the bumper in between the bumper and the grill. Note that you will more than likely have to drill out the plastic fasteners that hold this piece in place. I tried getting them out with a Philips head and they stripped. I drilled out the fasteners removed the piece and there was plenty of access to remove the stock fogs and install the new LED's. The whole process took maybe 25 minutes. As of now I couldn't be happier with this purchase. If anything changes with time I will update the review.

You will love them!!!

I never give reviews but I feel the need to for these lights. I just spent $488 on JW Speaker 8700J headlights for my 2016 JKU, I wanted the matching fogs but can't justify another $260. I figured I'd give these a try. I ordered the anti-flicker harness just in case. Packaging was great, well protected. Lights are really good quality. Much more beefy than OEM. Install was easy. Came with JKU/JK plug n play adapter. I had installed with the anti flicker harness and the ly flickered. I removed the anti flicker harness and they work perfect lol. To avoid any future condensation problem that may occur, I used permatex windshield glass sealant around the edge of the lens. I've used this method in the past on other Chinese made lights. I've never had condensation on any lights after doing this. These light me are bright. They don't have the throw of headlights but than again they're not suppose too, they're fog lights. You will not be dissapointed, trust me. I'm so glad I didn't spend the $260 on the JWs. I highly recommend these.

Unbelievable Brightness Compared To Stock

So these fog lights are incredibly bright compared to stock. You just won’t believe the difference until you see it (unless you already have LED fog lights). Installed with the included anti-flicker cables. Don’t know if I needed them but they don’t flicker! To install without removing the bumper, 1) watch a couple of YouTube videos and 2) just be patient and have a ratchet with an extension to get to the lag screws you need to remove. And they bolted up perfectly on my 2013 Rubicon Wrangler Unlimited. I did have to replace the two body molding clips that hold down the black horizontal trim piece (had not been removed for almost 6.5 years).

Retrofitted into my 03-04 Cobra Bumper

So I couldn't for the life of me find a stock housing/LED mixture that worked without scattered light. I went out on a limb and retrofitted a bracket to make these fit on my Mustang (2001 Mustang GT with 03-04 Cobra bumper) and they worked perfectly. The cut off is perfect and as you can see by the picture I have access to the adjustment screw. Adjustment is limited but enough. I have headlights retrofitted with Morimoto Mini 7.0's and these finished the look. I cannot kick myself enough for just doing this from the get go. If I had one complaint - the lense is some sort of soft plastic that scratches easy. If you look close enough you'll see micro scratches but nothing I would waste a star on. Just use plast-x to buff it up and it looks good as new. For the price these are great. If they aren't specific to your application, get creative and make a bracket so they mount to your application. I posted a picture of what I did. I used #10 bolts, washers, and nuts. While the picture I posted is a "prototype" you get the idea. The finished product I ended up rounding everything off cleanly and painting the bracket black with plastic paint. I used lexan from home depot. Extremely sturdy and speed/road/track tested to see what would happen under real world/speed tests. No issues.

Great Look , plug and play worked perfectly

I wanted yellow style fog lights to help in foggy situations.... I already have the JWS evolution J ... So I didn't need addition white lights .... These xprite work perfect.... They closely match the color of the turn signals so when I use them both it has a great amber look in front with or without the headlights on. This model was a direct plug and play , no splicing or reverse connection or extra wires , just plugs directly to stock plugs So far so HAPPY!!!

Great value

I was skeptical of the price but it came with an adapter for different connectors so it was plug and play. No flicker on my 07 jeep. Pure white light.

Cherokee trailhawk

I have been using some led bulbs in my factory housings in an attempt to mimic the color of my HID and DRL leds for our 2014 Jeep Cherokee. They worked for that purpose but gave next to no usable light. These have a much better light output (still not going to compete with a HID setup but that's a different price range and not a drop in replacement anyway) and the color is great. Probably a 5000k to 6000k color range. Be aware that even if you have a 2014 with the access doors you'll need to pull the fender liner for install. Drivers side is definitely easier but we managed to get both sides done in under an hour. All holes line up perfectly and the harness was plug and play with no bulb out errors. The lenses have a DOT/SAE stamp so should be legal for roadway operation. They look great with the darker trailhawk fascia

Very well built, sealed, and bright!!

These lights are awesome! I'm the type of guy that thoroughly reads the reviews before purchasing something and these looked very bright and that straight cutoff line of light that doesn't blind other drivers is a huge selling point. I sat down once I received these lights in the mail to seal them with clear rtv silicone and that's when I realized these are very very well sealed, look at the grey silicone bead around the thick plastic lens, I saw no imperfections so I only sealed where the rear wire comes out even though it didnt really need it. I posted some pictures of my Mercedes C300 retrofit, without the pivot bracket these fit perfect into the stock location. You can see that clean projector like line of light these produce, looks like about 6k light color. Also, the pictures are before installing my new Beamtech LED headlights, so the warm hologens are going bye bye. Hope this review helps! Buy them! If they don't fit, retrofit them, or install them in your girlfriends car, she won't be disappointed.

Fog lights 2015 wrangler jku

Didn't expect much for the price, but bought based on the reviews. These definitely exceeded my expectations. Super bright!!!! I took the advice posted by another reviewer and sealed around the outside with a silicone sealer since they are cheaper lights. Had them on for about a month. No issues,no regrets. If you need some bright fog lights, get these!

Full Reviews