Features:

  • 【 SAVING WATER 】 - Up to 65 percent water savings compared to manual watering. Precision drip watering system delivers just the right amount of water slowly and precisely at plants’ roots
  • 【 WATERING CUSTOMIZATION 】 - Every nozzle could be adjust individually, it can set each plant to receive its customized watering according to its precise needs
  • 【 EASY INSTALLATION 】 - Simple installation without digging or plumbing skills. Simplify insertion and removal of small barbed fittings and drippers
  • 【 WATERING EFFECTIVELY 】 - Waters up to 40 plants . It can meet the water demand of different plant in one time. 0-70 L/Hour ( adjustable )
  • 【 2 FAUCET CONNECTOR 】 - Provides 2 kind of faucet connector ( threaded Faucet Connector & universal Faucet Connector ), so you do not need to worry about the facet connecting
Absolutely perfect for my needs.

I'm very, very pleased with this system. Installed it around my porch using coaxial cable clips to secure the tubing in place. It's now automatically watering my eight hanging baskets (one emitter per basket), four railing planters (two emitters per planter), and four pots (one emitter per pot.). It's quite easy to adjust the flow rate per emitter. Installation was easy enough. I secured the feed line in place in a loop starting with a tee fitting at the height of my porch railing. One end of the loop then followed the railing while the other end ran along the ceiling until they met at the far side. I boiled a cup of water in my microwave and then used that to soften the tubing to accept the fittings that then slid on easily. My timer is set to run for twenty minutes each morning and the system works perfectly. Installing the feed line in a loop helps to keep the pressure steadier along the whole loop. I'm on a well that has a 20/40 pressure switch, meaning my maximum water pressure is 40 psi and my minimum is 20, but the system works fine.

Somewhat disappointing UPDATE: Great Customer Service

As you get further away from the water source, the sprinkler heads have a tendency to drip and not shoot out the water. Also, the assembly is time-consuming. I may just go back to using a soaker hose. UPDATE: The seller contacted me and gave advice regarding the troubles I was having with the device. The seller offered me a full refund and also graciously let me keep the product. Thank you very much, Koram!

Fittings are tight, sprinklers mostly just drip.

Fittings are tight, comes with everything you need to get a drip irrigation going. Didn't expect much from the small sprinklers since I have 10 connected to one line, the majority of them just drip which is ok, but you can't really do more than one plant per sprinkler. This is ok since you can just add another line. My main line is also 2" underground and is 70 feet long. Also to mention, I have the 1/4 inch tubing coming directly from my house water line, and NOT the larger size tubing which can be made to go off into the smaller tubing the package comes with. This may largly contribute to the low pressure going into the sprinklers.

Great kit, has everything you need to set up a pretty nice system

Great kit, the faucet connectors are a bit cheap and you will need to use more plumber's tape (included) than usual when attaching the faucet connectors. I would recommend making a closed loop system when you set up yours to get the most pressure going to the nozzles without promoting leaks. I will probably buy another kit next year to expand operations.

excellent value, easy to setup and,..

been suffering from the worst drought in our area since the dust bowl. to save our shrubs and trees last year had to lay out hundreds of feet of soaker hose, deep water our trees and then get hammered by a water bill that is nearly a car payment! had hoped the drought would break but these past six months with under 2" of precip. so this drip system was a purchase made out of desperation. the water savings from a soaker hose is great but going this route is even better. though it takes a bit more time to lay out and setup once done you're good to go. *do make sure to lay a good layer of mulch e.g. grass clippings, leaves, newspaper, etc. to cover the soil where your plants are (over the drip system.) it helps greatly to keep the water from evaporating. when every drop counts this is a great way to keep things alive and healthy.

... attached and face up instead of sideways giving a better 360 degree of water

was very surprised by how well this system works i have a 5 ft by 10 ft raised bed and i used the wobe irrigation drippers instead of the ones included because the wobe has stakes attached and face up instead of sideways giving a better 360 degree of water. was hesitant at first reading some of these reviews but am happy with how it works i have 15 heads on it. 2 long strips of 120" of hose and 7 heads on each and 2 57" strips of hose creating a rectangle giving the perfect amount of pressure all heads evenly flow water out

There are ways around the low pressure of a tiny hose

It's super easy to assemble and totally modifiable. I found that reducing the garden hose size to 1/4" wasn't able to supply adequate pressure to allow as many plants as I wanted coming off of one spigot. To fix this problem, I bought a hose splitter so that there are two reducers feeding the same ring of tubing. Waters 15 plants with great pressure throughout. I'm very happy with this product. I wish it would have come with more reducers, but they're like $2.

glad i was here to notice it

The dripper hoses came loose in the hot sun from the dripper , thinking heat of sun made them looser. I put a small tie strap on after reinstalling hose to dripper, fingers crossed, glad i was here to notice it. The tee fitting hose still seem fully on so i am monitoring them for loosening. NOTE: its alot easier to get the hose onto the tee , union, & drippers fitting, if you simply leave a small flow of cold water, it seems to contract the fitting and combined with water serving as lubricant makes the hose install so much easier.

The tube included in this set is not a heavy duty one like the tube come with Rain Bird set

You still need to buy a manifold to build your system with this set.I did bought a Rain Bird 9 port manifold to make water inlet sufficient to support 20+ Drippers. The tube included in this set is not a heavy duty one like the tube come with Rain Bird set. However, the 40 Drippers is way worth the money! It can be used as an end cap if turned fully off, and can be adjusted so you can adjust the water flow on the line.

Easy, fast

This took less than an hour to install the system. Nozzles can be individually adjusted for each plant. Doing that will take some time and experimentation. With more work, each plant should have exactly what it needs. It extends the 100 feet. I needed more length and tried to connect more tubing to what was in place. I needed a second unit to do that. No water was coming to the plants beyond the 100 feet.

Full Reviews