Features:

  • Pack of 10 : 3/4" Amber Light + Amber Lens Round Bullet Miniature side marker 12v DC
  • Brightness : 60 lumen each light with 3 pcs High Quality SMD LED 100,000hrs Lifr Time
  • PC lens + Waterproof + Shock Proof + Dust Proof
  • Easy to install with FREE High Quality Rubber Cover , No crack forever
  • 5 years warranty, Contact us if Broken in 5 yers. Free Replacement !!
good shipping time

good shipping time...well packaged. I have a custom built headache rack on my truck with these lights (and red ones also) on the side and back and they are excellent quality! Very bright and very good quality! I have bought these lights several times for various uses. They have always been reliable!

I see the light!

These little LED's are perfect in a variety of applications, I use them for additional backup lighting for my pickup, as additional lighting for my UTV and mirror mounted accessory lights that come on with the dome lights. The 3/4" provide a nice amount of cool white light and with both a power and ground wire you are free to mount them anywhere on any surface material. The power draw is so low it's not going to affect switching or supply load and they last! So far my bumper mounted lights are burning bright as ever after two Michigan winters. To mount them I drill the 1/2" hole, slip the stem and wires through and push a 3/4" section of rubber tubing onto the rear of the light and secure with a zip tie, it's as easy as that!

These are awesome lights. Daisy chained them all together and custom ...

These are awesome lights. Daisy chained them all together and custom made a diamond plate mount for it. The pic of my truck is just a test fit, my biggest complaint is that I had to add wires to it for the tie in, which I knew in advance, but I left it at work over night and the cleaning crew threw it away! Heart broken! I’m ordering another set and have already made another plate. I can’t wait to get the new ones. Super bright, 60lumens each

Awesome, Bright, Well-Made Little Lights

I read in many of the negative reviews before ordering this product of complaints about water getting into these lights, especially in boat trailers, as they must sometimes back into the water to off-load their boats. Every other review seemed to rave about the brightness, so, upon receiving them, I immediately slid the rubber housing off of one of the amber ones and noticed that the amber material itself was a single, seamless casting, which is great. On the back of the casting (where the electronic components are slid into place), this entire area was completely encased in resin, so I knew that wouldn't be the problem. Then, I noticed that the only thing sticking out of the resin, were the two wires, which were inside of a piece of heat shrink. Oddly, the heat shrink wasn't shrunk to the wires. So, I decided to test my theory that the water ingress was due to the fact that the heat shrink was basically acting like a straw around the wires, which would allow water to bypass the resin and seep directly into the electronics, undermining all of the other well-designed components and yes, once I dunked it into water, the problem was obvious. As I kept the heat shrink above water, there was no water ingress, once I dipped the entire open end of the heat shrink into the water, the entire light filled with water, ruining it. So, the fix is super simple, I filled the open portion of the heat shrink with elastomeric caulk, then I used a heat gun and applied heat to the shrink, and viola! A perfect seal. Now, complete submersion and no problem. I then tested a light on my benchtop power supply and ran it through voltages from 6V to 14.4V. The light did not function until about 9V, then stopped getting brighter at around 12.5V, although it functioned at 14.4V without problem. However, to prevent early failure of the LEDs, I put an H5K2 Mini-360 Buck Converter (Steph-Down Module) in-line to limit current from my RV to 12V exactly. This ensures that the LEDs will have a long, long life, as they will never receive spike voltages or continued high voltages assaulting the electronics. *I'm an electronics engineer, so I hope I haven't lost anyone and that this helps some of you out there * Anyways, thanks greatly for an overall nice product at a great price!

Good Quality Lights For An Unusual Application

I used these lights to make well lights for my driveway. I had one burning for 8 hours a night for a month before I did them all. I used 46 lights with 4 in reserve. Every one of the 46 worked, I have found no bad lights in this batch at all. These lights are completely waterproof, they get doused with water ever night by my sprinklers. How long they will last is unknown but so far so good. Oddly, I had a armadillo digging up these well lights and gnawing the cans apart. This happened to 4 of the installed lights. Armadillos can sense turned ground and look for easy digging so the bugger was digging them up lol. I solved that problem by running my 1 ton truck over the brick the well light is set in and dousing it with cayenne pepper which they hate. Anyway, despite tearing the well enclosure apart and tearing the light out of it, the lights still worked! I'd say they are pretty durable. Also I am running these on 12VAC not DC. On long runs of lights (this is about 300ft of driveway) DC has a lot of loss and it also degrades the wire faster than AC power. The system was set up to run incandescent bulbs, these draw so little power that it probably wouldn't matter but I have a VAC transformer so thats what I used. And it worked. I can confirm they run fine on 12VAC. Most will never use the lights for this purpose but if you do, it should work just fine. Will they last? I cant say but so far they have. If they burn out I wont be returning them since this is not their intended purpose but 8 hours a night for now 2 months on one of the lights is a lot of run time in a car, so I would guess they should last in a vehicle application. Of course you have shock where as a ground mounted light doesnt. At least from my experience these are very well made lights.

They r decent.. had to wire plugs on but decent

Very bright an wasn’t hard to crimp bullet plugs on an the reason I had gotten these was cause Wilson cow trailers hav special lights you can only get from them an they cost an arm n a leg. And I’d have to go way out of my way to get them. And these lights were my solution.. so far Iv replaced 5 of the Wilson lights an these penny lights are way brighter an to me look way cooler on my cow truck.. and now we wait on how long they will last.. I will update that at a later date. So far so good

Five Stars

Good lights exactly what I needed to fix my third brake light problem

Great little value marker lights!

I added these 3/4" round LED marker lights to my new new Aluma 7814 aluminum trailer. The installation was simple. The grommets are a little loose on the majority of my 3/4" holes. Either way, they really look great. It makes my new Aluma 7814 trailer really stand out!

these are great little Lights

these are great little Lights, wire is right size for the light, the red,amber and white are very bright, the smoked white and clear white are about the same brightness. I used the white with a switch to illuminate the inside of the trailer loading area and its works great. the mounting hole is a 3/4 inch however for a better snug fit I ground the bit down about 1/32 and they fit perfect. Also these lights will fit back to back in a 2" square steel tube and that made it easy to mount lights on both sides of the rail and connect wires. I was surprised these led's were made so well.

Good value

They are plenty bright and well suited for many projects. Prefect product for my application. I used them as running lights on my daughter's powerwheels jeep.

Full Reviews