Features:

  • See Sylvania’s Application Guide in the Technical Details below to confirm compatibility
  • Specifically designed to withstand road vibration and provide longer life than traditional bulbs
  • Filament and gas mixture have been engineered for improved longevity
  • Meets industry regulations for performance, while bettering life expectancy
  • Produced by a trusted OEM automotive lighting manufacturer
  • Contains 2 bulbs
Perfectly good brake lights

I bought a used Mitsubishi Galant missing a brake light and decided to change both to be safe. There's not too much to say about brake lights, but these have worked perfectly fine so far, and they're very bright. I can definitely tell when they're on when I press the brake inside my garage. I've had them installed for two months and will come update this review when one or both die to give a better idea of how long they last.

Does the job

After a full inspection of my car, the mechanic wanted like $40 to replace my rear brake light. A couple of bucks for this and literally 2 minutes to install it and I was done. Most of that 2 minutes was used to identify which bulb needed to be replaced and then actually making sure it worked after it was replaced. Totally worth it!

Worked but needed an in parallel resistor to prevent hyper flash error if all turn bulbs replaced

I used these bulbs to replace the front turn indicators in my Chevy Spark EV. I had already changed the rear turn indicator bulbs for LEDs with no problems what so ever, however after replacing the front ones as well the total current drawn must have dropped below the required threshold and caused a hyperflash error (this is when the indicators flash at a higher speed then normal to indicate a failed bulb due to an unexpectedly low current draw (but in this case it was an error since all bulbs were functional). This problem was resolve by adding a load resistor in parallel with each front bulb that drew approximately 1 amp.

My son in law installed them and he said that they are much brighter than the ones he replaced.

I was driving my car behind my daughter's car. When we stopped for a traffic light on a 3 lane highway I noticed that the brake lights on my daughter's car were much dimmer than the other 2 cars next to her car. Her husband had installed some no name LED brake lights. I looked online for replacement bulbs and found these. My son in law installed them and he said that they are much brighter than the ones he installed previously. Now how about making these to work with BMW's and other cars with monitoring circuits that will indicate that the bulb is burned out or defective because LED's have a much lower resistance than incandescent bulbs. .

Installed in 2017 Beetle as DRL

I am using the 7443 in a 2017 VW Beetle as a DRL. I had originally bought a different brand last week, but those LEDs did not line up with where the filament in the original halogen bulb had been. Thus, those other bulbs did work well in the reflector housing of the Beetle and you could not even tell the bulb was on from 15 feet away. However, the Zevo 7443 bulbs work great. The bright white (not blue) color and ability to project light as VW designed means that the car is very visible on sunny days as well as adverse weather conditions. Perfect!

Works just like OEM

I bought this set of bulbs because I had a brake light go out in my Honda Odyssey. This bulb was a perfect replacement, and came with an extra for the next time a bulb pops. It was more difficult trying to figure out how to get access to the light receptacle than it was actually replacing the bulb. Thanks youtube!

These worked perfect for my 1998 Honda accord lx

These worked perfect for my 1998 Honda accord lx. Honda has the same body style from 1998- 2002 so these will definitely work for your car no matter if you have the lx or ex or dx. these bulbs you rarely need to change and so you really only need 1 but the manufacture wants to sell more bulbs so they always sell them in 2 packs to force you to buy 1 more bulb. also they get to charge you little extra because no one would pay so much for just 1 bulb. also many bulbs are interchangeable so you don't have to get the brand that was all ready in your car as long as it works your good to go. if the bulb goes out on you again you might have electrical problem so if you replaced same bulb say 2 time in same week or month or shortly in between probably not the bulb that is the issue. hope this is helpful

Super easy to replace and way cheaper than having the dealership do it

One of the brake lights was out on my wife's 2005 Toyota Highlander and the dealership wanted something $35 to replace it so I looked around and found these for $10. They arrived in a couple days and replacing it was super easy, didn't even need a single tool. I just popped open the plastic access panel, pulled out the old bulb and replaced it with one of these. I couldn't believe how easy it was. I spent more time researching what blub I needed than I did actually replacing it. Oh, and I made sure to wear a latex glove because apparently you're not supposed to touch the bulb with your skin due to the oils making it not last as long or something. I was going to replace both bulbs because I didn't want one to be brighter or a slightly different color than the other, but I ended up not doing that because this bulb is the same brightness and color as the one on the other side. So now I have a spare for whenever that one goes out.

Fits 2011 Subaru Forester

Contrary to Amazon's information, this is a proper replacement for the brake light bulb in a 2011 Subaru Forester. I love the two pack as either an option to replace both bulbs at once or to keep a spare in the car. Because it only takes a screwdriver and a few minutes to replace the brake light, I opt for the latter, keeping one of these as a spare in my glove box alongside a spare headlight bulb (which takes no tools to replace). I don't spend a lot of time looking at my brake lights, but from checking on the light once installed, I'd say this bulb looks just as bright and effective as the one that was already in the other side.

perfect fit for my Accord

I tried getting this from the local store because I was not sure if they would come intact when shipped, but, I could not find them. The item was shipped in a week and they came intact and working. Installation was very easy and there is no point in taking your car to the mechanic for such these routine maintenance tasks - 6$, 10 minutes and you are all set. Drive safe.

Full Reviews