Features:

  • ◆Compounding & Polishing & Waxing◆ There are five different colors of the sponge pad : Yellow/Orange For Heavy Cut ,Blue For Medium Cut ,White/Black For Light Cut or Finish Polish, Bring your car back to shiny! Great for removing sun abuse, car scratches, headlight wearing and etc. Yellow / Orange Heavy Cut pad suitable for removing oxidation coating and moderate to light scratches. Blue polishing pad for removing sun abuse and swirl mask. White/Black pad for finishing and waxing.
  • ◆Unique Design◆ Different size for two sides of the pad---front 6.5 inch (165mm), Back is 6 inch (150mm)---a specicial design to protect surface from being scratched while polishing, to reduce the abrasion for both pad itself, plate and surface. and it has wider compatibility for most type of compounds compare to other shape of pads such as honeycomb, waffle or diamond shape. Great choice to achieve the ideal polishing results.
  • ◆HIGH QUALITY◆ Prime quality, sponge pad, bendable, washable and reusable. Used for all kinds of coat paints waxing, polishing ,and sealing glaze, to clean and improve their lightness. The biggest advantage for our pads is to lock and remain polishing compound (prevent falling off in high speed). And they have great capacity of heat dissipation.
  • ◆ADVANCED MANUFACTURING TECHNOLOGY◆ Soft and fine workmanship, not damage the surface,Washable and save money. They are light weight and really easy to assemble. made of durable open cell foam which improves airflow, bring out the highest level showcar of shine with the ultra-smooth finishing polish pads,It lasts 4-5 cars polishing or more. It’s washable, reusable and durable. Never fall apart under the high shear force generated by the DA or RO polisher.
  • ◆EASY TO USE◆ Can be used in electric buffer such as Dual Action Polisher, Rotary Polisher, Pneumatic Polisher, Random Orbital Sander and Other Polisher. Used for Auto car detail polishing. With hook and loop backing, you can easily change the sponge. They are suggested to be washed with clean water and dried naturally after using (You also can use SPTA Polishing Pad Condition Brush To Clean the Pads. This Sets also good for Polishing resin products, tables, and floors.
Pro-detailer-I-LOVE-THESE-PADS. Comparable to lake county/griots.

Im a professional detailer. I love these pads. They spread the compound or polish you're using around almost to perfection. The design is flawless imo, the little cubes cut so well I can't recommend them enough! Great for correction or just polishing. I put these up next to Lake county pads and griots pads any-day. Also they're very well priced. They also clean easier than any pad ive used as well. A little cleaner sprayed on and a high powered air gun will clean these with ease. 10/5 stars.

Great Pads! Good Price.

Great pads. I bought 2 sets so I could do paint correction on my truck in one day. I also bought a lambs wool pad by porter cable. The yellow pad cuts really well with compound. I used my Griot's G9 RO Polisher, which is really powerful and didn't burn up any pads. I used my air compressor to blow out old compound and polish about every panel I worked on. Used 2 yellow, 1 blue, and 2 black, and the wool for my entire F250. Took about 4 hours for 3 step correction (compound, polish and wax).

