Features:

  • Easily attaches to handguns and pistols with a 20mm Picatinny rail.
  • Increase your accuracy, confidence and sight while shooting.
  • Compact, lightweight, durable.
  • Secure, optimal performance.
  • Adjustable windage and elevation (wrenches included).
compact and easy to zero

I had bought and had to have replaced 2 laser/light combos because they would not come close to zeroing in with a boresite. Just Chinese junk I guess. Finally just got an Amazon refund. So I thought well its not must to invest to try a laser by itself so with good reviews, I bought this one. It set up to zero in seconds. Now will it will stay that way at the range, I will see. But got to first base anyway. Will repost a review if it holds up.

Good sight for aiming car??? (in garage)lol

I'm not using this as a gun sight. But rather as part of a home made AIMING device for parking my car in my garage. Because of some overhead storage, there are 2 upright 2x4s that clear my front fenders by less than 2" on a side. I've tried lining up on different reference points on the car when I pull in but everything I've tried is too "Iffy". I've made a neat little bracket with a mount for the laser sight. The whole thing is very compact & slips on to my visor when I'm pulling in. After I got the car parked perfect, I just made a mark on the wall & now I just line up the laser dot when I'm pulling in. No more worry about a scraped fender. This Pinty sight is pretty well made but once sighted in on a gun, the adjustment screws need to be locked with a touch of glue or loc-tite because they turn VERY easy. Some other reviews have complained about mount screws stripping easy. I didn't have any problems but, it is made of aluminum (anodized), so you have to use care when tightening the clamp screws.

So Far So Great

So far so good. It looks good and was cheap as hell. Fit right on my Glock 45 and is really easy to adjust. I have yet to fire my gun with it on to see how well it stays sighted in, but it looks like it should have no problems. Either way, i plan to use this for home/self defense, not so much target shooting. I just want to be able to easily aim at someone without having to be focused on the sights. Given that situation already has enough things to worry about. I will update my review after i shoot with it on if there are any issues. Otherwise, its a cheap and great alternative to the $100+ lasers.

You can't do better at the price.

I'm a law enforcement officer in Oklahoma. My agency won't pay for extras. For 14$, this is a hell of a unit. The minor deficiencies are more than compensated by the 95% price savings, unless you are in a shootout twice a week, in which case your agency probably will pay for your 400$ laser sight. And it fits my Safariland level IIIa duty holsters, (labeled for the m3 lights) which few <$100x units do.

A+ customer service. A+ unit.

Update: without so much ad even asking, the seller replaced the unit that I initially complained has a flimsy button... amazing customer service and answller that is highly proud of his products and cares enough to spend the time and effort tracking and servicing its buyers. Amazing. As far as the replacement is concerned- the button in the unit was working on the replacement as expected and the unit in and of itself is well worth the money. As far as the runcan is concerned (the other unit I bought initially)- the batteries died two days after use. Here is copy of my original review. At no time was I asked to write this update. The seller was genuine is his actions. Highly recommended. Bought two laser sights cuz they were relatively cheap. This and the runcan (was few dollars cheaper). Hands down the runcan was better built, heavier, and the on/off bottun wasn’t flimsy like the pinty.

Perfect for my Remington 870 Tactical shotgun

Love this lil laser, using it with a mount on my Remington 870 Express Home Defense Pump Shotgun, works out really well when im shooting slugs, havent tested it with any other firearms, but I got a ruger mini 14 coming that I plan to use it on, but its a perfect fit for my shotgun, check out the images

Good laser sight for the price and customer service is very helpful

Edit: Just days after I posted my review, the seller offered to send me a new laser sight completely free of charge, and I didn't even have to send the old one back. My new sight seems to be working without any problems so far, and since the seller was very generous and quick to respond, I will raise my review from 3 stars to 5 stars. Original Review: I bought this laser sight for an airsoft gun I bought couple weeks back and so far it's worked fairly well. It shines brighter than the laser in my SAMLITE flashlight and is still visible over 100 feet out when it's dark outside. Adjusting the sight was easy to figure out despite the fact that it didn't come with any instructions. One issue I've noticed is that the laser gets dim to the point where it's not even visible past a couple of feet if it gets too cold. I noticed this right out of the box since it was below freezing on the day it was delivered and again when I used it outside a week later when it was around 20 degrees Fahrenheit. Overall, this is a decent sight for airsoft guns or anything else that has little to no recoil as long as you don't use it in cold weather.

SMALL LOW PROFILE LASER WORKS VERY WELL! Works on anything with a rail.

Bare with me, I'm making a very serious point here. This is a very good product and maybe this will help you have an easy installation...because it is so simple, the manufacturer didn't send instructions. The accessories that are out nowadays are a THIRD of the size of the same accessories, from just a few years! Now, everything is scaled down, AND THEY WORK BETTER!. I swapped out my very finicky Simmons high percussion scope; that thing would get knocked off if you so much SNEEZED on it!! I replaced it with a quality, tough little Quick Reflex Scope, DANG! What a difference that made. BUT, I had to get rid of the cumbersome old laser too. I didn't have room on this carbine to put it on, without looking junky again. So, when I was looking for a laser, for some reason, I just kept coming back to this same little laser. Aluminium casting. All metal. It fit on my picatinny. And the little --click-on, click-off-- switch worked perfectly. It mounted in a place near my thumb: You will have MUCH MUCH better results if you put this laser on the top rail, or the bottom rail. If you try to SIDE MOUNT this laser, it will not zero in right. It's very important to keep it inline with your rifles barrel...IMPORTANT: The two small set screws in the front of the laser? IT IS VERY IMPORTANT to turn ONE SET SCREW STRAIGHT UP, and the other set screw STRAIGHT OUT TO THE SIDE! SO, when you adjust it, it will be --just a bit up or down...and the sideways set screw will be just a tad left, or right. You see what I mean? If you just put this thing on any old way, and the set screws are off horizontally AND vertically, your going to be very frustrated as you try to "zig and zag" around. Aggravating as hell! Think about that a minute. You set the laser so that it will adjust in a cross pattern, instead of a diagonal one...If ya need help, just leave a comment. EASY TO SET UP.!! Put batteries in, but before you turn it on, look at the tiny hole that the beam will be coming out of......Using the small allen wrench, get it as.close to center as you can. Put the laser site on the rail, JUST BARELY SNUG IT. It will be REALLY CLOSE BUT YOU'LL PROBABLY HAVE TO FINE TUNE IT. Then carefully tighten everything to stay. You may have to wiggle and tighten it up a few times, so it will settle properly. I have bought one of these for everything I've got. Works great on a pistol as well. I'm even thinking about trying one on my Long Bow.

Great value!

I was blown away by how solid and reliable this thing is. At 10 bucks, I didn't expect much. It has waaay exceeded my expectations. I zeroed it at roughly 75 yards by use of my scope. After putting a few hundred 5.56 62 grain rounds through my AR, it's still dead on with my scope. Also, at night it will project over 100 yards.

Has held zero and NOT BROKEN! I’m impressed!

So for the price had little expectations. Was purchased solely to put on a kelteck 2000 9mm while trying to figure out a way to mount a more serious optic. The keltek is hinged and collapses- the perfect emergency weapon of bug out bag item. Now here is the insane part - after firing several dozen rounds this inexpensive, tiny, almost laughable to be considered anyway durable has held up to the abuse. Granted I’m shooting 9mm however the laser is holding zero! I’ll revise my review down the road but for now I’m extremely impressed, so much so I’m no longer in a quest to figure out how to add another optic or site. This has proven to be good enough. Game over!

Full Reviews