Features:

  • Material: Soft rubber strip with 3528 SMD LED; Fitting Position: License Plate Light
  • Led light color: Red for brake and stop, Amber for turn signal
  • Size: 20.5*1.3*0.8 cm / 8*0.5*0.3"; Power Cable Length: Approx 60cm
  • Voltage: DC 12V; Waterproof Rate: IP 65; Easy Installation: Mount with 3M tape, 5 wires connection
  • Perfect turn Signal Brake light and Running tail Light all-in-one for motorcycle, Car, Trailer. Lots of Common uses
Great Product, but break out the solder and wire strippers

VERY bright. 3M adhesive works well, and shows no sign of coming off anytime soon. Wire gauge could be a little bigger, as wiring these individually requires 3-4 inches of exposed wire to be able to solder or connect to a larger wire. Waterproof, and I cannot stress how bright these are. I bought 1, and am buying a second one to install directly above it to produce an extremely intense brake and tail light so I am more visible at night.

Great Light, Great Customer Service, Easy Install.

Hello All, I purchased this light because my 2016 HD Iron 883 only has the 2 bullet lights and I didn't feel THAT safe about people being able to see me day or night. So, I originally bought a taillight that "fit" the Harley sportsters underneath the fender and was supposed to be flush. If you're looking at this review, you've probably seen what I'm talking about if you searched the sportster taillights like I did. DO NOT BUY THE BIG LIGHT I INCLUDED BELOW Motorcycle Smoke LED Stop Brake License Plate Rear Tail Light Stop Running Light for Harley(Smoke Lens) ***BUT, the one I bought was so thick! It stuck out about an inch from the bottom of the fender. Then, when my girlfriend and I 2 upped on my motorcycle, we hit a speed bump going average speed and the suspension dipped so low that it was literally DESTROYED by the wheel. Like seriously, Why would they make a light that sticks so low that it literally had less than an inch of clearance from the tire!! SO, I stumbled upon this light to replace the the poorly designed one that broke. I wanted something that had a good amount of clearance and/or was completely away from the tire altogether. This light is flexible, bright and easy to wire. The wire diagram included in the product photos is exactly how it is. Self explanatory. I did not use the turn signals as I rely on my bullet taillights as turn signals and I had originally hooked it up as a brakelight with a flashing module. I included what I used in the product link: Vehicle Brake Light Flasher Module. Safety Flash Light Alert. Universal. For Motorcycles and Cars. ***HERES THE THING.... The original light they sent me had 4 burnt out LEDs for some reason. As you can see in 3 of the photos I included, the working lights did flash when brakes were applied. However the 4 right LEDs were dead. I contacted the seller and they sent me a replacement ASAP! The seller was great and I received the new light quickly and it works with no problem at all! So thank you to the seller for providing excellent customer service! I will be highly recommending this light! Can't wait to ride my baby with the comfort of knowing that people will be able to see me clearly day/night! I included photos of it off and on and you can really see how bright they are even during the day!

These are awesome lights, I wired them only for a brake ...

These are awesome lights, I wired them only for a brake light- these will get attention. Attached are pics, the strips are really slim but extremely bright. I attached one to the license plate and 2 to my trunk. Extremely happy with quality, performance and price!!

Awesome lights but load resistor needed

Super bright and work really well but if you are replacing your tail lights on a motorcycle or something with conventional bulbs, you need to also purchase a load equalizer or resistor so your light system doesn't think you have a burnt out bulb since the LED's take so much less power. Other than not having that in there already, which you can't really expect because the lights are only ten bucks, they are great.

Bought these to replace the stock tail signals on my ...

Bought these to replace the stock tail signals on my fatboy when i decided to install hard saddle bags. The different functionalities available were a major plus as far as having different choices on how to install them. I bought 4 of these but ended up only using 2 and setting them up as red running lights and blinking high red for turn indication. I gave the other 2 to a friend who wired it to be red running lights and have the amber and red flash for turn indication.

Nice lights.

Works as it should. Easy to wire. I see people complain about how thin the wires are but considering the amount of power these require there's no need to complain. Hard to strip but not impossible. Nice lights. They are bright. Especially the brake light. Turn signals aren't as bright in a sunny day. For the price, not a bad deal. Will buy again.

Great Product!!!

Was told by several friends that my turn signals were not very visible after installing an aftermarket assembly to install saddlebags. Ordered this to add to the bottom of my fender and it works incredibly well. Very bright, highly visible even in day light.

Amazing value for the price

I've been using this light for the majority of the summer on my 78 Yamaha tracker project and I haven't had any issues whatsoever. Installation and placement is on you and this light takes care of the rest. It's super bright and easily visible from afar. I was worried that the running and brake lights would flood out the turn signals when in use but they stand out exceptionally well. After a little over 4 months and multiple involuntary rain tests it continues to work with no issues. No complaints about the adhesive either; as long as you install it on a clean, oil-free surface it won't budge. Also, since it doesn't come with a wiring diagram: Black - Ground White - Running Red - Brake Green & Yellow - Turn Signals

Works, for now...

*READ BEFORE BUYING* Alright, time for one of my many honest reviews on here. This light works. It is flexible. And I didn’t believe everybody complaining about how small the wires were coming from the light, but they are extremely small. Like 26 gauge wire. But with a careful set of hands, I managed to wire them into my stock OEM ATV brake light harness. This light comes with 5 wires. One for a negative. One for a running light. One for the bright brake light. And two for turn signals (left and right). I did not use the turn signals. So I wrapped them up and made them water tight just like I did with everything else including the connections I made to the wiring harness. As far as waterproof goes I’d give it a 3 out of 5 stars. They really didn’t do much to make any seals around both sides of the light. Even where the wire goes in, and the other side as well. But was easily fixed with silicone gasket maker and a neat electrical tape job. Over all this product may be chinese, it could be russian, I don’t care. It works. No LED’s have died yet. I got it 2 days ago and wired it up immediately. So as far as a longevity thing goes, I’ll edit my review in a month or so after I put it through the ringer and give it a full opinion compared to these stupid other reviews.

Can't be beat for the price, easy to wire.

Great light for the price. I combined it with this frame: https://www.amazon.com/gp/product/B004M29Y5O/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 and for under $14 I have a great set of additional taillights that are a lot brighter than my stock lights. The LEDs are easily visible in daylight. The housing is not waterproof (it's open at the end opposite the plug) and that is easily solved by filling it with clear silicone sealant. The five wire setup was simple to wire into my existing lights. I would hope the color coding on the wires is the same on all units, on mine it was: Black: Ground Red: Driving White: Brake Yellow: Turn (I won't say left or right because it depends on the direction you mount the light) Grey: Turn

Full Reviews