• Durably constructed to deliver a consistent flow pour after pour, the dual gauge regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg
  • This kit comes with two sets of ball lock keg couplers that each include both a gas in and a beer out coupler to allow you to easily tap Cornelius Pepsi home brew kegs
  • The 10" wide door mounted drip tray features a clean design and reliable stainless steel construction, and it can be easily installed using the two conveniently placed screw holes on the backsplash
  • The two NSF-approved beer faucets feature forged brass bodies with highly polished chrome finishes, brass shaft assemblies and levers with non-stick ball washers, and black ABS plastic faucet knobs
  • Includes a brand new empty 5 lb. aluminum CO2 tank made from high strength aluminum alloy with a glossy red coating that acts as an extra layer of protection against corrosion and wear

This kit is perfect for a corny keg kegerator setup. Get the tank filled at a Matheson or similar tank-filling gas supplier (don't swap at Airgas). The 5 feet of 3/16" liquid line is perfect for getting a good pressure drop which allows 10-12 PSI of CO2 tank pressure while maintaining a good low pour pressure. Regulator seems on the cheap side, but it gets the job done.

Easy installation. The only thing I don't like is the barbed connection with the plastic locks. The locks are somewhat flimsy and I am not sure how much they actually do, but that being said, I have never had any problems with the connections. This set is a great starter set and has everything you would need. You do have to look out for a place that will fill your co2 tank without swapping it out. There is only one place in my area that will do that. Praxair and those kinds of companies will only switch it out for you and typically do not have bottles this small.

Everything came in perfect condition. The CO2 regulator is of very high quality. After having my tank filled I tested all the components and found them to be working properly. My only "complaint" is that the included instructions dealt only with the regulator; they did not include any information on the system as a whole. That being said, it doesn't take a rocket scientist to put this thing together, and if you are into homebrewing, then you probably possess the aptitude to assemble this without much trouble.

I'll start by saying this conversion kit consists of all high quality parts except the faucet. Unless your drinking the beer every day, the faucet handle will become stiff and give you resistance when pouring. When the package arrived, it was all packaged very nicely, everything was secure and not scratched. I did not recieve the instruction booklet with my order and when I called they referred me to the online pdf. Beverage factory was very quick to respond to all my questions over the phone. I had a leak on the connector to the co2 tank but after a quick call he was able to locate the issue immediately and he had me tighten down a screw within the connector. CHECK ALL CONNECTIONS WITH SOAPY WATER. If I had not done this I would have never known of the leak as I could not hear it. I am very happy with my purchase and I would recommend this to anyone making a kegerator. As a side note, I did not use the two different size hole saws as they recommended I used a 7/8 hole saw only and I have had no issues! I wanted to keep the hole as small as possible to eliminate cold air escaping! Thanks beverage factory! I would buy from again considering the good customer service and high quality kit.

Everything was as listed, quality items for a decent price. And the tank was very very nice and shiny. I hate that I didn’t have anywhere to get it filled near me so I had to swap it out with an ugly one :( but this was an amazing kit to turn my stand up freezer into a keezer!

Excellent kit, comes with everything you need !

All the items included are of high quality. There are obviously no instructions that come with it but a quick glance at Youtube and some common sense and Shazzam! You got yourself a Kegarator. The C02 tank is perfect for the home brewer and 5lbs will probably last you 50g of brew or so (depends on how much pressure you set it at, whether you keep the tank on the inside or outside of the fridge, etc) The dual gauge C02 regulator is a must!!! I would never dream of trying to force carb anything without knowing the PSI you are getting.

I bought another kit from another seller who used this same exact photo. and description. I did not get Kegco parts. I go faulty junk and crappy faucets. I didn't even fill the tank, didnt trust it, sent it all back. I followed the other reviewers advice this time and bought from Beverage Factory and got EXACTLY what is pictured. Not just close, the exact everything. My only complaint about the quality is that they sent plastic hose clamps rathe than metal, but these cost a couple bucks for four of them so no biggie, just was one more trip to lowes than I expected to make. I still have zero regrets and just ordered a couple more faucets from Beverage Factory to expand my home brew offerings. Don't getting garbage to save a couple bucks if anything, get the real Kegco gear from the vendor who does it right.

initially, I ordered the wrong kit for my husband, I contacted the company, they stopped shipment of the incorrect kit, sent us this kit and my husband loves it. I am a former professional beer taster (yes, that is a thing) and my husband wants to up his home brew game. He is in process of building a draft system for both beer and nitro coffee. (and maybe some home made root beer for the kids) Will update once we have everything up and running

Easy to install, cost effective compared to others I found, and works well.