Features:

  • ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor
  • ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
Great product!!

Very thin = minimal mess & quick cutting. They are tough, too! I've made over 50 cuts in various gauges of stainless (custom exhaust) and the first disc is still good.

Buy with confidence!

I just got done with a welding job that needed some small 1/8" steel parts cut, so I burned through a few of these 4-1/2" cutting discs. They cut quickly, and have a thin kerf. I would definitely buy these again!

... but no problem with these blades so far the best save me on using my plasma cutter around gas ...

I repair Rusty frames on cars trucks do custom frames cut metal but no problem with these blades so far the best save me on using my plasma cutter around gas tank to patch a frame around a gas tank I don't have to take the gas tank down and use my plasma cutter

Great for Heavy Demo Work

I'm not an expert, but my trusty saws-all was cutting slow and ate blades like crazy. So, I tried these cutting wheels with my DeWalt angle grinder. Now, I'm blasting through heavy industrial shelving much quicker and better control.

Great price, great product

I have recently decided to get into blacksmithing and needed a forge. I went a somewhat different route and picked up an old fire extinguisher and am using it. I bought an angle grinder a few weeks ago and picked up a few cut-off discs to go with it. After opening the package for the discs I just had a gut feeling that if I used the discs for anything other than a soft material then I would end up hurt so I opted to get some reputable cut-off discs. I purchased the 10 pack and I am beyond ecstatic about these discs. I had to but through the extinguisher from the top to the bottom and then connect both cuts at the top and bottom to create a lid that comes off. For you that don't know just how thick the extinguishers are, imagine cutting through something almost as thick as an Ethernet cable because that is how thick it was. I used 3 cut-off discs in the process and I am still able to use the third. The second one I was too rough with so it burned out fairly quick. Most discs will begin to crack and snap and fling shards but I never had that issue with these. If you want some quality discs that will hold and rip through thick steel then you want these. I am about to buy more just so I have them as backup. Great price, great product, and the best part is I didn't have to pull any shards out of my body when using them!

Cutters for grinders

These cutters work great. They last for quite sometime and cut very cleanly. This is a quality brand and the price is OK for me.

Great Performance on Heavy Wall Structural Tubing

I took a chance on these wheels, as I normally purchase my cut-off wheels at my local HD. These cut-off wheels well out performed the Diablo blades as far as longevity. I used these wheels to cut both straight and angled cuts on 4 x 6 x 1/4" wall structural tubing while building a heavy duty welding table, and I was blown away by how smooth they cut from the beginning, which is normally the roughest part of the cut. I also purchased a pack of the depressed version of these wheels to perform some flush cuts, and had the same results. I will definitely be purchasing these wheels moving forward, thank you Makita!

Thinner than expected

If they perform well I will change to 5 stars. Haven't had a chance to use them yet since I'm using the thicker ones for my current project. UPDATE: Got to use them today and they worked great. Was cutting mild steel though. Still I feel it was a good deal for me. UPDATE 2: These are great and have bought them again. Will continue to purchase these because they are well made, cut good and last longer than other similar more expensive cut-off wheels.

Nice clean cut

Nice clean cut. Seem to last longer than others I've used. Makita has always provided great bang for your buck and these are no exception.

Full Reviews