Features:

  • 4 Heavy duty Premium double ball bearing vehicle dollies (each with 4 dual bearing swivel casters, with brakes on 2 wheels per dolly)
  • Size/Dimensions: Capacity: 1,500 lbs each (6,000 lbs total evenly distributed), plates are 15-3/4" wide x 12" long, 3" diameter wheels
  • Radial ball bearing wheel axles for smooth pushing (others don't have this!)
  • Heavy duty powder coated thick diamond plate steel construction, strong polycarbonate surface dual bearing wheel casters; each dolly has a handle for easy carrying and hanging
  • Great for shops, garages and showrooms, these dollies allow you to move cars, trucks, trailers, boats, tractors, ATVs, motorcycles, airplanes, furniture, equipment and more
I don't suggest using these if you're trying to maneuver something a lot or like on a daily basis but if you're just moving ...

These work really well for what we wanted to use them for which was to place a car at the back of our garage sideways. They are heavy duty and don't flex or bend. The casters work well and the sliding locks also work well. We needed to rely on this to place our Mustang in the back of the garage so that it wouldn't be outside and so we could still fit our other Vehicles inside. I don't suggest using these if you're trying to maneuver something a lot or like on a daily basis but if you're just moving it to one spot and then leaving it there for storage for awhile it works really well.

Really Great and Useful Product

I was really excited about getting these. I have a small outbuilding with two garden tractors which take up a lot of space and are difficult to maneuver . I ordered one set and they were very easy to assemble. I jacked up my first garden tractor and placed the four dollies under the tires. The garden tractor is easy to position and almost no effort to move accurately. I'm going to order a second set for my other tractor.

A+++++++++

My Kia Niro is on 4 of these while in storage. It is too soon to tell what it will do to the tires, but I'm hoping I don't have to replace them when I pull the car out of storage. We put the back two on and used the front-wheel drive car to back itself into the spot. While the car was moving backwards, my friend gently pushed the car sideways into place. He said he was barely using any muscle. When we were done backing up, we put the front on. We jacked up the car to put each one one with the factory jack, but had to put a board under the jack for the height needed to lift the tires that far off the ground. No big deal, just something to think about. These are solid diamond plate steel.

Built to last

Say "hello dolly" to these Vehicle Dollies. The metal plates these are made of are well finished and the coating is good and durable. Easy to assemble. Accessible fasteners for the casters means you can check them before use but the heavy duty split-compression lock washers really hold everything in place. The caster is the most important part of these items. These casters are solidly built with good quality ball bearings so they pivot easily and take the weight with no flat spots forming on the balls. Also the castor wheel and axle pin are top notch. The wheels have not had any flat spots and hasn't pitted or shown stress cracks. Plus the axle pins haven't shown any weight sag or blueing (caused by poor conditioning of the metal) from axle friction. I bought these for the roommate and he is pushing a 1978 Toyota Land Cruiser around on them so they will take some serious weight.

Stylish skates for your local skating rink

I was hesitant to purchase these dollies as, for $100, I wasn't sure about the quality. However I needed to move my early Bronco into another bay in my garage and didn't want to spend a fortune to literally move the Bronco 10 feet. The dollies arrived quickly and I was able to assemble all 4 of them with the help of an impact wrench in less than 10 minutes. I had read other reviews about the casters rolling well but not rotating/changing direction well so initially I aligned the casters on all 4 dollies in the correct orientation to move the bronco sideways. With the help of my wife I was able to easily move the Bronco over into the next bay. Regarding the casters changing direction, once it was close to the correct location I had to move the Bronco in a different direction . This required the casters to rotate 90 degrees or so. They rotated without issue--granted I had lubricated the ball bearings with lithium grease prior to putting them under the Bronco but still, they worked flawlessly. The Bronco weighs approximately 4000lbs and myself and my wife were able to move it without too much trouble. I can't yet say anything about their durability over the long term but I would recommend these and would purchase them again if I needed another set.

Ball bearings in the wheels make all the difference! Moving my '74 MGB GT is done with ease!

First let me say that if you are going back and forth looking at these and then a product that doesn't have ball bearings IN THE WHEELS, stop right now. These are what you want. I looked at other models that claim to have ball bearings, but look closely. Those claiming to have them might be talking about ball bearings in the swivel joints, not the actual wheels which is where you need them. Take a look at the photos supplied by the vendor for this product, at the time of this review the last picture on the list was a close up of the wheels showing ball bearings. Now look at a less expensive option, notice how they don't have that quarter sized metal plate in the middle, just plastic or metal wheel with a shaft.... just close that window and buy these. I got these to put a 1974 MGB GT that I would be working on in my garage but needed an easy way to move it up against the wall when winter comes so we could still park two cars in there along with this. So far I have found them to be extremely easy to move the car around. I found it a little difficult to install the wheels to the plate, all of the pliers and wrenches I have were too thick and when the top nut started to get tight they would get pinched between the metal and the caster. Would have been nice if they included a slim throw away wrench in the box. But I won't blame the product for that, I did eventually get them tightened down. Great product.

just what I needed

These dollies arrived when they said they would and put to use immediately...they work great. . I can roll the classic car I'm restoring to the center of the garage to create more perimeter work space and roll it back to the side of the garage when I need to relatively easy. Be aware however that how easy they roll is directly dependent on the weight of the object you're trying to push. In my case the car weight is 2500 lbs (+,-) with a front to back weight distribution % of 52/48 and it's amazing how much difference that extra 100 lbs on the front end makes when trying to push but that being said these are sturdy enough for my application and worth the price.

One of my favorite car related purchases.

I bought these to make moving my race car and trailer around more easily. They make it super easy to move both without having to drive them or attach a truck and try to maneuver into a good place in my 2-car garage. At one point I had my car on the trailer, then the car+trailer combo up on these dollies. Worked perfectly, allowed me to fit my daily into the garage; there's no way I could have put the trailer in the proper place with a truck attached. Love these things, would recommend.

These work well for me.

These are very adequate for what I need. I put an '82 CJ7 on these and could easily move it around in my garage with minimal effort. Nothing high tech here, just metal and wheels but the quality seems very nice and wheels rolled easily.

Perfect for Car storage

These worked perfectly to move a BMW Z4 into the back of the garage to store for the winter. Once you get the wheels facing the direction you want to move the car in, it easily pushed right into place. It can take some pushing and maneuvering to get the wheels all facing the direction you want to push, so make sure to know ahead of time and set it up to make your job easier.

Full Reviews