- ★ POWERFULLY MAGNETIZED - The Olsa Tools Magnetic Screwdriver Organizer is equipped with ultra-strong rare earth (neodymium) magnets to maintain unmatched stability when you mount it on your steel surfaces.
- ★ HIGH CAPACITY - Built with 16 high tension clips that will hold your screwdrivers and other small tools firmly and securely. Your eyes are set on supreme quality when you choose Olsa Tools.
- ★ FLEXIBLE HIGH TENSION CLIPS - The clips on this magnetic screwdriver holder are specially designed to hold a multitude of different sized screwdrivers, and even some small tools. Clever tensioning system will securely hold your screwdrivers without risk of falling out.
- ★ SO EASY TO USE - It's a no-brainer with the Olsa Tools screw driver organizer. Simply slap it on almost any steel surface (vertically or horizontally) and clip your screwdrivers right in.
- ★ PROTECTION IN MIND - This magnetic tool organizer for screwdrivers carries a thin layer of foam over the neodymium magnet. We know how expensive your toolboxes can get, so we added this layer of foam to ultimately protect your investments.
-
Information
-
Twitter
-
Pinterest
-
Youtube
-
Facebook
Gary Layne
A space saver worth its price!
The key to using this holder effectively is to hang it vertically. That way you can use all the clips by way of staggering handles to opposite sides - see my photo. It makes for a nice space saver too! I hung it on the side of a steel Gladiator cabinet immediately adjacent to my pegboard, and now I have a lot of free real estate on my pegboard to hang other tools. The magnet is strong, and everything is well-made, which justifies the premium price.
Jess Alderwood
Best way I've found to store and find the correct screw drivers
WHERE HAVE YOU BEEN ALL MY LIFE??? I've always stored my screwdrivers in a tool chest and had to dig in the drawer to find the right tool. Now I have all the screwdrivers visible on the side of a metal cabinet in the garage and just put off what I need the first time around. The clamps are sufficiently strong that I can hang two screwdrivers, one upright and the other down. Each clamp can hold two completely different sized screwdrivers. A very good addition and a heck of lot more sturdy and useful than the stuff from the local Chinese hardware store.
Eun Hee Lee
Great way to organize
Strong magnet, looks nice and well made. Holds a variety of screwdrivers. Great price. Only negative is that the plastic clips have a small indent near the front and that’s where the drivers shafts are held the firmest, but it’s sometimes hard to get the shaft to stay in that cutout and not slip past into the wider “looser” portion of the clip. Overall though this is worth the money and I recommend it.
Key Tiffany Carter
The Best Gun Cleaning Rod Holder Ever.
This is the best holder I have found for my gun cleaning rods. It does not matter if they are Stainless Steel, Brass, Aluminum or Coated Steel (like the Dewey Nylon Coated Rod) it works great. Fits 22 & 30 cal rods. Fits shotgun rods and steel 45 cal GI pistol or GI M-16 rifle cleaning rods. .177 cal rods slide down until they stop at the handle. It has three magnets in the back, covered with a soft foam to keep it from scratching the finish of any cabinet. If you want to mount it on a wall you will have to drill two holes through the organizer. By the way, they also sell the clips Olsa Tools | Tool Holder Black Clips For Screwdriver Organizer (MSCWH) | 10-Pack if you want to make your own holder out of some scrap aluminum stock. I just ordered a second one for screwdrivers on my roll around tool chest.
Jennifer Tucker
Excellent quality and just what I needed for my 12-piece Wiha Torx driver set
Excellent quality and just what I needed for my 12-piece Wiha Torx driver set: https://www.amazon.com/gp/product/B000LNH7GG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 I love how the drivers simply snap into a centered slot within the plastic clips. Also, the foam padded magnet which runs the length of the anodized red organizer is extremely strong. You should have no worries about it sliding down or moving with the slightest nudge. As you can see from my attached photo, I attached this organizer onto my modular galvanized metal Wall Control pegboard. Me so happy, me love myself long time!
Saima Shahbaz
High quality product
Strong magnet and it holds all size and type of screwdrivers.
Nicaey Caird McArtney
Strong magnet but used with large handled screwdrivers will not sllow you to use every clip.
Works great. Used in tandem with Wall Control panels you cant go wrong. The magnet is very strong and holds well. Each individual clip holds strong and can accept most diameters of screw drivers or wrenches. The only negative I can say about this is if you have large handled screwdrivers you will need to space your clips accordingly to allow proper seating which does not allow a person to use every clip available. Update: I was able to utilize every clip, tho it's not ideal, it works great.
John Clark
Best magnetic screwdriver/nut driver holder!
Gosh I love this tool holder! There is quite a bit of weight on it in the picture but it holds well. If I shut the cabinet door hard it will fall off... The door isn't a really good surface. A metal pegboard would be ideal, but I really like it here. Quality is outstanding, magnets are amazing... I will be getting a few more of these!
Klara Podres
Works great in any position
I bought a new rolling tool chest and wanted a way to organize my screwdrivers instead of throwing them all in a drawer. I found this organizer thinking I could put them on the back wall of the top section of my chest. Some of the screwdrivers were too long so I tried putting the organizer on the underside of the lid. It works great. When the lid is open the screwdrivers are easy to access. The magnet on the organizer holds strong. I like the clips that hold the screwdrivers. They hold everything from my smallest to largest screwdrivers. The red anodized finish is nice too. I'm glad I bought this organizer.
Tara Freeman
Awesome Buy!!
I was a little worried the magnet wasn't going to be very strong. But I was surprised. Very strong. Has foam like material over the magnet so your toolbox or metal surface will not get scratched. Super happy holds screwdrivers very well. I work out of a service truck that's sees a lot of miles and pit hole filled dirt roads and fields.