These pads can cut through heavily oxidized Gel Coat

I am carving through a 1995 Catalina 250 Sail Boat Top Side White Gel Coat. The oxidation is so bad it looks like sand paper. I am using Meguiars 105, 110 and Flag Ship Wax. The 110 stays wet longer but both 105 and 110 cut the same pretty much. These pads have the ability to run for a long time without cleaning and take a lot of pressure which is what it takes to bear down through the oxidation I am fighting through but they do stay together. Be sure they are dry after cleaning I had the back come off one but I know it was damp and my fault. If you want a pad that holds together well and keeps cutting with constant cleaning these do just that. My steps for BAD Gel Coat were 1. use StarBrite Deck Cleaner, Muratic acid ( dangerous stuff be careful) for the lime deposits from our Limestone heavy lake then rinse thoroughly. The Deck Cleaner with patience and a terry cloth rag can remove some oxidation but it takes time however works in bad spots that are hard to get the buffer in. I am using the Bauer Harbor freight 79 dollar DA buffer special. Its a beast, you can lean on this buffer and it just keeps taking the punishment. Once you have your Yellow or Orange Pad on I prefer to drip the 110 on to the surface then use a small tooth brush to rub it into the oxidation. I know this sounds strange but you will be sure to work the Compound into the Gel Coat. As soon as you do that put your DA on speed 3 which is pretty fast but land the buffer pad on the surface next to the area to make it stop spinning then walk into the compound you just tooth brushed in and go slowly with firm two arm pressure and work across the surface. You will do 90% of your cut pass with this since all that material is brushed into the surface and working at full stuff, full pressure and slow speed which I have found to be really effective. I finally realized that you have to bear down on the buffer to get the compound to cut effectively. You will be amazed at the results if you follow these steps. My Gel coat was gone any one else would have got out the 3000 grit sandpaper but that is risky. Compounding seems to have a tendency to stick to the oxidation so you leave the good gel coat alone that has been cleaned. Finally after you are starting to see some sparkle wipe it all down with a micro fiber rag then by hand rub the Marine Wax into the surface being sure to cover all the shiny gel coat you just compounded. Do not worry about it drying a little. Now put your buffer at 3 to 4 and use moderate pressure and buff the surface and keep going until you see the incredible shine come through. Putting some pressure on this at first is a good idea since the Marine Wax has some oxidation removal ability which smooths out any marks the compound left and can still take some oxidation micro spots out. I like to then finish with very little pressure speed setting 3 to final super buff the finish ( same yellow pad). Its awesome. Sorry for the long post but I am sharing how I got through a lot of heavy ( 15 years+ worth) of oxidation and these PADS and the Meguiars products got me there.

Best polisher ever!

This is very affordable and durable for the use and price they offer. It comes with 5 pads and colored so you can use on any type of surface your dealing with. If you guys need help with more products let me know. It helps me perform a better job on cars Like exotics, luxury, family, etc.

Blown away with how good they are!

Ignore the negative reviews of these things “Blowing Apart”. The ONLY way these things are going to nuke themselves is if you use them at some ridiculous speed like 5,000 RPM with them spinning freely in the air and not pressed against the vehicle. I have a much older Makita Buffer that I inherited and it has a variable speed selector of 1-6 and it tells you on the side that each speed is roughly “X” RPMS, I feel like all these people having problems are people who through these things on a body grinder that can hit up to 8,000 RPMS while manybacking pads SPECIFICALLY say to not exceed 3,000 RPMs. The older buffer I think maxes out around 2,500 RPMS. Extremely good results just using the most aggressive pad, extremely easy to clean, I just turned my buffer to the lowest speed and then hit it with a hose and let it fling all the water and compound off. Very very happy with these pads, I wish I would’ve bought them years ago!!!!

Great pads, great price!

Really liked these pads. They're 6 different levels of cut depending on what you need to polish. These held up so much better than the ones from the low cost tool store that disentegrated after an hour of polishing. These are still going after many hours and days. I really like the price and for that it was a good chance that Im glad I took.

Great Quality!

These pads work as you can tell by the pics, and that's not even after the polish! The pads might have either been defective, or people didn't(use) take them off correctly, but they didn't tear on me whatsoever as some mentioned. The velcro stuck on real good, and they were easy to clean. I highly recommend these pads and will buy another set when I need more.

Awesome for the price and beginner detailer.

These were awesome. Super easy to spread compound and apply pressure with. Very happy with. Though mine don't look like the picture, the picture looks like the egg carton mattress toppers, the ones I received look like little squares cut into the buffer which worked better for how I handle my wheel. I do wish for the beginner or novice that they were labeled which pad is for which application though. That was my only complaint. My husband had a lot of questions as we moved through the processes and I think that would have helped when we were going through as to which pad to grab next.

Good replacement pads for Porter Cable Polisher

You have to add the harder of the two velcro to the pad that the polisher came with, but these things work great. Easy to remove to clean with air or water. Would buy again!

Worked great for me

I don't do a lot of car polishing or buffing but needed to restore the paint on my son's car. These pads worked great and held up fine. I've used a few of them multiple times now, just tossing them in the washing machine between uses and letting them air dry. Good value.

Full Reviews