Features:

  • Extends up to a 14" height
  • Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
  • Durable rubber padding on platform
  • Heavy-duty steel frame
  • 1100 lb. weight capacity; will not lift trikes
An excellent value, works very well.

I looked at more expensive hydraulic units but thought this might do the trick. I received it, used it to take my back wheel off of my Honda Magna. Easy. It works excellent and I just saved a bunch of money. A good value. Built well and easy to use. Definitely will recommend it to my friends and associates!

Nice stand - alternate use

Exactly what I needed... Not a motor cycle stand but used under my new window air conditioner to support the weight and get the exact right tilt to the unit. The window frame would have never supported the unit by itself. This stand makes getting the unit back out extremely easy as well. (NOTE: Using this on the cement of the back porch, not in the dirt) Just be careful to not block the air conditioner's drain hole, and keep some WD-40 on the stand to keep it healthy (repels any water).

Great Bike Jack

I've done everything you would need a jack for with this lift and I love it. It's relatively light, stores easily, works every time, and has plenty of clearance to fit under my bike. Bike has never once fell off of this guy. I lift my 99 Road King to do front and rear tire changes, oil changes (just gives me extra room to get a ratchet down there), pull the outer and inner primary, do electrical work, and just to get it up off the ground for ease of work. This jack is great for that. My bike has spent as long as 3 months while I was too busy to finish the job on it and never fell. My buddy has the other style jack (the hydraulic one like tractor supply has) and he is envious of this jack.

Great value, well built, but make sure...

Really nice for working on my Triumph. A bit of advice, make sure the bike is centered on the stand, or it WILL tip. Caught my bike once the second time I had it on the lift. Also, I use my battery powered drill to crank it up and down, really doesn't take much effort to do as the worm gear is designed nicely. I would purchase again if I was in the market for one.

very nice stand and low cost

very impressive jack, I own a 500 dollar cycle jack but I have to move my truck out of the garage to use it, I have a Polaris six wheeler that has two chains on it and a 3 wheel 50cc scooter I use around my property and need to oil the chain also plus a Harley police model that I need to raise just off the ground to turn the Harley wheels to wash and clean the wheels or push it forward a few inch's and hope I stopped it in the right spot to polish and clean the wheels, this fit the bill, wide enough to set on the ground and just raise the wheels a few inch's off the ground (don't ever plan on raising the Harley the full 14 inch's I will use my expensive lift for that, and now I won't have to lay on my side to clean the wheels on the Harley and now won't have to push the other to a few inch's ahead at a time to see more of the chains when I oil the chains,. I oiled all the moving parts on the stand with the same chain oil I use on chains and it runs up and down smooth , haven't used it yet just got it yesterday. A lot more impressive in it's mass than in the photo, pretty darn heavy duty in person very heavy plate. this is the wide model 9 X 14, sure will save my old knee's kneeling on grass rather than cement in the garage. whish I had one 10 years ago would have saved a lot of aggravation and time.

Extremely Great Value

Very nice jack. I use it to elevate my 2015 Harley Road Glide Special so I can clean the wheels without having to move it forward/backward. The motorcycle is very sturdy on the stand without using tie-downs. I would feel comfortable leaving it on the stand overnight or when storing it. I would recommend attaching your 7/8" socket to your power drill (on slow speed) to raise/lower your motorcycle a little faster. I highly recommend this jack.

Simple and effective

I was hesitant to purchase this jacket and after reading a couple reviews but am really happy with my decision. Old school tech utilizes the same jacking method scissor Jacks found in most car trunks. I slid it under a Harley Fatboy after inspecting the build quality and jacked the bike up while leaving the kickstand down and it's been in this position for a week with no creep or wobble. Only thing I wish I'd done different is maybe order the stand with the sliders.

Very heavy duty and works perfect

Bought this as a secondary unit to use along with my table lift for the Vulcan 1500. Works perfect, lifts my 800 lb 1500 easily. Easy to use and very sturdy and durable.Nice wide platform and smooth operating jack. I'm always tinkering around with my bike and having a jack is definitely a major help when working on the suspension and frame. This particular jack has done everything I've needed it to do... so far. I don't know if I would recommend trying to support the full weight of a motorcycle unless you were able to stabilize it in some way, I would be afraid of the bike falling over. I believe the asking price is very fair and I would definitely recommend this jack to someone who does their own maintenance and mods, very handy. A lot more impressive in it's mass than in the photo, pretty darn heavy duty in person very heavy plate. this is the wide model 9 X 14. Wish I had one 10 years ago would have saved a lot of aggravation and time.

Good for oil changes on a 2009 Honda Shadow Aero

I used this to change the oil on 2009 Honda Shadow Aero. Worked great and kept the motorcycle which weighs about 500 lbs solid. This is great for pouring new oil into the motorcycle because it needs to be level to check the oil correctly.

Excellent Jack

Excellent Jack. Strong, sturdy, very smoothe up and down and great balance. I’ve been using it to lift my 1946 Indian Chief and it does so effortlessly. compact and low enough to slide under my motorcycle. Good price too. I’m using a1/2 inch drive rachet with a 7/8ths socket to operate the jack. The rubber pad on top is the only thing that didn’t hold up very well.

Full Reviews