Features:

  • HOUR METER----When equipment vibrates, display shows total run time of machine and remains visible.Help you track how many hours you put on your machine. Contains hour meter, resettable job timer, TOT hours are non-resettable; 0.1 hour accuracy
  • JOB TIMER----JOB timer (PAR ) used to measure the time of a particular work job, Like change oil, Air filter Replacement etc...; Job timer (PAR) can be reset
  • VIBRATION SENSITIVITY----Programmable vibration sensitivity (low and high),Used to accurately sense the vibration frequency of different machines during operation. Hour meter contains lock function to prevent time usage during transport
  • LOCK FUNCTION---- Hour meter contains lock function to prevent time usage during transport; When the timer is locked, it is equivalent to shutting down, no time is recorded, the display screen is closed, and the previous data is automatically saved.
  • OTHER ----Easy to install; Contains detailed instructions for use; User shutdown; Data retained after shutdown;Waterproof rating: IP68; Patent, CE ROHS certification;2-year warranty
Works exactly like it is supposed to. Mount it to a location wtih high vibration.

I alrady had one of these units on a motorcycle I purchased. it was glued to the frame with adhesive. Funny thing, the one I already had listed for 25 bucks.. It was a rebranded unit of this one. So I bought 3 of these. First unit I put on a compressor. Used the provided sticky tape, cleanded with acetone the surface on the gas engine air breather cover and stuck it there. Turned it on and thats it. Checked later and I had 1 tenth of hours on the gas engine. My engine is wired / designed to auto start / stop so the hours indication is roughly accurate according to my percieved runtime that day. Brilliant little unit for generators, compressors, tractors, and fission reactor powered Delorians. Mount the unit where you would get alot of vibrations. Like a solid frame point, right on the engine (where it wont melt). There is a hi/low sensivity. Y ou gotta test and verify the unit is reacting properly / getting enuff vibration to trigger and montitor runtime.

Wonderful value for a necessary dirt bike item

After careful review of wired (coil wrapped) and vibration sensing gauges, I chose to purchase the Runleader HM016B for my 2015 Husqvarna FC250 dirt bike. The meter includes a 3M tape backing and has holes/slots for additional zip-tie fasteners. Installation is simple: affix to the frame near the engine. Done! Operation is pretty straightforward as well: once tethered, the meter will track usage hours. Reviewing usage, total and trip, however, is not as easy and will require reading (and holding on to) the instructions printed on the cardboard back of the package. Like most single button gadgets nowadays, the user will need to be able to press and hold the button, wait three seconds then press again, etc. Not difficult, but a couple more buttons would have been a nice addition. Still, it comes down to price, and at this price point, the meter seems to be doing what its designed for. Time will tell if it holds up to water, mud, heat, braaps and growls from a European bike!

Good easy to use vibration activated run timer

Great easy to use run timer. Strapped onto Air compressor whit cable ties to monitor run time between service. No wires or setup, vibration triggers the counter.. water proof all sealed unit so you cant replace battery, but its seems very robust and works great.

Exact same as Tusk version, but cheaper!

This is the exact same model as the Tusk brand unit, just a few bucks cheaper. I stuck it to the side of my 2021 Kawasaki KLX300R frame by the steering tube and it’s stayed on well with just the 3M tape. Accuracy is great on low sensitivity mode. Doesn’t record any time when I’m hauling the bike in my truck.

Useful and needed.

A much needed item for all small engines. I have a ranch and have for years struggled on when to change the oil in my small engines. Easy to monitor. I have ordered three more to put on all equipment.

Just what I needed

Exactly what I needed to keep track of the hours on my diesel generator. 30 second installation!

Stop wasting electricity

I attached it to my air compressor and found it was running a lot more than I realized.

Works great

Seems to work great, time will tell on longevity of this unit but it works better then my buddy’s pro taper vibration hour meter.

Perfect, EASY solution.

Works great on my Diesel tractor. The peel and stick adhesive didn't work out so I glued it in place. No problem.

Works good

So far so good. Reads as it is suppose to. Easy to set up. Read out displa is a little small for me.

Full Reviews